SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Apply quality principles on a construction site 
SAQA US ID UNIT STANDARD TITLE
9986  Apply quality principles on a construction site 
ORIGINATOR
SGB Building Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Building Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  12 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2026-06-30   2029-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The purpose of this Unit Standard is to enable Construction Contractors to manage quality, and to apply specifications on a construction project. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
FETC NQF Level 2 literacy and numeracy competencies. 

UNIT STANDARD RANGE 
1. Quality improvement principles include: the cost of non- conformance, the establishment of acceptable quality targets, conformance to requirements, and the reduction in defects.
2. Specifications include Standard and Project Specifications, including any corrections and amendments to the Standard Specifications.
3. Documents that contain specification information and quality requirements include: The standard specifications, project document, drawings, and information from the Client / Clients Representative. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Implement a Quality Improvement process. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Quality improvement principles are applied. 

ASSESSMENT CRITERION 2 
2. Work methods include quality specifications. 

SPECIFIC OUTCOME 2 
Implement a Quality Control System. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Inspection procedures are implemented. 

ASSESSMENT CRITERION 2 
2. Testing and sampling procedures are established. 

ASSESSMENT CRITERION 3 
3. Process control testing procedures are implemented. 

ASSESSMENT CRITERION 4 
4. Acceptance control testing is complied with. 

SPECIFIC OUTCOME 3 
Apply specifications on a project. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Specifications are applied in the method of all work activities. 

ASSESSMENT CRITERION 2 
2. Information in the specification documents are accessed correctly. 

ASSESSMENT CRITERION 3 
3. Resource procurement is performed according to specifications. 


UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
Assessment of learner achievements takes place at providers accredited by CETA (RSA, 1998b) for the provision of programs that result in the outcomes specified for the Certificate in Construction Contracting. CETA is responsible for moderation of learner achievements of learners who meet the requirements of this unit standard. 

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
Qualifying learners understand and can explain:

1. Contract documents that contain quality and specification information.
2. Procedures in complying with "end-product" acceptance control testing.
3. The implications of non-compliance with quality requirements.
4. Procedures in establishing process control systems. 


Critical Cross-field Outcomes (CCFO): 

UNIT STANDARD CCFO IDENTIFYING 
Identify and solve problems

1. Implement a Quality Improvement process.
  • Quality improvement principles are applied. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others

    1. Implement a Quality Control System.
  • Inspection procedures are implemented. 

  • UNIT STANDARD CCFO ORGANISING 
    Employ self management

    1. Implement a Quality Improvement process.
  • Quality improvement principles are applied. 

  • UNIT STANDARD CCFO COLLECTING 
    Manage information

    1. Implement a Quality Control System.
    2. Apply specifications on a project.
  • Inspection procedures are implemented.
  • Testing and sampling procedures are established.
  • Process control testing procedures are implemented.
  • Acceptance control testing is complied with.
  • Information in the specification documents are accessed correctly. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively

    1. Implement a Quality Control System.
  • Inspection procedures are implemented. 

  • UNIT STANDARD CCFO SCIENCE 
    Understand Contextual world-systems

    1. Implement a Quality Improvement process.
  • Quality improvement principles are applied. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate scientific and technological competence

    1. Implement a Quality Improvement process.
    2. Implement a Quality Control System.
    3. Apply specifications on a project.
  • Quality improvement principles are applied.
  • Acceptance control testing is complied with.
  • Specifications are applied in the method of all work activities.
  • Information in the specification documents are accessed correctly. 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  49410   National Certificate: Construction  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Core  20813   National Certificate: Construction Contracting  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Core  65789   National Certificate: Construction Plant Operations  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Core  48961   National Certificate: Construction: Crane Operations  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Core  48940   National Certificate: Construction: Plant Operations  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2012-06-30  CETA 
    Core  49016   National Certificate: Construction: Concreting  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Core  49602   National Certificate: Construction: Geotechnical  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Core  24173   National Certificate: Construction: Roadworks  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Core  49015   National Certificate: Construction: Structural Steel Erecting  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2009-05-13  Was CETA until Last Date for Achievement 
    Elective  49411   General Education and Training Certificate: Construction  Level 1  NQF Level 01  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Elective  61689   National Certificate: Community Water, Health and Sanitation Promotion  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  EWSETA 
    Elective  24133   National Certificate: Construction: Roadworks  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 
    Elective  96402   National Certificate: Hot Water System Installation  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  65709   National Certificate: Construction: Steelwork  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Abasizi Contractor Development Services Pty Ltd 
    2. Academy for Construction Skills (Pty) Ltd (ACS) 
    3. Africa International Training Facilities T/A AITF (BREDELL) (TP) 
    4. Akaf Bodyguards 
    5. ALLINA FRANCIS (SA) 
    6. Aveng Grinaker -LTA Civil Engineering 
    7. AVUXENI COMPUTER ACADEMY KZN 
    8. