SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Operate a pendant controlled overhead crane 
SAQA US ID UNIT STANDARD TITLE
116235  Operate a pendant controlled overhead crane 
ORIGINATOR
SGB Civil Engineering Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Civil Engineering Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The qualifying learner is capable of:

Demonstrating an integrated practical and theoretical grounding in Crane Operations according to safe handling and maintenance practices in compliance with crane manufacturer's and legislated standards.

The contribution to The National Skills Development Strategy is the key developmental interface between learners and new competencies to be achieved.

Learners who master the applied competence described in this unit standard will contribute to the development of a professional community of Civil Engineering Construction Crane Operators who are able to competently use science and technology when applying operation techniques
The contribution to socio-economic transformation is that learners will be able to undergo RPL-assessment and thereby receive recognition for previous learning and experience. This in turn will enhance the employability and career prospects of learners employed in this sector 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
The following knowledge, skills attitude and/or equivalent:
Learning assumed to be in place
NQF Level 1 Numeracy and NQF Level 1 Literacy

The operator should be declared physically fit and have completed an eyesight test (such as the Orthorator test, the Purdue University Test No. 3, etc.) and an industry recognised depth perception and hand-eye co-ordination test.

It is assumed that people starting to learn towards this unit standard have already undergone company induction, have an appropriate licence to operate in the work area, and are competent in unit standards which address:
  • Relevant Code of practice
  • Occupational Health, Safety and General Housekeeping
  • Mechanical Awareness and Plant Appreciation 

  • UNIT STANDARD RANGE 
    Limited to work carried out on a standard crane, or with standardised fittings

    Major components may include but is not limited to: brakes, ropes, sheaves, load equalisers, load indictors, limit warning devices, slings, spreaders, hooks, bins, tongs, grabs, magnets.

    Lifting equipment may include but is not limited to
    wire slings, chains, magnets, nylon straps, lifting beams, spreader bars

    Factors influencing safety and suitability of a crane:

    Hazards may include but is not limited to - access, obstructions, field of vision, communications, travel route, unauthorised people, insecure loads, unstable loads, unknown loads, nature of loads.

    Statutory requirements include but are not limited to:
  • Relevant Code of practice
  • Safety, Health & Environmental legislation

    Local Provincial authority requirements Appropriate checklist is any one or a combination of the following:
  • Manufacturer's checklist
  • Pre-operational checklist
  • Site-specific checklist
  • Daily checklist
  • Weekly checklist
  • Site-specific checklist

    Inspecting and recording the operational fitness of all components of the crane should cover:
  • Structural Components
  • Mechanical & Electrical Systems
  • Controls & levers
  • Mast Sections
  • Chassis & Ballast

    Within convenient reach of load, sound solid ground - wheels, outriggers; blocking, pads, clear slewing area with load, work area cordoned off

    Worksite procedures include manufacturer's procedures, operators manuals and site operational requirements, or similar procedures
  • Corrective action includes inspections and/or reporting
  • Controls include levers, switches, joy sticks and pedals where applicable
  • Forwards, reverse, left, right, gear selection, braking
  • All implement and attachment movements
  • Corrective action includes repairing and/or reporting 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of the functions of a pendant controlled overhead crane. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The main functions of Pendant Controlled Overhead Crane's are explained in terms of manufacturer's specifications. 

    ASSESSMENT CRITERION 2 
    The operation of all major components is explained in terms of their functions. 

    ASSESSMENT CRITERION 3 
    All safety features and warning devices on the crane are identified, and their purposes explained in accordance with manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    The maximum operating capacities are explained in terms of the designed crane capabilities. 

    ASSESSMENT CRITERION 5 
    Warnings from crane indicators and gauges are explained according to manufacturer's specifications. 

    ASSESSMENT CRITERION 6 
    Corrective actions are described or demonstrated in terms of neutralising warnings received. 

    SPECIFIC OUTCOME 2 
    Identify the safety and suitability of the crane. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Demonstrate the ability to identify the suitability of the crane prior to utilisation 

    ASSESSMENT CRITERION 2 
    Demonstrate ability to assess operational capability of lifting equipment (e.g. correct SWL of slings etc). 

    ASSESSMENT CRITERION 3 
    Demonstrate an understanding of the influence of load/range characteristics, manufacturers' requirements and environmental conditions. 

    ASSESSMENT CRITERION 4 
    Demonstrate an understanding of what constitutes safety in the broader working environment, and when operating a Pendant Controlled Overhead crane in compliance with statutory regulations. 

    SPECIFIC OUTCOME 3 
    Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Pre-operational checks are carried out according to appropriate checklist. 

    ASSESSMENT CRITERION 2 
    Daily and weekly operator maintenance is performed according to the appropriate post-operational checklist and recordkeeping using a logbook 

    ASSESSMENT CRITERION 3 
    Checklist is completed according to worksite procedures and corrective action taken if required, ensuring compliance with manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    Appropriate measures used to rectify and/or prevent basic faults and defects in the mechanical function of the crane are identified. 

    SPECIFIC OUTCOME 4 
    Operate a pendant controlled overhead crane. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The purpose of the various controls is explained in accordance with their designed use. 

    ASSESSMENT CRITERION 2 
    Functions of the various controls are demonstrated in accordance with the manufacturer's specifications. 

    ASSESSMENT CRITERION 3 
    Controls are used to effectively manoeuvre the crane within manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    Safe working procedures are followed according to manufacturer's specifications, site specific and statutory requirements. 

    ASSESSMENT CRITERION 5 
    Crane performance is monitored and corrective action is taken when necessary, in accordance with manufacturer's manual. 

    ASSESSMENT CRITERION 6 
    Crane is operated without risk of damage or loss to Crane or property, or injury to people. 

    ASSESSMENT CRITERION 7 
    Hazards specific to operating a Pendant Controlled Overhead Crane and ways to minimise these are explained in terms of potential damage to Crane and property, and injury to people. 

    ASSESSMENT CRITERION 8 
    Start-up and shutdown procedures are followed according to manufacturer's manual 

    ASSESSMENT CRITERION 9 
    Crane is parked according to manufacturer's and company / site requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the CETA-ETQA
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the CETA-ETQA
  • CETA-ETQA or other ETQA's who have a Memorandum of Understanding in place with CETA-ETQA would be responsible for moderation of learner achievements of learners who meet the requirements of this qualification. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • The Cab Controlled Overhead Crane's operating procedures and main functions of all major components and systems
  • The maximum operating capacities of the designed working capabilities.
  • Statutory requirements including the Relevant Code of practice and Safety, Health & Environmental legislation
  • Recognized hand signals (and other methods of communication) to direct the crane movements.
  • Selection of crane against environmental restraints 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems

    Evident in the following specific outcomes and assessment criteria:

    Demonstrate Knowledge of the Functions of a Pendant Controlled Overhead Crane
  • Corrective actions are described or demonstrated in terms of neutralising warnings received 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others

    Evident in the following specific outcomes and assessment criteria:

    Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane
  • Checklist is completed according to worksite procedures and corrective action taken if required, ensuring compliance with manufacturer's specifications 

  • UNIT STANDARD CCFO ORGANISING 
    Employ self management

    Evident in the following specific outcomes and assessment criteria:

    Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane
  • Daily and weekly operator maintenance is performed according to the appropriate post-operational checklist and recordkeeping using a logbook 

  • UNIT STANDARD CCFO COLLECTING 
    Manage information

    Evident in the following specific outcomes and assessment criteria:

    Demonstrate Knowledge of the Functions of a Pendant Controlled Overhead Crane
  • Warnings from crane indicators and gauges are explained according to manufacturer's specifications 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively

    Evident in the following specific outcomes and assessment criteria:

    Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane
  • Appropriate measures used to rectify and/or prevent basic faults and defects in the mechanical function of the crane are identified 

  • UNIT STANDARD CCFO SCIENCE 
    Demonstrate scientific and technological competence

    Evident in the following specific outcomes and assessment criteria:

    Identify the safety and suitability of the crane.
  • Demonstrate ability to assess operational capability of lifting equipment (e.g. correct SWL of slings etc).
  • Demonstrate an understanding of what constitutes safety in the broader working environment, and when operating a Pendant Controlled Overhead Crane in compliance with statutory regulations. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Understand contextual world-systems
    2
    Identify the safety and suitability of the crane.
    2.4
    Demonstrate an understanding of what constitutes safety in the broader working environment, and when operating a Pendant Controlled Overhead Crane in compliance with statutory regulations.

    4
    Operate a Pendant Controlled Overhead Crane
    4.7
    Hazards specific to operating Pendant Controlled Overhead Crane's and ways to minimise these are explained in terms of potential damage to machine and property, and injury to people. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  66029   General Education and Training Certificate: Chemical Operations  Level 1  NQF Level 01  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  78523   National Certificate: Automotive Repair and Maintenance  Level 2  NQF Level 02  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  78944   National Certificate: Autotronics  Level 2  NQF Level 02  Reregistered  2023-06-30  MERSETA 
    Elective  58955   National Certificate: Chemical Manufacturing  Level 2  NQF Level 02  Reregistered  2023-06-30  CHIETA 
    Elective  48961   National Certificate: Construction: Crane Operations  Level 2  NQF Level 02  Reregistered  2023-06-30  CETA 
    Elective  58722   National Certificate: Engineering Fabrication  Level 2  NQF Level 02  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  59729   National Certificate: Mechanical Handling (Rigging)  Level 2  NQF Level 02  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  61929   National Certificate: Pulp and Paper Operations  Level 2  NQF Level 02  Reregistered  2023-06-30  FPMSETA 
    Elective  59017   National Certificate: Tissue Conversion  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2015-06-30  FPMSETA 
    Elective  57881   National Certificate: Welding Application and Practice  Level 2  NQF Level 02  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  48794   National Certificate in Quality Checking of Tyres and Tyre Components  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  71989   National Certificate: Automotive Components: Manufacturing and Assembly  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  58862   National Certificate: Electro-Mechanical Winding  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  58720   National Certificate: Engineering Fabrication  Level 3  NQF Level 03  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  64829   National Certificate: Lifting Machine Operations  Level 3  NQF Level 03  Reregistered  2023-06-30  TETA 
    Elective  23255   National Certificate: Mechanical Engineering: Fitting and Machining  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  91926   National Certificate: Mechanical Engineering: Machining and Tooling  Level 3  NQF Level 03  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  67609   National Certificate: Mechatronics  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  79666   National Certificate: Metal and Engineering Manufacturing Processes  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  64190   National Certificate: Metals Production  Level 3  NQF Level 03  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  49449   National Certificate: Plastics Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  36155   National Certificate: Polymer Composite Fabrication  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  79407   National Certificate: Polymer Compound Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  21012   National Certificate: Power and Telecommunication Cable Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  24217   National Certificate: Thermoplastic Fabrication  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  48798   National Certificate: Tyre and Tyre Component Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  48795   National Certificate: Tyre Assembly  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  57886   National Certificate: Welding Application and Practice  Level 3  NQF Level 03  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. AA Forklift Training Centre 
    2. AA Technical Services PTY LTD 
    3. AAH Skills and Development 
    4. Accre-Com Training CC 
    5. Accredited Training 
    6. AETA Training Solutions 
    7. Africa International Training Facilities T/A AITF (BREDELL) (TP) 
    8. Agisanang SA Training 
    9. ALLOYS HEAD OFFICE 
    10. AME Skills Development Training Centre 
    11. Arcelor Mittal Steel Vanderbijlpark 
