SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Use of a hand machine carbine 
SAQA US ID UNIT STANDARD TITLE
10756  Use of a hand machine carbine 
ORIGINATOR
SGB Security 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 08 - Law, Military Science and Security Safety in Society 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  10 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2005-11-01  2008-11-01  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2009-11-01   2012-11-01  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
119650  Handle and use a self-loading rifle or carbine  Level 3  NQF Level 03  2   

PURPOSE OF THE UNIT STANDARD 
This unit standard is for relevant persons to competently carry, handle, shoot and maintain a hand machine carbine through the application of knowledge of the relevant legislation and skills in the safe and responsible handling of a hand machine carbine.

This unit standard includes the requirements to gain the appropriate licence for the possession and/or carrying of hand machine carbines both private and for business purposes.

Benefit for society of this unit standard is that the person who completes this will contribute to safety in society.
A person credited with this unit standard will be able to:
  • Understand the relevant legislation required for the lawful possession and use of a hand machine carbine
  • Handle a hand machine carbine safely
  • Operate, use and maintain a hand machine carbine
  • Shoot a hand machine carbine competently 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The following knowledge, skills, attitude and/or equivalent:
  • A knowledge, comprehension and application of language at NQF 03 
    		•

    UNIT STANDARD RANGE 
    This unit standard applies to persons competently carrying, handling, shooting and maintaining a hand machine carbine. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Apply knowledge and understanding of the relevant legislation required. 
    OUTCOME NOTES 
    Apply knowledge and understanding of the relevant legislation required for the lawful possession and use of a hand machine carbine. 
    OUTCOME RANGE 
    The types of relevant legislation should include:
  • Applicable sections of the Firearms Control Act 60/2000.
  • Applicable section of the Criminal Procedures Act, 1977.
  • Applicable section of the Regulation of Gatherings Act, 1993.
  • Applicable sections of the Dangerous Weapons Act.
  • Applicable sections of the SIRA Act 56/2001.
  • Applicable sections of specific Acts relevant to unique job/workplace environments
  • Private defence
  • Moral & humanitarian considerations (proportionality)
  • Continuum of force
  • Vicarious liability
  • Civil liability

    Hand machine carbine should include:
  • Semi automatic hand machine carbine 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. The application of knowledge and understanding on the possession of a hand machine carbine is demonstrated in accordance with relevant legislation. 

    ASSESSMENT CRITERION 2 
    2. The application of knowledge and understanding on the use of a hand machine carbine is demonstrated in accordance with relevant legislation. 

    ASSESSMENT CRITERION 3 
    3. The requirements for possession of a hand machine carbine is demonstrated in accordance with relevant legislation. 

    ASSESSMENT CRITERION 4 
    4. The requirements for the use of a hand machine carbine is demonstrated in accordance with relevant legislation. 

    ASSESSMENT CRITERION 5 
    5. Hand machine carbine and ammunition is kept according to operational procedures and legal requirements for safekeeping of firearms and ammunition. 

    SPECIFIC OUTCOME 2 
    Handle hand machine carbines safely. 
    OUTCOME RANGE 
    Standard safe handling procedures should include:
  • Safe handling rules & Safety procedures/drills.
  • Loading & unloading
  • Hand machine carbine retention

    Appropriate operational, specific tactical manner and in holsters should include:
  • Types of holsters.
  • Company policy/operational procedures
  • Hand machine carbine conditions of readiness
  • Hand machine carbine holster use
  • Hand machine carbine carry methods 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Demonstrate and apply knowledge of safe handling of hand machine carbines in accordance with standard safe handling procedures. 

    ASSESSMENT CRITERION 2 
    2. Safety of self and others ensured by handling and/or carrying hand machine carbines in appropriate operational, hand machine carbine specific tactical manner and in holsters/containers that comply with legal requirements. 

