|All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.|
|SOUTH AFRICAN QUALIFICATIONS AUTHORITY|
|National Certificate: Professional Driving|
|SAQA QUAL ID||QUALIFICATION TITLE|
|50285||National Certificate: Professional Driving|
|SGB Transport and Logistics Operations|
|PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY||NQF SUB-FRAMEWORK|
|TETA - Transport Education and Training Authority||OQSF - Occupational Qualifications Sub-framework|
|National Certificate||Field 11 - Services||Transport, Operations and Logistics|
|ABET BAND||MINIMUM CREDITS||PRE-2009 NQF LEVEL||NQF LEVEL||QUAL CLASS|
|Undefined||122||Level 3||NQF Level 03||Regular-Unit Stds Based|
|REGISTRATION STATUS||SAQA DECISION NUMBER||REGISTRATION START DATE||REGISTRATION END DATE|
|LAST DATE FOR ENROLMENT||LAST DATE FOR ACHIEVEMENT|
|In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.|
This qualification replaces:
|Qual ID||Qualification Title||Pre-2009 NQF Level||NQF Level||Min Credits||Replacement Status|
|13716||National Certificate: Professional Driving||Level 3||NQF Level 03||146||Complete|
|PURPOSE AND RATIONALE OF THE QUALIFICATION|
The purpose of the qualification is to ensure competent professional driving competence in the road transport sector, thus improving earning capacity of professional drivers as well as transport sector professionalism and economic growth. The qualification is set to create an environment for growth and development of learners, by improving the employment prospects and marketable competence of drivers, and accelerating the redress of past unfair discrimination in education, training and employment opportunities. By setting the minimum standards contained in this qualification, professional driving education and training will also improve.
The professional status of drivers of commercial vehicles will be enhanced by awarding a formal qualification in recognition of their professional competence. This qualification is designed to allow maximum access to, mobility and progression within education and training, and within a career path in the transport sector. Competence achieved in this qualification provides building blocks towards NQF level 4 qualifications, and the inclusion of communication and language, and mathematic literacy requirements contributes to learner development beyond simply the requirements for professional driving.
Qualified learners are capable of:
Qualified learners also elect to achieve at least one of the following specialisations:
Learners credited with this qualification are working, or intend working, in the commercial road transport industry as drivers. This qualification builds on light vehicle driving competence, and credits competent drivers, who are driving vehicles carrying freight or passengers for commercial purposes.
The demand for this qualification lies primarily in the transport industry's requirement for drivers to have employable competence beyond that of a basic driving license and professional driving permit. Currently, more than 7000 individuals work in the sector that would benefit from this qualification. Learners can be persons entering the sector, persons already working in the sector as drivers, persons already working in the field in a non-driving capacity, and/or self employed persons within the sector.
There is a critical need in the industry to recognise learner competence regarding professional driving, and to ensure that legal requirements are adhered to. In South Africa, the transport industry is experiencing a shortage of competence in and good training for professional driving. Direct costs of poor driving include human and economic costs. Improved professional driving could influence the South African economy in direct transport, social and economic costs alone to the value of millions of Rands each year. By improving professional driving competence, road safety is improved and social and economic costs associated with road accidents are decreased.
|LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING|
|It is assumed that learners have already attained NQF Level 2 Mathematical Literacy and Communication competence.
Recognition of prior learning:
This qualification can be achieved wholly, or in part, through recognition of prior learning. Evidence can be presented in a variety of forms, including previous international or local qualifications, reports, testimonials, mentoring, functions performed, portfolios, work records and performance records. As such, evidence should be judged according to the general principles of assessment described in the notes to assessors below. Learners who have met the requirements of any Unit Standard that forms part of this qualification may apply for recognition of prior learning to the relevant Education and Training Quality Assurance body (ETQA). The applicant must be assessed against the Specific Outcomes and with the assessment criteria for the relevant Unit Standards. A qualification will be awarded should a learner demonstrate that the Exit Level Outcomes of the qualification have been attained.
Access to the qualification:
Access to the qualification is open. However, learners can only qualify if they meet all legal and medical requirements for drivers.
|RECOGNISE PREVIOUS LEARNING?|
|The qualification has a small Core Component consisting of competencies that are applicable to all professional drivers, irrespective of the type of vehicle that they drive. Competence in driving specific types of vehicles, e.g. buses, articulated trucks, etc. will be included in the Elective Component. Learners will then have to do the Fundamental Component, the Core Component and the elective standard relating to the type of vehicle in which he/she wished to be found competent as well as other relevant elective standards. Should the learner decide to drive a different vehicle, he/she can access the standard relating to that kind of vehicle and become competent in it, without having to do a whole qualification yet again.
> 123254: "Operate a vehicle combination", 20 credits.
> 123253: "Operate a rigid heavy vehicle", 15 credits. (gross vehicle mass above 3,5 tons)
> 123257: "Operate a rigid light vehicle", 10 credits. (gross vehicle mass below 3,5 tons)
By achieving one of these Unit Standards, learners achieve Compulsory Exit Level Outcome 4: "Drive a vehicle conveying a specific freight commodity or category of passengers." Because adherence to safety requirements are integrated into the above three Unit Standards, it is assumed that learners who qualify have achieved competence in terms of safety while operating a vehicle.
A learner might opt to be assessed only for certification purposes, on the type of vehicle used within his/her own context. Should the learner be assessed and declared competent on more vehicle types or codes, these can be indicated on the certificate issued. No additional credits will be awarded.
|EXIT LEVEL OUTCOMES|
|1. Obtain and communicate road transport operational information.
2. Assess loads against given permissible load requirements.
3. Plan road transport service delivery that meets specified requirements.
4. Drive a vehicle conveying a specific freight commodity or category of passengers.
5. Use computerised spreadsheets and word processing. OR
6. Plan the establishment of a small business according to relevant business principles. OR
7. Conduct vehicle maintenance according to specified procedures. OR
8. Operate lifting equipment according to specified procedures.
|ASSOCIATED ASSESSMENT CRITERIA|
Range: The vehicle can be either a heavy rigid or a vehicle combination; freight commodity or category of passengers can be general freight, or abnormal freight, or livestock, or dangerous goods, or human remains, etc. and can include commuter services, or distance coach/bus services, or tour coach services, etc.
The assessment criteria in the unit standards are performance-based, assessing applied competence, rather than only underpinning knowledge, or only skills. The Critical Cross-field Outcomes are also achieved in the unit standards. In addition to the competence assessed to achieve the unit standards, learners must demonstrate that they can achieve the Outcomes in an integrated manner. They must deal effectively with different and random demands related to occupational and learning contexts, to qualify. Assessment approaches used should be appropriate for assessing applied competence. Integrated assessment is meaningful if there are clear relationships between the purpose statement, Exit Level Outcomes and integrated assessment of this qualification.
Learners who qualify must be able to integrate concepts, ideas and behaviours across unit standards to achieve the purpose of the qualification. Evidence (as specified in the associated assessment criteria) is required that the learner is able to achieve the Exit Level Outcomes of the qualification as a whole and in an integrated way, and thus its purpose, at the time of the award of the qualification.
Evidence of integration may be presented by learners when being assessed against the unit standards, and separate assessment for integration may not be necessary. Workplace experience can be recognised when assessing towards this qualification. Integrated assessment should include observable performance as well as the quality of thinking behind such performance. Formative assessment can be employed during learning towards the unit standards and during integration to achieve Exit Level Outcomes, to ensure that integration takes place when summative assessment is employed.
|Many countries implement training programmes according to standards set by The International Road Transport Union (IRU), a world-wide organisation representing the operators of trucks, buses and taxis through its network of 156 members in 66 countries. Member countries include: Albania; Argentina; Armenia; Austria; Azerbaijan; Bahrain; Belarus; Belgium; Bosnia-Herzegovina; Brazil; Bulgaria; Canada; Chile; Croatia; Cyprus; Czech Republic; Denmark; Estonia; Finland; France; Georgia; Germany; Greece; Hungary; Iran; Ireland; Israel; Italy; Japan; Jordan; Kazakhstan; Kuwait; Kyrgyz Republic; Latvia; Lebanon; Lithuania; Luxembourg; Macedonia, former Yugoslav Republic of; Malta; Moldova; Mongolia; Morocco; Netherlands; New Zealand; Norway; Pakistan; Peoples Republic of China; Poland; Portugal; Republic of Korea; Romania; Russia; Serbie et Montenegro; Slovakia; Slovenia; Spain; Sweden; Switzerland; Syria; Tajikistan; Tunisia; Turkey; Turkmenistan; Ukraine; United Arab Emirates; United Kingdom; United States of America; Uruguay; Uzbekistan.
The IRU established training standards for a Certificate of Professional Competence for professional driving (CPC for National and International Road Haulage and Passenger Transport). Four modules are included, namely international road haulage, national road haulage, international passenger transport, and national passenger transport. The IRU requires the following components in all accredited programmes:
In the United States of America (USA), professional driver training, at the level of this qualification, takes place during classroom and behind-the-wheel instruction, the latter both on the road and in training yards. Programmes vary in length, from about three to fifteen weeks, depending on whether specialisations are included or not, and with driving experience constituting on average 30% of learning time. Learners are required to pass a national physical test, drug screen and permit testing (Commercial Driver Licence), and may be disqualified based on a driving record inconsistent with industry standards for entry level driving positions, any alcohol related violations on motor vehicle record in the preceding three years, recent felony convictions or criminal background, a history of drug or alcohol abuse, or of mental disorder, or permanent disability of physical limitations.
USA programmes address knowledge of legal requirements (permits and endorsements), rules and regulations, combination vehicles, air brakes, special rigs, control systems, vehicle management and systems, hours of service requirements, accident procedures, public and employer relations, driver-dispatcher relations, preventive maintenance and servicing, safety and mechanical issues, hazardous materials regulations (optional), double and triple trailers (optional) and tankers (optional). Practical skills required include communication, career planning, job search and job procurement, vehicle inspection, pre-trip inspections, air brake testing, diagnosing and reporting malfunctions, map reading, trip planning, keeping logs, vehicle control, shifting techniques, backing and turning, parking, hill driving, ramp driving, lane changes, speed management, space management, accident prevention, accident reporting, safe driving techniques, defensive driving techniques (including observing driving environments, and handling emergencies), visual search, hazard perception, skid control and recovery, coupling and uncoupling, handling cargo and cargo documentation, night operation, extreme driving conditions, and personal health and safety maintenance. All these aspects are addressed in the South African qualification. However, in addition to these components, the South African qualification allows for specialisation in the elective component, and address life skills, mathematic literacy, and language and communication competence. Also, the time reflected in the credit allocation for driving competence is generally higher in the South African qualification. Some USA programmes also address double trailers coupling and uncoupling, vehicle inspection, truck maintenance and repair, sliding fifth-wheels and tandems, flatbed and specialized hauling, truck towing, and special equipment operations as specialisations - of these aspects, only double trailers, coupling and uncoupling, and vehicle inspection are covered in the South African qualification.
In the United Kingdom, separate short courses are offered for various vehicle types. Training programmes are about 6 days per vehicle type (light goods vehicles between 3.5 and 7.5 tonnes; minibuses with between 8 and 17 seats; buses or coaches). This South African qualification includes both goods and passenger transport options, whereas separate qualifications are awarded in the United Kingdom for goods transportation, and passenger transportation. For goods transportation, the equivalent of the South African qualification is a Level 3 NVQ in Driving Goods Vehicles, of equal duration. The qualification requires learners to be capable of monitoring the loading of the vehicles by others, unloading the vehicle, completing pre-driving preparations, maintaining the safety and the security of the load, self and property, maintaining awareness of driving conditions, operating the vehicle systems, driving the vehicle in restricted spaces, driving the vehicle safely and efficiently on public roads. In addition, learners have to select two of the following areas of competence: obtaining information on the delivery and collection of loads, planning the route and timings for the delivery and collection of loads, loading the vehicle, and coupling and uncoupling the vehicle. The South African qualification addresses all aspects included in this qualification.
Regarding transport of passengers, the equivalent United Kingdom qualification, the NVQ in Road Passenger Transport, is at a level lower on the framework (Level 2). This qualification requires learners to be able to contribute to effective working relationships with colleagues, contribute to health and safety in your work environment, and provide professional customer care. In addition learners have to achieve seven of the following units to qualify: agree tour itineraries with clients, help passengers with special needs, contribute to the operation of the service, deal effectively with difficult passengers, drive passenger carrying vehicles safely, operate passenger systems and services, operate the passenger service, prepare for passenger carrying journeys, process fares, provide a chauffeur transport service, provide a transport service for passengers with special needs, receive and match fare payments to tickets, sort out emergencies and incidents during a journey, transport parcels and luggage, deliver reliable customer service, develop customer relationships, process customer service information, promote additional products or services to customers, resolve customer service problems, support customer service improvements, provide a security transport service, drive passenger carrying vehicles within Europe. A separate qualification (Certificate in Transporting Passengers by Bus and Coach) exists that is shorter than the NVQ and South African qualifications, and certifies professional competence at the same level as this South African qualification, for driving buses and coaches safely, bus and coach regulations, bus and coach incidents and emergencies, bus and coach vehicle safety, customer service for passenger transport, passenger transport and equal opportunities, passenger transport and disability awareness, tickets and cash handling, working within the bus and coach depot, preparing and operating the service. An important difference between this and the South African qualification is that the latter addresses business management/entrepreneurship competence.
In Canada, a distinction is made between truck drivers (semi-trailer trucks, or vehicles with more than two axles including any combination of vehicles or trucks with not more than 2 axles towing a vehicle with a registered gross vehicle weight of more than 4500 kg) and bus drivers. Equivalent programmes do not include light trucks (courier services), which is an elective in the South African qualification. Truck driver training programmes range from 3 weeks to 7 weeks for driving competence only.
Truck driver programmes include compliance with applicable Acts and regulations, vehicle definitions, vehicle systems (inc. brakes and the air brake system, engines and the fuel system, electrical system), pre-trip, en-route and post trip inspection, road signs and route following, reading maps, measurement, time and distance calculations, inspection stations (for equipment and loads), minor repairs, diagnosing and reporting malfunctions, safe vehicle operation, control systems, coupling and uncoupling, starting the engine and moving the truck, common driver mistakes and dangers, brakes and the air brake systems (inc. brake adjustment), upshifting and downshifting, care of the drivetrain, fuel conservation, backing, visual search, hazard perception, speed and space management, night operation, high-density traffic driving, adverse conditions driving, emergency manoeuvres, accident procedures, scene of accident and accident reports, ensuring safety and road worthiness, hours of service, occupational health and safety, first aid, carriage of goods, loading, weight distribution and unloading (handling cargo), dispatching, the transportation of dangerous goods, customs and immigration and weights and dimensions, securing loads, recording and maintenance of required documentation (inc. driver logbook, bills of lading etc.) by manual or electronic means, communication with the public, customers, and co-workers both verbally and in written form, employment preparation and procedures, using on-board computer and communication devices, scheduling, budgeting, and customer service. Most of these aspects are addressed in the South African qualification, as well as additional specialisations, and the South African qualification achieves more credits as a result. The South African qualification does not include dispatching, using on-board computers, and customs, immigration, and weights and dimensions specifically, although it does not explicitly exclude these.
Bus driver training in Canada generally distinguishes between different types of bus drivers, for example, those that drive buses to transport passengers along established routes to local destinations, those that drive buses to intercity or long distance destinations, those that drive sightseeing tour buses to transport passengers locally or over long distances, and those that drive buses equipped for wheelchair accessibility and aid passengers in boarding. Generic requirements include that learners are able to provide passengers with information on fares, schedules and stops, collect fares, issue transfers, check bus passes and record transactions, report delays, mechanical problems and accidents, respond in emergency situations, communicate, deal with stress, load and unload passenger luggage (optional). Specifically, school bus drivers learn to drive school buses to transport children between school and home or on excursions and ensure children's safety when boarding and leaving buses and crossing street while the bus is stopped; subway train and light rail transit operators learn to operate subway or rail transit vehicles as part of a crew, observe signals at crossings and arrival and departure points, operate controls to open and close transit vehicle doors, report delays, malfunctions and accidents to control units, and direct passengers during emergency evacuation procedures. Highway and tour bus drivers are required to be able to provide information on points of interest during trips, administer first aid, read instructions, schedules, passenger lists, and cargo waybills. The Canadian programmes are generally shorter than the South African qualification's credits imply, as training is divided into areas of specialisation.
On the New Zealand framework, a number of similar qualifications exist, namely:
The first two qualifications are the closest to this South African qualification, and are discussed in more detail.
Both New Zealand qualifications contain many lower level credits (only between 29% and 44% are at or above the level of the qualification). The National Certificate in Commercial Road Transport (Goods Service), at an equivalent level, requires learners to be able to describe and evaluate the application of road usage law, communicate information in a specified workplace, apply listening techniques, fill in a form, write an incident report, select and record routes as a road transport operator, carry out start up and shutdown procedures on a heavy motor vehicle and make ready for use, demonstrate knowledge of driving hours law and complete driving hours log book, demonstrate knowledge of heavy motor vehicle systems and components, load and unload a goods service vehicle, demonstrate knowledge of stress and health for driving, demonstrate knowledge of traffic law for the purpose of safe driving, describe driving hazards and risk reduction responses to driving hazards, apply risk reduction techniques while driving, maintain personal presentation in the workplace, and perform calculations for the workplace.
These compulsory units are spread across four levels of the framework. All these aspects are also addressed in the South African qualification, some as learning assumed to be in place. In addition to the compulsory units, between 20% and 30% of credits are selected from two lists, with between 12% and 19% of credits must be selected from the following: demonstrate knowledge of the code of practice relating to chainsaw use, operate a chainsaw, demonstrate knowledge of the log loading process, load logs using a vehicle mounted hydraulic loader in a forestry situation, operate a bell machine in a forestry or log yard situation, operate a knuckle boom loader in a forestry situation, operate a forked loader in a forestry or log yard situation, load a logging truck, operate a loader in a forestry production situation, describe effects of hydration and nutrition on safety, health and performance of forestry workers, demonstrate knowledge of factors which impair the performance of forestry workers, demonstrate knowledge of the general requirements for employment in a plantation forest, suppress fire with hand extinguishers and fixed hose reels, explain the principles of fire science, convey civil construction plant by transporter, deliver, stockpile, and spread aggregates with truck and trailer, maintain, transport, and store roadwork signs for civil construction works, service an automotive battery, demonstrate knowledge of the dangers of bitumen handling and the need for safety, and work safely with others in a petrochemical environment.
The remainder of the so-called core elective credits (between 8% and 18% of the 20% to 30%) are elected from the following domains: civil plant operation, bitumen surfacing, interpersonal communications, commercial road transport skills, goods service, transportation of waste and recoverable resources, crane operation, core driving knowledge and skills, driver licence classes, driver licence endorsements, and powered industrial lift trucks. The remainder of the qualification is composed of the strands, and includes the following compulsory units for one of the following strands:
Optional strands in addition to one of the above complete the qualification, and include:
The structure of this qualification including credits for specific units is similar to the South African qualification, with the main difference being that the New Zealand qualification contains more options for specialisation, and the South African qualification contains entrepreneurship unit standards, and combines passenger and goods transport competence in one qualification.
The New Zealand National Certificate in Commercial Road Transport (Large Passenger Service Driver) contains fewer credits than the South African qualification, and can be at a level lower, depending on the elective component. However, most of the driving units are at an equivalent level. Compulsory units are required per strand for between 39% and 61% of credits, and elective units are required per strand for between 39% and 61% of credits as follows:
The main difference, in addition to the credits, between the South African and New Zealand qualifications is that the latter contains more options for specialisation, and the South African qualification contains entrepreneurship unit standards, and combines passenger and goods transport competence in one qualification.
On the Australian framework, the equivalent of the South African qualification spans two qualifications, one at a level below and one at the equivalent level of the South African qualification. The lower level qualification addresses driver competence, and the higher level qualification requires transport operational competence. The two Certificates in Transport and Distribution (Road Transport) address competence in vehicle operations, transport sector specific operations, depot operations, supervision and leadership, and road transport small business management. The South African qualification does not address depot operations, supervision and leadership.
The lower level qualification (Certificate II in Transport and Distribution (Road Transport) focuses on safety and performance of the driver, enhancing professionalism and awareness, encouraging a positive driving attitude, and achieving Light Rigid (LR), Medium Rigid (MR), Heavy Rigid (HR) or Heavy Combination (HC) endorsements. Areas of competence required include licence test, road law, system of vehicle control, demonstration drive, pre-trip inspection, cabin checks, starting and stopping sequence, mirror checks, vehicle positioning, left and right turns, roundabouts, lane changing, overtaking, reversing, park or trailer brake start, coupling and uncoupling, occupational health and safety issues, fatigue management principles, dangerous goods, loading and unloading, tarping and tying, mechanical appreciation, route planning, and use of gears. All of these aspects are also addressed in the South African qualification.
The Certificate III in Transport and Distribution (Road Transport) requires learners to maintain container/cargo records, process receipt and delivery of containers and cargo, transfer cargo, coordinate goods to bond premises, complete receival/dispatch documentation, apply product knowledge to organise work operations, organise dispatch operations, organise receival operations, coordinate stocktakes, organise warehouse records operations, control and order stock, receive and store stock, test equipment and isolate faults, carry out maintenance of vehicles designed to carry special loads, carry out inspection of vehicles designed to carry special loads, set up and rig crane for lift, plan job and set up work areas, maintain mobile cranes, load and unload wheeled or tracked crane, undertake site inspection, de-rig, and pack and store tools and equipment. Similar to the South African qualification, it is aimed at bus drivers and truck drivers. In addition, the Australian qualification also incorporates competence required of truck offsiders, delivery drivers, furniture removalists, storepersons, transport clerks, transport managers, and transport operations officers. Therefore, the South African qualification does not address many of the above areas of competence, and is limited to the following: maintain container/cargo records, complete receival/dispatch documentation, apply product knowledge to organise work operations, carry out maintenance of vehicles designed to carry special loads, carry out inspection of vehicles designed to carry special loads, plan job and set up work areas.
|Vertical articulation is possible with NQF Level 4 qualifications through the Fundamental component.
Horizontal articulation on the NQF is possible with all NQF Level 3 qualifications through the Fundamental component, as well as:
|Moderation of assessment and accreditation of providers shall be at the discretion of a relevant ETQA as long as it complies with the SAQA requirements. The ETQA is responsible for moderation of learner achievements of learners who meet the requirements of this qualification. Particular moderation and accreditation requirements are:
|CRITERIA FOR THE REGISTRATION OF ASSESSORS|
|Assessment of learner achievements takes place at providers accredited by the relevant ETQA (RSA, 1998b) for the provision of programs that result in the outcomes specified for this qualification. Anyone assessing a learner or moderating the assessment of a learner against this qualification must be registered as an assessor with the ETQA. Assessors registered with the relevant ETQA must carry out the assessment of learners for the qualification and any of the Unit Standards that make up this qualification.
To register as an assessor, the following are required:
Assessors should keep the following general principles in mind when designing and conducting assessments:
In particular, assessors should assess that the learner demonstrates an ability to consider a range of options by:
All assessments should be conducted in line with the following well-documented principles:
|As per the SAQA Board decision/s at that time, this qualification was Reregistered in 2012; 2015.|
|This qualification replaces qualification 13716, "National Certificate: Professional Driving", Level 3, 146 credits.
The certificate issued for achievement of this qualification must clearly state the following information:
|ID||UNIT STANDARD TITLE||PRE-2009 NQF LEVEL||NQF LEVEL||CREDITS|
|Core||114941||Apply knowledge of HIV/AIDS to a specific business sector and a workplace||Level 3||NQF Level 03||4|
|Core||123258||Foster and maintain customer relations||Level 3||NQF Level 03||10|
|Core||8016||Maintaining occupational health, safety and general housekeeping||Level 3||NQF Level 03||8|
|Core||123261||Plan road transport service delivery||Level 3||NQF Level 03||8|
|Fundamental||119472||Accommodate audience and context needs in oral/signed communication||Level 3||NQF Level 03||5|
|Fundamental||9010||Demonstrate an understanding of the use of different number bases and measurement units and an awareness of error in the context of relevant calculations||Level 3||NQF Level 03||2|
|Fundamental||9013||Describe, apply, analyse and calculate shape and motion in 2-and 3-dimensional space in different contexts||Level 3||NQF Level 03||4|
|Fundamental||119457||Interpret and use information from texts||Level 3||NQF Level 03||5|
|Fundamental||9012||Investigate life and work related problems using data and probabilities||Level 3||NQF Level 03||5|
|Fundamental||119467||Use language and communication in occupational learning programmes||Level 3||NQF Level 03||5|
|Fundamental||7456||Use mathematics to investigate and monitor the financial aspects of personal, business and national issues||Level 3||NQF Level 03||5|
|Fundamental||119465||Write/present/sign texts for a range of communicative contexts||Level 3||NQF Level 03||5|
|Elective||14353||Conduct basic financial transactions||Level 2||NQF Level 02||3|
|Elective||8418||Do basic research||Level 2||NQF Level 02||4|
|Elective||119750||Inspect and lubricate an automotive system||Level 2||NQF Level 02||8|
|Elective||123262||Load general freight||Level 2||NQF Level 02||6|
|Elective||243665||Meet the requirements in order to obtain a provisional licence||Level 2||NQF Level 02||15|
|Elective||243666||Meet the requirements of being a safe driver to obtain a valid driving licence for a motor vehicle||Level 2||NQF Level 02||22|
|Elective||123257||Operate a rigid light vehicle||Level 2||NQF Level 02||10|
|Elective||116253||Operate a truck mounted loader crane||Level 2||NQF Level 02||20|
|Elective||8420||Operate in a team||Level 2||NQF Level 02||4|
|Elective||12484||Perform basic fire fighting||Level 2||NQF Level 02||4|
|Elective||15123||Select and use vehicle lifting equipment||Level 2||NQF Level 02||3|
|Elective||254154||Apply advanced techniques for operating four wheel drive (4WD) vehicles in on-road and off-road conditions||Level 3||NQF Level 03||8|
|Elective||8000||Apply basic business principles||Level 3||NQF Level 03||9|
|Elective||113852||Apply occupational health, safety and environmental principles||Level 3||NQF Level 03||10|
|Elective||254135||Apply the techniques for operating four wheel drive (4WD) vehicles, in on-road and off-road conditions||Level 3||NQF Level 03||4|
|Elective||116534||Carry out basic first aid treatment in the workplace||Level 3||NQF Level 03||2|
|Elective||113909||Coach a team member in order to enhance individual performance in work environment||Level 3||NQF Level 03||5|
|Elective||10977||Convey abnormal freight||Level 3||NQF Level 03||8|
|Elective||123259||Convey dangerous goods by road||Level 3||NQF Level 03||4|
|Elective||10976||Convey livestock||Level 3||NQF Level 03||8|
|Elective||117705||Demonstrate knowledge of the Firearms Control Act 2000 (Act No 60 of 2000) applicable to possessing a firearm||Level 3||NQF Level 03||3|
|Elective||117833||Handle a crime situation||Level 3||NQF Level 03||6|
|Elective||13917||Indicate the role of a team leader ensuring that a team meets an organisation`s standards||Level 3||NQF Level 03||6|
|Elective||117171||Manage time effectively to enhance productivity and enable a balanced lifestyle||Level 3||NQF Level 03||2|
|Elective||123260||Operate tailgates and tail-lifts||Level 3||NQF Level 03||2|
|Elective||8039||Operating cranes||Level 3||NQF Level 03||10|
|Elective||8038||Operating lift trucks||Level 3||NQF Level 03||6|
|Elective||123256||Provide commuter services||Level 3||NQF Level 03||8|
|Elective||376480||Provide first aid as an advanced first responder||Level 3||NQF Level 03||8|
|Elective||123252||Provide long distance coach/bus services||Level 3||NQF Level 03||10|
|Elective||123255||Provide tour coach services||Level 3||NQF Level 03||8|
|Elective||116940||Use a Graphical User Interface (GUI)-based spreadsheet application to solve a given problem||Level 3||NQF Level 03||6|
|Elective||114730||Comply with safety requirements in the medical pathology or blood transfusion fields||Level 4||NQF Level 04||6|
|Elective||13414||Conduct a financial analysis of a small business||Level 4||NQF Level 04||10|
|Elective||117241||Develop a business plan for a small business||Level 4||NQF Level 04||5|
|Elective||117244||Investigate the possibilities of establishing and running a small business enterprise (SMME)||Level 4||NQF Level 04||3|
|Elective||117500||Manage finance in a small business||Level 4||NQF Level 04||8|
|Elective||7997||Managing self-development||Level 4||NQF Level 04||12|
|Elective||114215||Mentor a colleague to enhance the individual`s knowledge, skills, values and attitudes in a selected career path||Level 4||NQF Level 04||3|
|Elective||123253||Operate a rigid heavy vehicle||Level 4||NQF Level 04||15|
|Elective||123254||Operate a vehicle combination||Level 4||NQF Level 04||20|
|Elective||114738||Perform financial planning and control functions for a small business||Level 4||NQF Level 04||6|
|Elective||10756||Use of a hand machine carbine||Level 4||NQF Level 04||10|
|Elective||10748||Use of a handgun||Level 4||NQF Level 04||10|
|Elective||10750||Use of a rifle||Level 4||NQF Level 04||10|
|Elective||10754||Use of a shotgun||Level 4||NQF Level 04||10|
|Elective||377201||Apply advanced driving skills: defensive driving||Level 5||NQF Level 05||6|
|Elective||377220||Apply advanced driving skills: offensive driving||Level 5||NQF Level 05||3|
|LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION:|
|When qualifications are replaced, some (but not all) of their learning programmes are moved to the replacement qualifications. If a learning programme appears to be missing from here, please check the replaced qualification.
|PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION:|
|This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
|1.||AAH Skills and Development|
|2.||ACT SKILLS DEVELOPMENT|
|3.||Afro Fleet (Pty) Ltd|
|4.||Agisanang SA Training|
|5.||Aldabri 106 Institute for Quality Pty Ltd|
|6.||Algoa Bus Company|
|7.||All-in-one Driving Academy|
|8.||Andebe Training and Skills Development|
|9.||Andzanie Trading Enterprise Pty Ltd|
|10.||Bakubung Driver Training and consultants CC|
|11.||Barloworld Transport Solutions|
|12.||Bev Short Training Consultants|
|13.||Bolton Business College & Computer Studies|
|14.||Brilliant Skills Development & Training Solutions|
|15.||Buhle-betfu Carriers pty Ltd|
|16.||Bumbene Safety Consultants (Pty) Ltd|
|18.||Centre for Logistics Excellence Pty Ltd|
|19.||CHAMDOR DRIVER TRAINING CC|
|20.||CODETA Learning Academy|
|21.||Coega Development Corporation|
|22.||Commercial professional driver academy PTY Ltd|
|23.||Commercial Transport Academy CTA Pty Ltd|
|24.||Dee's Training (PTY) LTD|
|25.||Dee-Bravo Training Centre|
|26.||Dees Driver Training Centre|
|27.||Diversity technology Training Institute|
|28.||Drive Smart Training Academy|
|31.||Dynamic Institute of Training S.A|
|32.||Edu Wize Group Pty Ltd|
|34.||Exodec 388 CC|
|35.||Fost Training Pty (Ltd)|
|36.||Gerotek Test Facilities|
|37.||Global Safety Training & Skills Dev Standards|
|38.||Golden Arrow Bus Services_pty Ltd|
|39.||GREENRIM TRAINING PTY LTD|
|40.||Hazchemwize PTY Ltd|
|41.||He and She Driver Training Centre|
|42.||Ikaheng HR Solutions Pty Ltd|
|43.||Ikusasa Lethu Projects and Training (Pty) Ltd|
|44.||Impact Skills Development (Pty) Ltd|
|46.||Innovative Shared Services|
|48.||Iyanda Holdings(Pty) Ltd|
|49.||Kahisano Skills Development and Training|
|50.||KDS Centre for Skills Development and Training Pty Ltd|
|51.||Kempston Driving Academy|
|52.||Khabanyane Training and development|
|53.||Khulani HR Consultancy (Pty) Ltd|
|54.||Kitta Transport Training Academy|
|55.||KZN Taxi and Commuter Corporation NPC|
|58.||Learning Exchange Pty Ltd|
|60.||Little Treehouse Holdings (PTY) Ltd|
|61.||Logistics Academy (Pty) Ltd|
|62.||LTM Training and Remote Learning Solutions|
|63.||Lwaze Lwanda General Traders CC|
|64.||Madibeng Edu Centre and Suppliers Pty Ltd|
|65.||Madidi Supply Chain Institute and Business Institute|
|67.||Maliwa Investment (Pty)Ltd|
|68.||Moripe Business and Training Consultants|
|69.||Mtimande & Associates|
|70.||Mziphela Training and Projects Pty. Ltd|
|71.||Ndwamato Training Solutions PTY LTD|
|72.||NOSA LOGISTICS PTY LTD|
|73.||Nowethu Learning Institute cc|
|75.||Ntalo Training & Consulting Services|
|76.||Ntsoaki Driving School|
|78.||Phephani Learnerships cc|
|79.||Precision skills development and training|
|80.||Primeserv Corporate Solutions Pty Ltd|
|81.||PUTCO Pty Ltd|
|82.||Quantum Leap College Pty Ltd|
|83.||Rasehlo Transport and Tourism|
|84.||Royal Impression Academy|
|85.||Safe and Eco Driving Pty Ltd|
|86.||Safety Skills Development Training|
|87.||SC Training and Consulting|
|88.||Sediba Sabasadi Skills Training Academy (Pty) Ltd|
|89.||Seng''khona Trading Enterprise 129 cc|
|90.||SHEPROSA PTY LTD|
|91.||SN Pool Transport|
|92.||Sophia''s Excellence Driving Academy|
|93.||South African Transport Centre of Excellence|
|94.||Southern Seas Institute CC|
|95.||SPINA Consultancy cc Cape Town|
|97.||TIESPRO (Pty) Ltd|
|98.||Training at Divine Group Pty Ltd|
|99.||Training Consultant and SD College|
|100.||Triton Express Pty Ltd|
|101.||Tshireletso Multi-skills and Training|
|103.||Vhonisani Training Academy & Projects|
|104.||Voltrek Trading and Projects|
|105.||WHSE Training College (Pty) Ltd|
|All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.|