    12. ArcelorMittal South Africa Ltd (VANDERBIJLPARK) (TP) 
    13. Artisans in Motion Pty Ltd 
    14. Autobos Training Centre 
    15. Automotive Training Academy Lifting Equipment PTY Ltd 
    16. Aveng Grinaker -LTA Civil Engineering 
    17. Babcock Plant Services Pty Ltd 
    18. Bakubung Driver Training and consultants CC 
    19. Barloworld South Africa (Pty) Ltd T/A Barloworld-Equipment (ISANDO) (T 
    20. Bayteck Fire cc 
    21. Bell Equipment Company SA (Pty) Ltd (ALTON) (TP) 
    22. Best Ideas Training Academy 
    23. Bevline Mechanical Projects (Pty) Ltd (PROSPECTON) (TP) 
    24. BJS FORKLIFTS TRAINING 
    25. Blue Horison Properties 53 (Pty) Ltd T/A Durnacol Skills Innovation Hu 
    26. BMW SA (Pty) Ltd (ROSSLYN) (TP) 
    27. Buscor 
    28. Certified Training Solutions PTY Ltd 
    29. CHAMDOR DRIVER TRAINING CC 
    30. Circleway College 
    31. CLEO 
    32. Coastal Kzn F.E.T. College - Swinton Road Campus 
    33. Cre8tive Training & Research Solutions 
    34. Culmen Consultants cc 
    35. Culmen Wes-Kaap CC 
    36. Dawsons Training Academy (Pty) Ltd (DURBAN) (TP) 
    37. Day-To-Day Quality Equipments Training 
    38. Dee-Bravo Training Centre 
    39. Diversity technology Training Institute 
    40. DMG Global Training Solutions (Pty) Ltd 
    41. DON-DER TRUCK REPAIRS TRUST 
    42. Dreyer & Dreyer Risk Solutions 
    43. Driven Machinery Training Services cc 
    44. Driving Sense 
    45. DSQ Co 
    46. Dynalift cc 
    47. East Coast Professional Driver Training Academy Pty Ltd 
    48. Eastcape Midlands Public FET College - Uitenhage (High Street)Campus 
    49. Eastcape Training Centre 
    50. Econo Driver Training 
    51. Edidor 196 Pty Ltd 
    52. Edu Wize Group Pty Ltd 
    53. Ehlanzeni TVET College 
    54. Ekurhuleni West Public FET College - Germiston Campus 
    55. ESS Holdings (PTY) Ltd 
    56. Excellect 209 PTY LTD 
    57. Exclusive Training Services 
    58. Exodec 388 CC 
    59. False Bay Public FET College - Westlake Campus 
    60. Firsat (Pty) Ltd 
    61. Fost Training Pty (Ltd) 
    62. Further Education Trade Training 
    63. FVW Welding Academy(Johannesburg) (TP) 
    64. G T Training Service Provider 
    65. Gijima AST Holdings (Pty) Ltd T/A Fundi Training Centre (BENONI) (TP) 
    66. GijimaAst Holdings Pty Ltd 
    67. Goldee Trading Academy 176 
    68. Harvestine Investments 
    69. Hazchemwize PTY Ltd 
    70. He and She Driver Training Centre 
    71. Ikaheng HR Solutions Pty Ltd 
    72. Ikusasa Lethu Projects and Training (Pty) Ltd 
    73. Impact Skills Development (Pty) Ltd 
    74. Imperial Technical Training Academy (GERMISTON) (TP) 
    75. Imperial Technical Training Academy (WADEVILLE) (TP) 
    76. Industries Education & Training Institute (MAITLAND) (TP) 
    77. INDUSTRIES EDUCATION & TRAINING INSTITUTE - PE TTC 
    78. Itakane Trading 325 Pty Ltd 
    79. Izizwe Training Centre (Pty) Ltd T/A Simtech Training (NORTHDENE) (TP) 
    80. Jericho Safety Consultants (Pty) Ltd (TP) 
    81. JMC TECHNICAL TRAINING (Bloemfontein)(TP) 
    82. Kempston Driving Academy 
    83. Khabanyane Training and development 
    84. Kholwa Management and training Consultancy 
    85. Kriel Training (PTY) LTD 
    86. Kulika Training and Consultancy Pty Ltd 
    87. KwaZulu Automotive Training Services cc (KZN) (DURBAN) (TP) 
    88. Learncore 
    89. Learning Exchange Pty Ltd 
    90. LEFA Training and Projects 
    91. Leibrandt Training Academy CC 
    92. Licence Wise 
    93. Lifting Operator Training Centre cc 
    94. LTM Training and Remote Learning Solutions 
    95. M AND C ACADEMY AND CONSULTANCY PTY LTD 
    96. Madibeng Edu Centre and Suppliers Pty Ltd 
    97. Majuba FET College - Newcastle Technology Centre 
    98. Malamba Forklift Training 
    99. Matimba Rigging & Training (SECUNDA) (TP) 
    100. McCarthy Academy Cape Town (BLACKHEATH) (TP) 
    101. McCarthy Automotive Artisan Academy (MIDRAND) (TP) 
    102. McCarthy Automotive Artisans Academy (PINETOWN) (TP) 
    103. Mediro Training Academy 
    104. Merrod Trading 122 Pty Ltd 
    105. Mkholo Pardon Training Institution 
    106. MMBG Trading And Consulting 
    107. Mnce Trading cc 