    ASSESSMENT CRITERION 3 
    3. Safety of self and others ensured through proper retention of hand machine carbine in accordance with standard safe handling procedures. 

    ASSESSMENT CRITERION 4 
    4. Ammunition carried is appropriate to hand machine carbine being handled and manufacturers specifications. 

    SPECIFIC OUTCOME 3 
    Operate, use and maintain hand machine carbines. 
    OUTCOME RANGE 
    Operated safely must include:

  • Range safety
  • Personal safety
  • Public safety

    Threat identification & analysis must include:
  • Conditions of readiness
  • Mental conditions
  • Mindset
  • Immediate surroundings
  • Alertness
  • Stress awareness
  • Pre-emption & pre-visualisation

    Manufacturers guidelines/operational procedures must include:
  • Specific hand machine carbine (manufacturers) operating manual
  • Names, parts & function of hand machine carbine
  • Basic internal, external and terminal ballistics
  • Components and functioning of hand machine carbine ammunition
  • Disassembling and assembling of hand machine carbine
  • Charge & emptying of magazine
  • Loading & unloading (range & operational)

    Maintenance must include:
  • Cleaning of hand machine carbine
  • Cleaning equipment
  • Care of hand machine carbine
  • Care of ammunition

    Visible faults must include:
  • Fail to feed
  • Fail to chamber
  • Fail to fire
  • Fail to extract
  • Fail to eject
  • Fail to cycle 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Hand machine carbines operated and used safely according to manufacturers guidelines, operational procedures and prevailing legislation. 

    ASSESSMENT CRITERION 2 
    2. Hand machine carbine used with specific attention to threat identification & analysis. 

    ASSESSMENT CRITERION 3 
    3. Safety of hand machine carbine and/or ammunition ensured by checking the hand machine carbine, ammunition and equipment on receipt and return to ensure they are in a safe and serviceable condition. 

    ASSESSMENT CRITERION 4 
    4. Demonstrate and apply maintenance procedures according to manufacturers specifications and safety procedures. 

    ASSESSMENT CRITERION 5 
    5. Visible faults identified and action taken according to operational procedures and prevailing legal requirements. 

    ASSESSMENT CRITERION 6 
    6. Hand machine carbine and ammunition received, kept and issued in a clean and serviceable condition. 

    ASSESSMENT CRITERION 7 
    7. Hand machine carbines and ammunition not in use transported & stored in a manner as required by prevailing legislation and employer requirements. 

    SPECIFIC OUTCOME 4 
    Shoot hand machine carbine competently. 
    OUTCOME RANGE 
    Malfunctions and immediate action drills must include:
  • Firearm misfires
  • Abuse
  • Mechanical malfunction
  • User malfunction
  • Clearing of malfunction (range & operational)

    Accurately must include:

  • Accurate up to a minimum of 25 meters distance using all stances and light conditions.

    Shooting range procedures must include:

  • Range rules & safety
  • Range commands
  • Safety equipment

    Hand machine carbine fired competently must include:
  • Shooting fundamentals
  • Fault analysis
  • Low light shooting
  • Cover (barricades) & concealment 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Hand machine carbine fired competently and accurately in accordance with current legal, operational and shooting range procedures. 

    ASSESSMENT CRITERION 2 
    2. Hand machine carbine fired competently and accurately during low light situations, in accordance with current legal, operational and shooting range procedures. 

    ASSESSMENT CRITERION 3 
    3. Hand machine carbine fired competently and accurately in accordance with current legal, operational and shooting range procedures whilst making use of a barricade/cover. 

