SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Perform minor process maintenance on metallurgical process equipment 
SAQA US ID UNIT STANDARD TITLE
256657  Perform minor process maintenance on metallurgical process equipment 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  10 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to people who are responsible for performing minor process maintenance on process equipment in a metallurgical plant.

People credited with this unit standard are able to:
  • Demonstrate knowledge relating to process equipment maintenance.
  • Prepare to maintain process equipment.
  • Maintain process equipment.
  • Complete the duties pertaining to process equipment maintenance. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are already competent in the following:
  • Communication and Mathematical literacy at NQF Level 2. 

  • UNIT STANDARD RANGE 
    The following range will apply to this unit standard:

    The learner will be required to perform minor maintenance on one or more of the following process equipment units:
  • Interstage screens.
  • Electro-winning cathodes.
  • Stellar candles.
  • Merrill filter bags. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge relating to process equipment maintenance. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The importance of maintaining process equipment is explained in terms of achieving specified production requirements. 

    ASSESSMENT CRITERION 2 
    The principal components and the interlock systems of the process equipment are identified and their functions explained in terms of operational requirements. 

    ASSESSMENT CRITERION 3 
    The requirements pertaining to a safe, healthy work environment during process equipment maintenance, and the consequences of not adhering to the above are explained in terms of specified requirements. 

    ASSESSMENT CRITERION 4 
    Hazards and associated risks pertaining to process equipment maintenance are identified through relevant risk assessment procedures. 

    ASSESSMENT CRITERION 5 
    The actions to be taken should hazards and risks be encountered are explained in terms of specified requirements. 

    ASSESSMENT CRITERION 6 
    Lock-out procedures pertaining to process equipment maintenance and the consequences of non-compliance are explained in terms of operational requirements. 

    ASSESSMENT CRITERION 7 
    The actions to be taken, should sub-standard conditions and problems be encountered, are explained in terms of operational requirements. 

    ASSESSMENT CRITERION 8 
    The communication requirements pertaining to process equipment maintenance and the consequences of non-compliance are explained in terms of operational requirements. 

    SPECIFIC OUTCOME 2 
    Prepare to maintain process equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Task-specific personal protective and safety equipment is verified, examined and used in accordance with prescribed practices. 

    ASSESSMENT CRITERION 2 
    Assessment of process maintenance requirements and the preparation for the maintenance are in accordance with standard plant task procedures. 

    ASSESSMENT CRITERION 3 
    Lock-out procedures are adhered to in accordance with specified requirements. 

    ASSESSMENT CRITERION 4 
    Task-specific tools and equipment are verified and examined in accordance with prescribed practices. 

    ASSESSMENT CRITERION 5 
    Workplace hazards and associated risks are dealt with in accordance with recommendations set out in the risk assessment procedures. 

    ASSESSMENT CRITERION 6 
    Security requirements pertaining to process equipment maintenance are explained and met in accordance with operational requirements. 

    ASSESSMENT CRITERION 7 
    Occupational safety and health precautions towards self and others are maintained in accordance with specified requirements. 

    SPECIFIC OUTCOME 3 
    Maintain process equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Task-specific personal protective and safety equipment is used in accordance with prescribed practices. 

    ASSESSMENT CRITERION 2 
    Task-specific tools and equipment are used in accordance with prescribed practices. 

    ASSESSMENT CRITERION 3 
    Maintenance on selected process equipment is conducted in accordance with plant requirements. 

    ASSESSMENT CRITERION 4 
    Lock-out procedures are adhered to in accordance with specified requirements. 

    ASSESSMENT CRITERION 5 
    Work related hazards and associated risks are dealt with in accordance with recommendations set out in the risk assessment procedures. 

    ASSESSMENT CRITERION 6 
    Problems encountered are dealt with in accordance with prescribed practices. 

    ASSESSMENT CRITERION 7 
    Security requirements pertaining to process equipment maintenance are met in accordance with operational requirements. 