    108. Mobile Training cc 
    109. Modern Technical College FET 
    110. Mopani South East FET College - Phalaborwa Campus 
    111. MPACT 
    112. Mpact Operations Paper Springs 
    113. Mtimande & Associates 
    114. Ndwamato Training Solutions PTY LTD 
    115. Nghunyule Investments 
    116. Nissan SA (Pty) Ltd (ROSSLYN) (TP) 
    117. NORTH WEST COMMUNITY BASED ORGANIZATIONS NETWORK 
    118. Northlink College - Bellville Campus 
    119. NOSHTAC Training and Consulting cc 
    120. Nowethu Learning Institute cc 
    121. Ntalo Training & Consulting Services 
    122. OHSTEC 
    123. Orbit FET College - Rustenburg Campus 
    124. OSR Trading 
    125. Powergate Training 
    126. Precision skills development and training 
    127. Primeserv Corporate Solutions Pty Ltd 
    128. Pro - Con Skills Centre 
    129. Pro Skills Development (Pty) Ltd 
    130. PRO Skills Development Pty Ltd 
    131. Progressive Computer Center 
    132. Protrain Solutions 
    133. PUTCO Pty Ltd 
    134. QMS Training 
    135. Qualitas Training cc (SELBY) (TP) 
    136. R & V Training 
    137. RPL MERCHANDISING TRAINING 
    138. Safety Skills Development Training 
    139. Salestalk 88 Pty Ltd T/A Concord Skills and Training 
    140. SAMSONS SCHOOL OF WELDING 
    141. Samsons School of Welding T/A Samsons Skills Development Institute (DU 
    142. SAPPI LTD 
    143. SAPPI SAICCOR (PTY) LTD (Umkomaas) 
    144. SC Training and Consulting 
    145. Sediba Sabasadi Skills Training Academy (Pty) Ltd 
    146. SEDIBENG TRAINING CENTRE 
    147. Seng''khona Trading Enterprise 129 cc 
    148. Service Corps T/A Works Training School (ELANDSFONTEIN) (TP) 
    149. Seshego Risk Management Solutions (Pty) Ltd 
    150. SG Coal (Pty) Ltd (TP) 
    151. Sharp Edge Consulting and Training 
    152. SHEPROSA PTY LTD 
    153. Shukela Training Centre 
    154. Sisabenza Operator Training (PTY) LTD 
    155. SSS Sheet Metal Work cc T/A Sheetech SA (DURBAN) (TP) 
    156. St Anthony's Education Centre (BOKSBURG) (TP) 
    157. Starcrow 36 Bk 
    158. Steinmuller Africa (Pty) Ltd T/A Steinmuller Technical Training Academ 
    159. Striving Mind Academy and Consultancy Pty Ltd 
    160. SVA Training 
    161. Swift Skills Academy (SASOLBURG) (TP) 
    162. T Africa Health & Safety Specialists (Pty) Ltd 
    163. Tagane Trading and Training Services Pty Ltd. 
    164. Tekmation (Pty) Ltd T/A Tekmation Training Institute (DURBAN) (TP) 
    165. The Assessment Zone (Pty) Ltd 
    166. The Automobile Association of South Africa NPC T/A The AA Technical College(MIDRAND) (TP) 
    167. The Automobile Association of South Africa T/A AA Training Academy (MO 
    168. THE SAJ COMPETENCY TRAINING INSTITUTE CC 
    169. The Skills Authority 
    170. TIRHANI SKILLS FOR AFRICA 
    171. Tjeka Training Matters Pty Ltd 
    172. Toyota Academy Toyota SA Motors (Pty) Ltd (SANDTON) (TP) 
    173. Training Consultant and SD College 
    174. Transnet Rail Engineering Bloemfontein Centre 
    175. Transnet Rail Engineering Cape Town Centre 
    176. Transnet Rail Engineering Durban Training Centre 
    177. Transnet Rail Engineering Koedoespoort Training Centre 
    178. Transnet Rail Engineering UitenhageTraining Centre 
    179. TRANSVAAL COLLEGE OF EDUCATION 
    180. Transvaal Legislative Training 
    181. Transvaal Training 
    182. Truck Crane Training Specialists 
    183. True-Blue Training (Pty) Ltd 
    184. Tshireletso Multi-skills and Training 
    185. Umfolozi FET College - Central Office 
    186. Umfolozi FET College - Mandeni Campus 
    187. Umgungundlovu FET College - Plessislaer Campus 
    188. Uzoyithola Training and Consulting 
    189. VEB CELE & Associates (Pty) Ltd 
    190. Volkswagen of South Africa (Pty) Ltd (CENTURION) (TP) 
    191. Volkswagen of South Africa (Pty) Ltd - Technical Learning Academy (UIT 
    192. West Coast Public FET College - Vredenburg Campus 
    193. Wheelman S A 
    194. WHSE Training College (Pty) Ltd 
    195. Wilbat Projects 148 (Pty) Ltd (ISIPINGO) (TP) 
    196. World Focus 382 cc T/A Richards Bay Technical Training & Assessment Centre (ZCBF) (RICHARDS BAY) (TP) 
    197. YouLearnIT Academy 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.