    ASSESSMENT CRITERION 4 
    4. Malfunction and immediate action drills identified and corrected in accordance with standard safety procedures and in line with operational conditions. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    1. Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the POSLEC SETA ETQA/and any other body with whom a MOU was entered into.
    2. Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the POSLEC SETA ETQA by SAQA/and any other body with whom a MOU was entered into.
    3. The POSLEC SETA ETQA/and any other body with whom a MOU was entered into will oversee assessment and moderation of assessment according to the moderation guidelines in the relevant competency and the POSLEC SETA ETQA/and any other body with whom a MOU was entered into. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Refer to the Specific Outcomes and Assessment Criteria and the Range of variables contained in this unit standard and specifically to:
  • A comprehensive understanding of the relevant legislation, licensing requirements and procedures and practices.
  • A comprehensive understanding of discretion in the use of firearms
  • A comprehensive understanding of the operation & mechanics of hand machine carbines
  • A broad understanding of ammunition and ballistics
  • A broad understanding of shooting range procedures
  • A comprehensive understanding of Guidelines for the safe use and handling of hand machine carbines
  • A comprehensive understanding of Fundamentals of shooting a hand machine carbine 
    		•


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems related to the achievement of relevant legislative competencies. 

    UNIT STANDARD CCFO ORGANISING 
    Organise oneself and one's activities so that all requirements are met in achieving competence in lawfully possessing and using a hand machine carbine. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information related to the relevant legislation so that these are accurately interpreted into application performance standards. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Understand the world as a set of related systems in that legislative requirements are interrelated with the overall safe and lawful possession and use of a hand machine carbine. 

    UNIT STANDARD NOTES 
    SUPPLEMENTARY INFORMATION

    SPECIFIED REQUIREMENTS:

    Specified requirements include legal and legislative specific requirements and are:

    LEGAL
  • Applicable sections of the Firearms Control Act 60/2000.
  • Applicable section of the Criminal Procedures Act, 1977.
  • Applicable section of the Regulation of Gatherings Act, 1993.
  • Applicable sections of the Dangerous Weapons Act.
  • Applicable sections of the SIRA Act 56/2001.
  • Applicable sections of specific Acts relevant to unique job/workplace environments
  • Private defence
  • Moral & humanitarian considerations (proportionality)
  • Continuum of force
  • Constitution
  • Vicarious liability
  • Civil liability

    CONTEXT SPECIFIC
  • Training provider user manuals
  • Specifications, company operational agreements and policies and procedures

    Resources required for Assessment
  • Relevant shooting range.
  • Shooting exercise order.
  • Tools, equipment and materials for range set up.
  • Drill rounds
  • Relevant hand machine carbines, magazines and ammunition.
  • Holsters and magazine pouches.
  • Firearm cleaning equipment
  • Safety equipment and protective uniform/clothes
  • Communications equipment.
  • Necessary administrative and stationary issue.
  • First aid/fire fighting equipment.
  • Criterion referenced assessment instructions/tools.
  • Relevant shooting range standing orders.
  • A suitable venue: either in the workplace or classroom.


    SPECIAL NOTES WITH REFERENCE TO LEARNING HOURS REQUIRED WHEN LEARNING TOWARDS A COMBINATION OF UNIT STANDARDS:

    Should a learner attempt the unit standard: Use of a hand machine carbine in combination with the three other unit standards namely, use of a shotgun/handgun/rifle the total hours required by the learner to achieve the required outcomes of all four standards (in combination) would be: 190 hours. The rational for shortening the total learning hours by more than half is that similar knowledge and skills are present in some of the specific outcomes and assessment criteria.

    Such similarities is evident in outcomes such as the application of knowledge and understanding of the relevant legislation required for the lawful possession and use of a shotgun/handgun/hand machine carbine/rifle and in the assessment criteria: demonstrate and apply knowledge of safe handling of a shotgun/handgun/hand machine carbine/rifle in accordance with standard safe handling procedures of specific outcome: handle hand machine carbines safely.

    Finally, the learning hours required, combination should be as follows:

    Learning towards first unit standard: 100 notional training hours.
    Additional learning towards any one of the three remaining unit standards: 30 notional training hours.

    Example:

    First unit:
    Unit Standard No. 10756: Use of a hand machine carbine. 100 notional training hours.

