SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Demonstrate an understanding of the workshop set-up for handmade jewellery 
SAQA US ID UNIT STANDARD TITLE
119971  Demonstrate an understanding of the workshop set-up for handmade jewellery 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 1  NQF Level 01  2 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is intended for a person who wishes to demonstrate an understanding of the workshop set-up.

A person credited with this can:
  • Identify and describe a workbench and forming area.
  • Identify and describe the melting and pickling area.
  • Polishing and cleaning area. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The following learning or equivalent:
  • ABET level 3 
    		•

    UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Identify and describe a workbench and forming area. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    A jeweller's workbench is identified and described in terms of current industry standards. 

    ASSESSMENT CRITERION 2 
    The forming area within the workshop is identified and described in terms of current industry standards. 

    ASSESSMENT CRITERION 3 
    The consequences of not adhering to the correct use of the jewellers work bench and forming tools are described in terms of the potential impact on health & safety and productivity. 

    SPECIFIC OUTCOME 2 
    Identify and describe the melting and pickling area. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The melting are in the workshop is identified and its function described in terms of current industry standards. 

    ASSESSMENT CRITERION 2 
    The pickling are in the workshop is identified and its function described in terms of current industry standards. 

    ASSESSMENT CRITERION 3 
    The consequences of not adhering to the correct use of the melting and pickling area are described in terms of the potential impact on health & safety and productivity. 

    SPECIFIC OUTCOME 3 
    Polishing and cleaning area 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The polishing area in the workshop is identified and its function described in terms of current industry standards. 

    ASSESSMENT CRITERION 2 
    The cleaning area in the workshop is identified and its function described in terms of current industry standards. 

    ASSESSMENT CRITERION 3 
    The consequences of not adhering to the correct use of the polishing and cleaning area are described in terms of the potential impact on health & safety and productivity. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA by SAQA.
  • Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines in the relevant qualification and the agreed ETQA procedures. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The embedded knowledge is covered in Specific Outcomes and the relevant Assessment Criteria. 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems in which responses display that responsible decisions using critical and creative thinking have been made. 

    UNIT STANDARD CCFO WORKING 
    Working effectively with others as a member of a team, group, organization, community. 

    UNIT STANDARD CCFO ORGANISING 
    Organizing and managing oneself and ones activities responsibly and effectively. 

    UNIT STANDARD CCFO COLLECTING 
    Collecting analysing, organizing and critically evaluation information. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicating effectively using visual, mathematical and/or language skills in the modes of oral and/or written persuasion. 

    UNIT STANDARD CCFO SCIENCE 
    Using science and technology effectively and critically, showing responsibility towards the environment and health of others. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognizing the problem-solving context do not exist in isolation. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Terminology:
  • Non-Ferrous metal refers to all non precious metals that do not contain iron.
  • Precious metal refers to silver, gold and platinum.
  • Pierce refers to removing metal with a jewellers saw frame.
  • Draw refers to elongating and compressing a metal rod by pulling it through a draw plate.
  • Drawplate refers to a steel plate with graded tapering holes used to draw wire.

    Specified requirements:

    Specified requirements include legal and workplace specific requirements and are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health & Safety Act, 1996 (Act no 29/1996), and Minerals Act and Regulations, 1991 (Act no 50/1991)
  • Regulations
  • Mandatory Codes of Practice
  • SABS and other Standards

    Site specific:
  • Hazard Identification and Risk Assessments (HIRA)
  • Occupational Health and Safety Risk Management Programme
  • Voluntary Codes of Practice
  • Managerial Instructions
  • List of Recorded OH&S Risks
  • Working Guides
  • User manuals supplied by equipment manufacturer
  • The Bargaining Council for the Jewellery and Precious Metals Industry Main agreement
  • The employer's work specifications, tariff agreements and policies and procedures
  • Regulations as per directives from the Gold and Diamond Branch of the South African Police
  • The Occupational Health and Safety Act, No 29 of 1996
  • ISO 9000/1, SABS and other accredited standards and quality assurance measures
  • A glossary of terms regarding the terminology of the Jewellery Industry

    Unit standard justification:

    Level:
  • Attribute: Skills; Level 1; Justification: Limited in range
  • Attribute: Procedures; Level 1; Justification: Repetitive and familiar
  • Attribute: Context; Level 1; Justification: Closely defined
  • Attribute: Knowledge; Level 2; Justification: Basic operational
  • Attribute: Information processing; Level 2; Justification: Basic process of readily available information
  • Attribute: Problem Solving; Level 2; Justification: Known solutions to familiar problems
  • Attribute: Orientation of activities; Level 1; Justification: Directed
  • Attribute: Application of responsibility; Level 1; Justification: Under close supervision
  • Attribute: Orientation of scope of responsibility; Level 1; Justification: No responsibility for the work or learning of others
  • Average Level: 12/9 = 1.3
  • Actual Level: 1
  • Assigned: 1

    Credits

    Total hours required by the learner to achieve the required outcome:
  • Activity: Classroom Teaching - 18 hours
  • Activity: On-The-Job Training
  • Activity: Other (Specify)
    Total: 18 hours

    Credits Achieved: 18/10 = 1.8
    Credits Assigned = 2 
    		•

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  58267   General Education and Training Certificate: Mining and Minerals Processes  Level 1  NQF Level 01  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. ADCORP TECHNICAL TRAINING (PTY) LTD 
    2. ALLOYS HEAD OFFICE 
    3. ASSMANG (PTY) LTD 
    4. ASSMANG BEESHOEK MINE 
    5. BAFOKENG RASIMONE MANAGEMENT SERVICES PTY LTD 
    6. BANA BA THARI MINING TRANING AND DEVELOPMENT ACADEMY 
    7. BARBERTON MINES (PTY) LTD 
    8. ERGO BUSINESS DEVELOPMENT ACADEMY NPC 
    9. EXXARO COAL (PTY) LTD 
    10. FINSCH DIAMOND MINE(PTY) LTD 
    11. FOSKOR (PTY) LTD 
    12. GLENCORE OPERATIONS SOUTH AFRICA PTY LTD 
    13. HARMONY GOLD MINING CO LTD 
    14. IMPALA PLATINUM SERVICES LTD 
    15. KUMBA IRON ORE (SISHEN) 
    16. Kumba Sishen HRD Centre 
    17. LYNAZY RESOURCES 
    18. MARULA PLATINUM PTY LTD 
    19. MATHOME TRAINING AND DEVELOPMENT (PTY) LTD 
    20. MODIKWA MINING PERSONNEL SERVICES PTY L TD 
    21. MURRAY & ROBERTS CEMENTATION (PTY)LTD 
    22. NORTHAM PLATINUM LTD 
    23. PALABORA COPPER (PTY) LTD 
    24. PPC Ltd 
    25. PROGRESSIVE TRAINING DEVELOPMENT AND PROJECTS (PTY) LTD 
    26. RICHARDS BAY MINING PTY LTD 
    27. SIBANYE GOLD ACADEMY PROPRIETARY LIMITED 
    28. SIBANYE RUSTENBURG PLATINUM MINES PTY LTD 
    29. THUNGELA OPERATIONS (PTY) LTD 
    30. TWO RIVERS PLATINUM (PTY) LTD 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.