SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED QUALIFICATION THAT HAS PASSED THE END DATE: 

National Certificate: Construction Material Manufacturing 
SAQA QUAL ID QUALIFICATION TITLE
24196  National Certificate: Construction Material Manufacturing 
ORIGINATOR
SGB Building Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY NQF SUB-FRAMEWORK
CETA - Construction Education and Training Authority  OQSF - Occupational Qualifications Sub-framework 
QUALIFICATION TYPE FIELD SUBFIELD
National Certificate  Field 12 - Physical Planning and Construction  Building Construction 
ABET BAND MINIMUM CREDITS PRE-2009 NQF LEVEL NQF LEVEL QUAL CLASS
Undefined  120  Level 3  NQF Level 03  Regular-Unit Stds Based 
REGISTRATION STATUS SAQA DECISION NUMBER REGISTRATION START DATE REGISTRATION END DATE
Passed the End Date -
Status was "Reregistered" 
SAQA 9999/99  2018-07-01  2023-06-30 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2026-06-30   2029-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This qualification does not replace any other qualification and is not replaced by any other qualification. 

PURPOSE AND RATIONALE OF THE QUALIFICATION 
This qualification will allow a person to advance to learning in a variety of manufacturing equivalent types of qualifications and manufacturing management at NQF 4. This qualification will contribute to the full development of the learner within the construction materials manufacturing fraternity by providing recognition, further mobility and transportability within manufacturing fields.
The skills, knowledge and understanding demonstrated within this qualification are essential for social and economic transformation and contribute to the progression and economic growth within the manufacturing fraternity.

A person acquiring this qualification will be able to adjust and maintain production processes, perform first line maintenance procedures and manufacture a construction material product within a specialty area such as clay/ refractory brick, ceramic, concrete, bitumen and wood joinery products, whilst adhering to safety, risk, quality and environmental requirements and specifications under supervision.

Rationale of the qualification

This qualification reflects the workplace-based need of employers and employees within the construction and construction material manufacturing disciplines being clay/refractory brick, ceramic, concrete, bitumen and wood joinery disciplines, both now and for the future.

The long history of construction material manufacturing that adds value to the construction and manufacturing domains, seeks for formal recognition and acknowledgement of these individuals resulting in a formal career development and portability within the manufacturing contexts.

Typical learners are individuals with basic manufacturing competencies such as operation of manufacturing equipment, interpretation of engineering drawings and fundamental manufacturing operator skills.

A qualifying learner would be able to operate as a valuable team member or leader within the construction material manufacturing processes, specialising in construction material specialty areas such as clay/refractory brick, ceramic, concrete, bitumen and wood joinery materials. This will provide valuable training, embedded knowledge and fundamental experience towards a career within manufacturing processes, especially construction material manufacturing that will be beneficial to an individual and also to the economy/ industry.

This qualification provides the learner with accessibility to be employed within the construction material manufacturing industry and will be providing portability and articulation possibilities within a variety of manufacturing contexts. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
  • A knowledge, comprehension and application of language, mathematics, natural science and technology on NQF 2.
  • A National Certificate in Construction Material Manufacturing NQF 2 will be an advantage.

    Recognition of prior learning

    This qualification may be achieved in part or completely through the recognition of prior learning, which includes formal, informal and non-formal learning and work experience. A learner wishing to be assessed towards this qualification may arrange to do so without attending any further training or education. The assessor and the learner will jointly decide on the most appropriate method to be taken. 

  • RECOGNISE PREVIOUS LEARNING? 

    QUALIFICATION RULES 
    Elective unit standards - choose a minimum of 20 credits 

    EXIT LEVEL OUTCOMES 
    The outcomes are specified in terms of specific and critical cross-field outcomes.

    Exit level 1:
    Explain, interpret and use knowledge in performing tasks related to construction manufactured products and processes.
    Exit level 2:
    Collect, analyse, organise and critically evaluate information by interpreting engineering drawings.
    Exit level 3:
    Use science and technology required adjusting and maintaining of the specialised production process.
    Exit level 4:
    Maintain safety, health, environmental and good manufacturing practices in a manufacturing environment, as a team member to sustain economic development of the society at large.
    Exit level 5:
    Compare and interpret available information to solve problems in the construction manufacturing process. 

    ASSOCIATED ASSESSMENT CRITERIA 
    The assessment criteria of the qualification are embodied in the unit standards. The knowledge, skills and understanding will be assessed across several specialised contexts and are cleared defined within the relevant specific outcomes, assessment criteria and range statements within these unit standards.

    Integrated Assessment

    The applied competence (practical, foundational and reflexive competencies) of this qualification will be achieved if a candidate is able to achieve all the exit level outcomes of this qualification.

    Identifying and solving of problems, working in a team, organising one-self, using applied science and implication of actions and reactions in the world as a set of related systems must be assessed during any combination of practical, foundational and reflexive competencies assessment methods and tools to determine the whole person development and integration of applied knowledge and skills.