    Combined with:
    Unit Standard No. 10754: Use of a shotgun. 30 notional training hours and/or;
    Unit Standard No. 10748: Use of a handgun. 30 notional training hours and/or;
    Unit Standard No. 10750: Use of a rifle. 30 notional training hours.

    When standards are attempted as a combination total notional training hours required for all four standards should be 190 notional training hours.

    This unit standard has been replaced by unit standard 119650, which is "Handle and use a self-loading rifle or carbine", Level 3, 2 credits. 
    		•

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  21854   Further Education and Training Certificate: Use of Firearms  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered"     		 2008-11-01  Was SAS SETA until Last Date for Achievement 
    Core  48879   National Diploma: South African Special Forces Operations  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered"     		 2010-04-07  Was SAS SETA until Last Date for Achievement 
    Elective  22490   National Certificate: General Security Practices  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2007-11-28  Was SAS SETA until Last Date for Achievement 
    Elective  50285   National Certificate: Professional Driving  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  TETA 
    Elective  13716   National Certificate: Professional Driving  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2006-06-29  TETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. ADT SECURITY SERVICES PTY LTD 
    2. Afri Guard(pty)ltd 
    3. AIM TRAINING ACADEMY 
    4. Algoa Bus Company 
    5. Andebe Group 
    6. BLACKEN SECURITY SERVICES 
    7. BTC TRAINING AFRICA PTY LTD 
    8. Buscor 
    9. Department Of Justice (head Office) 
    10. Dionysus Skills Development Initiative (Pty) Ltd 
    11. Diversity technology Training Institute 
    12. DWANDZANI PROJECTS CC 
    13. EKHURHULENI SHOOTING AND TRAINING ACADEMY 
    14. FALCON FIREARM ACADEMY 
    15. Fidelity Security Services 
    16. GEROTEK TEST FACILITIES 
    17. Hadassah Security Consultants Cc 
    18. He and She Driver Training Centre 
    19. HJN TRAINING CC 
    20. IMVULA SKILLS DEVELOPMENT ACADEMY 
    21. INGELOSI TRADING 192 CC 
    22. Inkqubela Consultants 
    23. Inkwe Sekuriteit Bk 
    24. INSIMBI SECURITY TRAINING CENTRE 
    25. ISASA SECURITY TRAINING CC 
    26. ITO FOCUS PHOLE 
    27. KWAZULU NATAL TRAFFIC TRAINING COLLEGE 
    28. Learncorp 
    29. MAGNUM SHOOTING ACADEMY 
    30. Makwedeng Training 
    31. MEC TRAINING (PTY) LTD 
    32. NORTHERN PROVINCE TRAINING ACADEMY 
    33. NOSA LOGISTICS PTY LTD 
    34. NTATE AVIATION AND SECURITY TRAINING 
    35. NU LAW FIREARMS COMPLIANCE 
    36. Pal Passenger Bus Services 
    37. Phephani Learnerships cc 
    38. PPLE Group Pty Ltd 
    39. PUTCO Limited 
    40. PUTCO Pty Ltd 
    41. RAMAZWI SECURITY SERVICES CC 
    42. RONIN PROTECTION SERVICES 
    43. Safe and Eco Driving Pty Ltd 
    44. SBV SERVICES CAPE TOWN 
    45. SBV SERVICES MIDRAND 
    46. SILVER SOLUTIONS SECURITY 1713 CC 
    47. Sobabini Group Pty Ltd 
    48. SOUTH AFRICAN POLICE SERVICE ACADEMY CHATSWORTH 
    49. SOUTH AFRICAN RESERVE BANK 
    50. SPINA Consultancy cc Cape Town 
    51. Staff Management Services 
    52. TINTSWALO SECURITY SERVICES 
    53. TZANEEN TRAINING CENTRE LIMPOPO 
    54. UBUNTU 
    55. ZEVOLI 9 PTY LTD 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.