SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Operate a cab controlled overhead crane 
SAQA US ID UNIT STANDARD TITLE
116231  Operate a cab controlled overhead crane 
ORIGINATOR
SGB Civil Engineering Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Civil Engineering Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The qualifying learner is capable of:

Demonstrating an integrated practical and theoretical grounding in Crane Operations according to safe handling and maintenance practices in compliance with crane manufacturer's and legislated standards.

The contribution to The National Skills Development Strategy is the key developmental interface between learners and new competencies to be achieved.

Learners who master the applied competence described in this unit standard will contribute to the development of a professional community of Civil Engineering Construction Crane Operators who are able to competently use science and technology when applying operation techniques
The contribution to socio-economic transformation is that learners will be able to undergo RPL-assessment and thereby receive recognition for previous learning and experience. This in turn will enhance the employability and career prospects of learners employed in this sector. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
The following knowledge, skills attitude and/or equivalent:
Learning assumed to be in place
NQF Level 1 Numeracy and NQF Level 1 Literacy

The operator should be declared physically fit and have completed an eyesight test (such as the Orthorator test, the Purdue University Test No. 3, etc.) and an industry recognised depth perception and hand-eye co-ordination test.

It is assumed that people starting to learn towards this unit standard have already undergone company induction, have an appropriate licence to operate in the work area, and are competent in unit standards which address:
  • Relevant Code of practice
  • Occupational Health, Safety and General Housekeeping
  • Mechanical Awareness and Plant Appreciation 

  • UNIT STANDARD RANGE 
    Limited to work carried out on a standard crane, or with standardised fittings

    Major components may include but is not limited to: brakes, ropes, sheaves, load equalisers, load indictors, limit warning devices, slings, spreaders, hooks, bins, tongs, grabs, magnets.

    Lifting equipment may include but is not limited to
    wire slings, chains, magnets, nylon straps, lifting beams, spreader bars

    Factors influencing safety and suitability of a crane:

    Hazards may include but is not limited to - access, obstructions, field of vision, communications, travel route, unauthorised people, insecure loads, unstable loads, unknown loads, nature of loads.

    Statutory requirements include but are not limited to:
  • Relevant Code of practice
  • Safety, Health & Environmental legislation

    Local Provincial authority requirements Appropriate checklist is any one or a combination of the following:
  • Manufacturer's checklist
  • Pre-operational checklist
  • Site-specific checklist
  • Daily checklist
  • Weekly checklist
  • Site-specific checklist

    Inspecting and recording the operational fitness of all components of the crane should cover:
  • Structural Components
  • Mechanical & Electrical Systems
  • Controls & levers
  • Chassis & Ballast


    within convenient reach of load, sound solid ground - wheels, outriggers; blocking, pads, clear slewing area with load, work area cordoned off

    Worksite procedures include manufacturer's procedures, operators manuals and site operational requirements, or similar procedures
  • Corrective action includes inspections and/or reporting
  • Controls include levers, switches, joy sticks and pedals where applicable
  • Forwards, reverse, left, right, gear selection, braking
  • All implement and attachment movements
  • Corrective action includes repairing and/or reporting 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of the functions of a cab controlled overhead crane. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The main functions of Cab Controlled Overhead Crane's are explained in terms of manufacturer's specifications. 

    ASSESSMENT CRITERION 2 
    The operation of all major components is explained in terms of their functions 

    ASSESSMENT CRITERION 3 
    All safety features and warning devices on the crane are identified, and their purposes explained in accordance with manufacturer's specifications 

    ASSESSMENT CRITERION 4 
    The maximum operating capacities are explained in terms of the designed crane capabilities 

    ASSESSMENT CRITERION 5 
    Warnings from crane indicators and gauges are explained according to manufacturer's specifications 

    ASSESSMENT CRITERION 6 
    Corrective actions are described or demonstrated in terms of neutralising warnings received 

    SPECIFIC OUTCOME 2 
    Identify the safety and suitability of the crane. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Demonstrate the ability to identify the suitability of the crane prior to utilisation 

    ASSESSMENT CRITERION 2 
    Demonstrate ability to assess operational capability of lifting equipment (e.g. correct SWL of slings etc). 

    ASSESSMENT CRITERION 3 
    Demonstrate an understanding of the influence of load/range characteristics, manufacturers' requirements and environmental conditions. 

    ASSESSMENT CRITERION 4 
    Demonstrate an understanding of what constitutes safety in the broader working environment, and when operating a Cab Controlled Overhead crane in compliance with statutory regulations. 

    SPECIFIC OUTCOME 3 
    Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Pre-operational checks are carried out according to appropriate checklist. 