    ASSESSMENT CRITERION 8 
    Communication requirements are adhered to in accordance with operational requirements. 

    ASSESSMENT CRITERION 9 
    Occupational safety and health precautions towards self and others are maintained in accordance with plant instructions. 

    SPECIFIC OUTCOME 4 
    Complete the duties pertaining to process equipment maintenance. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Task-specific personal protective and safety equipment is dealt with in accordance with prescribed practices. 

    ASSESSMENT CRITERION 2 
    Task-specific tools, equipment and redundant material are dealt with in accordance with prescribed practices. 

    ASSESSMENT CRITERION 3 
    Good housekeeping practices are maintained in accordance with prescribed practices. 

    ASSESSMENT CRITERION 4 
    Reporting and data-recording requirements are met in accordance with operational requirements. 

    ASSESSMENT CRITERION 5 
    Security requirements pertaining to process equipment maintenance are met in accordance with legal and site-specific requirements. 

    ASSESSMENT CRITERION 6 
    Lock-out procedures pertaining to process equipment maintenance are adhered to in accordance with specified requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and. moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and. guidelines for assessment and. moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise.
  • Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge will be assessed in an integrated way in the context of the unit standard.

    Knowledge relating to performing minor maintenance on metallurgical process equipment:
  • Purpose and importance.
  • Plant, equipment, tools and machinery used.
  • Principal components of plant and equipment.

    Critical factors relating to performing minor maintenance on metallurgical process equipment:
  • Legal and specified requirements.
  • Achieving specified production requirements.
  • Risk Assessment procedures and actions.
  • Identify the principal components and explain the specification and their functions.
  • Specified communication requirements.
  • Elementary principles of the process.

    Processes and events relating to performing minor maintenance on metallurgical process equipment:
  • Principles of the process.
  • Preparation.
  • Monitor and control.
  • Operating parameters and control methods.
  • Factors affecting optimum performance.

    Causes and effects (Safety and Health):
  • Use of personal protective equipment.
  • Use of tools and equipment.
  • Workplace hazards and associated risks.
  • Housekeeping.

    Procedures and techniques relating to performing minor maintenance on metallurgical process equipment:
  • Methods of collecting, analysing, organising, summarising and presenting data.
  • Fault finding and corrective techniques.
  • Handling procedure and controls.

    Regulations, legislation, agreements, policies and standards:
  • Safety, health and environmental legislation and regulations.
  • Quality policies, standards and agreements. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking.

    Note:
  • The learner is able to monitor plant and process conditions, identify anomalies and non-conformances and take appropriate action to resolve the issue with regards to performing minor maintenance on metallurgical process equipment. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organisation or community.

    Note:
  • The learner contributes effectively to teamwork in the mineral processing plant by contributing to team output and adhering to relevant codes of conduct. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.

    Note:
  • The learner demonstrates the ability to constantly monitor plant and process conditions, record information accurately and interpret plant and process information effectively. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically, thus showing responsibility towards the environment and health of others.

    Note:
  • The learner interacts confidently with the technology which is used to monitor and control conditions in the minerals processing plant and related systems. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.

    Note:
  • The learner understands the synergy between upstream, downstream and parallel processes, and his/her own role with regards to performing minor maintenance on metallurgical process equipment. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Terminology:

    Specified requirements include legal and site specific requirements are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health and Safety Act, 1996 (Act no 29/1996), and Minerals Act and Regulations, 1991 (Act no 50/1991).
  • Mandatory Codes of Practice.
  • SANS and other Standards.
  • Chief Inspector of Mines' Directives.

    Site-Specific:
  • Hazard Identification and Risk Assessments (HIRA).
  • Occupational Health and Safety Risk Management Programme.
  • Managerial Instructions.
  • Mine Standard Procedures.
  • List of Recorded OH and S Risks.
  • Working Guides.
  • Equipment and Materials Specifications. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  62769   National Certificate: Mineral Processing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.