    Applicable assessment tool(s) to establish the foundational, reflective and embedded knowledge to problem solving and application of the world as a set of related systems within the manufacturing and maintenance field.
    A detailed portfolio of evidence is required to prove practical, applied and foundational competencies of the learner.
    Assessors and moderators should develop and conduct their own integrated assessment by making use of a range of formative and summative assessment methods. Assessors should assess and give credit for the evidence of learning that has already been acquired through formal, informal and non-formal learning and work experience.
    Unit standards in the qualification must be used to assess specific and critical cross-field outcomes. During integrated assessments the assessor should make use of formative and summative assessment methods and should assess combinations of practical, applied, foundational and reflective competencies. 

    INTERNATIONAL COMPARABILITY 
    Benchmarking was done against international standards and qualifications from the NVQ from Britain, New Zealand Qualification Authority, the American Qualification Curriculum and Assessment Authority Frameworks and the US Manufacturing Skills Standards.

    A vast range of manufacturing qualifications with a variety of specialization areas could be found such as National Certificates in Manufacturing Levels 2-4 and National Certificate in Joinery Manufacturing level 3.
    The level, qualification outcomes, notional learning time and degree of difficulty do compare favourably. Although some manufacturing areas with related qualifications tend to be more specialised or focused, a strong trend was found towards broad focus areas within a speciality such as construction. 

    ARTICULATION OPTIONS 
    This qualification will allow a person to advance to learning for manufacturing management qualification at NQF level 4 or a similar qualification at this level. The qualification provides the learner with flexibility to pursue different careers in construction material manufacturing industry and articulation within a variety of other manufacturing industries. The level of flexibility with the range of electives will allow the individual to pursue further learning within the manufacturing industry. 

    MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this Qualification must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this Qualification must be accredited as a provider with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQAs policies and guidelines for assessment and moderation; in terms of agreements reached around assessment and moderation between ETQAs (including professional bodies); and in terms of the moderation guideline detailed immediately below.
  • Moderation should also encompass achievement of the competence described both in individual unit standards, exit level outcomes as well as the integrated competence described in the qualification.

    Anyone wishing to be assessed against this Qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • CRITERIA FOR THE REGISTRATION OF ASSESSORS 
    For an applicant to register as an assessor, the applicant needs:
    Interpersonal skills, subject matter expertise and assessment experience.
    The assessor needs to be competent in the planning and conducting assessment of learning outcomes as described in the unit standards Plan and conduct assessment of learning outcomes NQF level 5. The subject matter experience must be well developed within the field of construction material manufacturing, maintenance and quality assurance practices.
    The assessor must have completed:
  • A similar qualification or from the same family of qualifications, at or above NQF 4, or
  • National Certificate in Construction Material Manufacturing NQF 4.

    The subject matter experience of the assessor can be established by recognition of prior learning.
    Assessors need to be registered with the relevant Education and Training Quality Assurance Body. 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this qualification was Reregistered in 2012; 2015. 

    NOTES 
    N/A 

    UNIT STANDARDS: 
      ID UNIT STANDARD TITLE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
    Core  9922  Adjust and maintain production process  Level 3  NQF Level 03  30 
    Core  9914  Handle and care for materials  Level 3  NQF Level 03  12 
    Core  8016  Maintaining occupational health, safety and general housekeeping  Level 3  NQF Level 03 
    Core  9913  Perform first line maintenance  Level 3  NQF Level 03  14 
    Fundamental  8968  Accommodate audience and context needs in oral communication  Level 3  NQF Level 03 
    Fundamental  9010  Demonstrate an understanding of the use of different number bases and measurement units and an awareness of error in the context of relevant calculations  Level 3  NQF Level 03 
    Fundamental  9013  Describe, apply, analyse and calculate shape and motion in 2-and 3-dimensional space in different contexts  Level 3  NQF Level 03 
    Fundamental  8969  Interpret and use information from texts  Level 3  NQF Level 03 
    Fundamental  9012  Investigate life and work related problems using data and probabilities  Level 3  NQF Level 03 
    Fundamental  8973  Use language and communication in occupational learning programmes  Level 3  NQF Level 03 
    Fundamental  7456  Use mathematics to investigate and monitor the financial aspects of personal, business and national issues  Level 3  NQF Level 03 
    Fundamental  8970  Write texts for a range of communicative contexts  Level 3  NQF Level 03 
    Elective  9122  Demonstrate knowledge of introductory principles of chemistry and physics  Level 2  NQF Level 02 
    Elective  9599  Lift and move material and equipment by means of a forklift  Level 2  NQF Level 02 
    Elective  7547  Operate a personal computer system  Level 2  NQF Level 02 
    Elective  9883  Adjust and maintain production machinery  Level 3  NQF Level 03  30 
    Elective  9887  Coat material and components  Level 3  NQF Level 03 
    Elective  14614  Manufacture bitumen emulsion products  Level 3  NQF Level 03  10 
    Elective  14628  Manufacture ceramic products  Level 3  NQF Level 03  10 
    Elective  14599  Manufacture clay/refractory brick products  Level 3  NQF Level 03  20 
    Elective  14625  Manufacture concrete products  Level 3  NQF Level 03  10 
    Elective  14592  Manufacture hot mix asphalt products  Level 3  NQF Level 03  10 
    Elective  14617  Manufacture wood joinery products  Level 3  NQF Level 03  10 
    Elective  8039  Operating cranes  Level 3  NQF Level 03  10 
    Elective  9885  Read and interpret engineering drawings  Level 3  NQF Level 03  12 


    LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION: 
     
    NONE 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Big Tree Group 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.