    ASSESSMENT CRITERION 2 
    Daily and weekly operator maintenance is performed according to the appropriate post-operational checklist and recordkeeping using a logbook 

    ASSESSMENT CRITERION 3 
    Checklist is completed according to worksite procedures and corrective action taken if required, ensuring compliance with manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    Appropriate measures used to rectify and/or prevent basic faults and defects in the mechanical function of the crane are identified. 

    SPECIFIC OUTCOME 4 
    Operate a cab controlled overhead crane. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The purpose of the various controls is explained in accordance with their designed use. 

    ASSESSMENT CRITERION 2 
    Functions of the various controls are demonstrated in accordance with the manufacturer's specifications. 

    ASSESSMENT CRITERION 3 
    Controls are used to effectively manoeuvre the crane within manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    Safe working procedures are followed according to manufacturer's specifications, site specific and statutory requirements. 

    ASSESSMENT CRITERION 5 
    Crane performance is monitored and corrective action is taken when necessary, in accordance with manufacturer's manual. 

    ASSESSMENT CRITERION 6 
    Crane is operated without risk of damage or loss to Crane or property, or injury to people. 

    ASSESSMENT CRITERION 7 
    Hazards specific to operating a Cab Controlled Overhead Crane's and ways to minimise these are explained in terms of potential damage to Crane and property, and injury to people. 

    ASSESSMENT CRITERION 8 
    Start-up and shutdown procedures are followed according to manufacturer's manual 

    ASSESSMENT CRITERION 9 
    Crane is parked according to manufacturer's and company / site requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the CETA-ETQA
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the CETA-ETQA
  • CETA-ETQA or other ETQA's who have a Memorandum of Understanding in place with CETA-ETQA would be responsible for moderation of learner achievements of learners who meet the requirements of this qualification 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • The Cab Controlled Overhead Crane's operating procedures and main functions of all major components and systems
  • The maximum operating capacities of the designed working capabilities.
  • Statutory requirements including the Relevant Code of practice and Safety, Health & Environmental legislation
  • Recognized hand signals (and other methods of communication) to direct the crane movements.
  • Selection of crane against environmental restraints. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems

    Evident in the following specific outcomes and assessment criteria:

    Demonstrate Knowledge of the Functions of a Cab Controlled Overhead Crane
  • Corrective actions are described or demonstrated in terms of neutralising warnings received. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others

    Evident in the following specific outcomes and assessment criteria:

    Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane > Checklist is completed according to worksite procedures and corrective action taken if required, ensuring compliance with manufacturer's specifications. 

    UNIT STANDARD CCFO ORGANISING 
    Employ self management

    Evident in the following specific outcomes and assessment criteria:

    Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane
  • Daily and weekly operator maintenance is performed according to the appropriate post-operational checklist and recordkeeping using a logbook 

  • UNIT STANDARD CCFO COLLECTING 
    Manage information

    Evident in the following specific outcomes and assessment criteria:

    Demonstrate Knowledge of the Functions of a Cab Controlled Overhead Crane
  • Warnings from crane indicators and gauges are explained according to manufacturer's specifications. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively

    Evident in the following specific outcomes and assessment criteria:

    Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane > Appropriate measures used to rectify and/or prevent basic faults and defects in the mechanical function of the crane are identified. 

    UNIT STANDARD CCFO SCIENCE 
    Demonstrate scientific and technological competence

    Evident in the following specific outcomes and assessment criteria:

    Identify the safety and suitability of the crane.
  • Demonstrate ability to assess operational capability of lifting equipment (e.g. correct SWL of slings etc).
  • Demonstrate an understanding of what constitutes safety in the broader working environment, and when operating a Cab Controlled Overhead crane in compliance with statutory regulations. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Understand contextual world-systems

    Evident in the following specific outcomes and assessment criteria:

    Identify the safety and suitability of the crane.
  • Demonstrate an understanding of what constitutes safety in the broader working environment, and when operating a Cab Controlled Overhead crane in compliance with statutory regulations.

    Operate a Cab Controlled Overhead Crane
  • Hazards specific to operating Cab Controlled Overhead Crane's and ways to minimise these are explained in terms of potential damage to machine and property, and injury to people. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  66029   General Education and Training Certificate: Chemical Operations  Level 1  NQF Level 01  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  48961   National Certificate: Construction: Crane Operations  Level 2  NQF Level 02  Reregistered  2023-06-30  CETA 
    Elective  59729   National Certificate: Mechanical Handling (Rigging)  Level 2  NQF Level 02  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  48794   National Certificate in Quality Checking of Tyres and Tyre Components  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  71989   National Certificate: Automotive Components: Manufacturing and Assembly  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  58862   National Certificate: Electro-Mechanical Winding  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  58720   National Certificate: Engineering Fabrication  Level 3  NQF Level 03  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  64829   National Certificate: Lifting Machine Operations  Level 3  NQF Level 03  Reregistered  2023-06-30  TETA 
    Elective  23255   National Certificate: Mechanical Engineering: Fitting and Machining  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  91926   National Certificate: Mechanical Engineering: Machining and Tooling  Level 3  NQF Level 03  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  67609   National Certificate: Mechatronics  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  79666   National Certificate: Metal and Engineering Manufacturing Processes  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  64190   National Certificate: Metals Production  Level 3  NQF Level 03  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  49449   National Certificate: Plastics Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  36155   National Certificate: Polymer Composite Fabrication  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  79407   National Certificate: Polymer Compound Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  21012   National Certificate: Power and Telecommunication Cable Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  24217   National Certificate: Thermoplastic Fabrication  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  48798   National Certificate: Tyre and Tyre Component Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  48795   National Certificate: Tyre Assembly  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  57886   National Certificate: Welding Application and Practice  Level 3  NQF Level 03  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. 123 Mulani Investment 
    2. AA Forklift Training Centre 
    3. AA Technical Services (PTY) LTD 
    4. AAH Skills and Development 
    5. Accredited Training 
    6. ACT SKILLS DEVELOPMENT 
    7. Adimire Operators Skills Training Centre 
    8. AETA Training Solutions 
    9. Afrimat Training Center Pty (Ltd) 
    10. Akane Training Academy 
    11. Alika Investment CC 
    12. AMA Training Skills Devleopment Centre 
    13. Amphi SA (Pty) Ltd 
    14. Automotive Training Academy Lifting Equipment (pty)Ltd 
    15. Aveng Grinaker -LTA Civil Engineering 
    16. Azutron (Pty) Ltd 
    17. Bakubung Driver Training and consultants CC 
    18. Bayteck Fire cc 
    19. Bee-Safe Programme Development and Training (Pty) Ltd 
    20. Bessonic Investments 
    21. Best Hope Academy & Consultancy 
    22. Big J Training Academy 
    23. Biva Investments (Pty) Ltd 
    24. BJS FORKLIFTS TRAINING 
    25. Certified Training Solutions (PTY) Ltd 
    26. Certified Training Solutions PTY Ltd 
    27. CHAMDOR DRIVER TRAINING CC 
    28. Circleway College 
    29. CLEO 
    30. Continuous Development Training 
    31. Culmen Wes-Kaap CC 
    32. Day-To-Day Quality Equipments Training 
    33. Dee-Bravo Training Centre 
    34. Die Mnyandoro''s G.M. Agency (Pty) Ltd 
    35. Diversity technology Training Institute 
    36. DMG Global Training Solutions (Pty) Ltd 
    37. DQ Staffing Solutions 
    38. Dreyer & Dreyer Risk Solutions 
    39. Drive for Africa Training and Evaluation 
    40. Driven Machinery Training Services cc 
    41. Driving Sense 
    42. DSQ Co 
    43. Econo Driver Training 
    44. Edu Wize Group Pty Ltd 
    45. Educon Training and Development PTY LTD 
    46. Elite Operator & Skills Development 
    47. Enstra Learning and Development Centre (Pty) Ltd 
    48. Excellect 209 (PTY) LTD 
    49. Excellect 209 PTY LTD 
    50. Exclusive Training and Services 
    51. Exclusive Training Services 
    52. Fost Training Pty (Ltd) 
    53. G T Training Service Provider 
    54. GijimaAst Holdings (Pty) Ltd 
    55. GijimaAst Holdings Pty Ltd 
    56. Goldee Trading Academy 176 
    57. Goodwill Training Skills 
    58. GREENRIM TRAINING PTY LTD 
    59. He and She Driver Training Centre 
    60. Human Resources Education Training & Development 
    61. Ikaheng HR Services Pty Ltd 
    62. Ikusasa Lethu Projects and Training (Pty) Ltd 
    63. Immenent HR Solutions CC 
    64. Innovative Learning Solutions (PTY) LTD 
    65. Interlink Technical Training 
    66. Iyanda Holdings(Pty) Ltd 
    67. Jonoglo (Pty) Ltd 
    68. Kahisano Skills Development and Training 
    69. Khabanyane Training and development 
    70. Khamafi Training cc 
    71. Kholwa Management and training Consultancy 
    72. Kriel Training (PTY) LTD 
    73. Kulika Training and Consultancy Pty Ltd 
    74. Kutrix SA (Pty) Ltd 
    75. Learning Exchange Pty (Ltd) 
    76. Lefa Skills Academy 
    77. LEFA Training and Projects 
    78. Lex Training (Pty) Ltd 
    79. Licence Wise 
    80. Lifting Machinery Training 
    81. Lifting Operator Training Centre cc 
    82. LTM Training & Remote Learning Solutions 
    83. LTM Training and Remote Learning Solutions 
    84. M AND C ACADEMY AND CONSULTANCY PTY LTD 
    85. MadibengGeneral Suppliers 
    86. Magas Training and Development (Pty) Ltd 
    87. Majuba FET College - Newcastle Technology Centre 
    88. Malamba Forklift Training 
    89. Matovu Training Center 
    90. Maximum Dev Institute Primary Co-Operative Limited 
    91. Mega Lifting Training Solutions (Pty) Ltd 
    92. Merrod Trading 122 Pty Ltd 
    93. Miclos Trading (Pty) Ltd 
    94. Mitana Training Consultants Pty Ltd 
    95. Mittal Steel Newcastle 
    96. MMBG Trading And Consulting 
    97. MMTI Holdings 
    98. Mnce Trading cc 
    99. Mobile Training cc 
    100. Modern Technical College FET 
    101. Mphatlalatsane Learning Resources 
    102. Mpofu Engineering Projects 
    103. Mziphela Training and Projects Pty. Ltd 
    104. NDWAMATO TRAINING SOLUTIONS (PTY) LTD 
    105. Ndwamato Training Solutions PTY LTD 
    106. Nelko Training MP (Pty) Ltd 
    107. Nirvana Training Academy 
    108. NORTH WEST COMMUNITY BASED ORGANIZATIONS NETWORK 
    109. Nowethu Learning Institute cc 
    110. Numfield Trading Enterprises Pty Ltd 
    111. OHSTEC 
    112. OSR Trading 
    113. Petra Projects and Enterprises 
    114. Phephani Learnerships cc 
    115. Powergate Training 
    116. Precision skills development and training 
    117. Primeserv Corporate Solutions (Pty) Ltd 
    118. PRO Skills Development (Pty) Ltd 
    119. PRO Skills Development Pty Ltd 
    120. Protrain Solutions 
    121. Proviso Training College Pty Ltd 
    122. Quantum Leap College Pty Ltd 
    123. R and T Training (Pty) Ltd 
    124. Renntek Pty Ltd 
    125. Safety and Training Solutions (Pty) Ltd 
    126. Safety Haz Training (PTY) Ltd 
    127. Safety Skills Development Training 
    128. Salestalk 88 ( Pty) Ltd T/A Concord Skills and Training 
    129. Scaw Metals 
    130. SDC Transport and Logistics (Pty) Ltd 
    131. Sebenza Education & Training Pty Ltd 
    132. Sediba Sabasadi Skills Training Academy (Pty) Ltd 
    133. Seng''khona Trading Enterprise 129 cc 
    134. Seshego Risk Management Solutions (Pty) Ltd 
    135. Simunye Training & Development (Pty) Ltd 
    136. Sisabenza Operator Training (PTY) LTD 
    137. Siyashayela Training and Development 
    138. Skills for All 
    139. Skills Force Training Centre 
    140. Solly''s SkillsTraining Centre 
    141. Sqalile Trading and Projects 
    142. SSS TRAINING SERVICES (PTY) LTD 
    143. Staffing Logistics 
    144. Starcrow 36 Bk 
    145. Strat Training 
    146. Striving Mind Academy and Consultancy Pty Ltd 
    147. SVA Training 
    148. Tamar Academy (Pty) Ltd 
    149. Tasa Training Services cc 
    150. The Assessment Zone (Pty) Ltd 
    151. Thwala Training Services (Pty) Ltd 
    152. TIRHANI SKILLS FOR AFRICA 
    153. Training Consultant and SD College 
    154. Trainsure -Tsebo Traiding cc 
    155. Transnet Rail Engineering Bloemfontein Centre 
    156. Transnet Rail Engineering UitenhageTraining Centre 
    157. TRANSVAAL COLLEGE OF EDUCATION 
    158. Transvaal Legislative Training 
    159. Transvaal Training 
    160. Truck Crane Training Specialists 
    161. True-Blue Training (Pty) Ltd 
    162. Tshireletso Multi-skills and Training 
    163. TYT Training Academy 
    164. Uplift Quality Solutions Pty Ltd 
    165. Uthingo Training Centre 
    166. Uzoyithola Training and Consulting 
    167. Various Aligned Safety And Training 
    168. Vhonisani Training Academy & Projects 
    169. Wheelman S A 
    170. Wild Boar Fire cc 
    171. York Timbers 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.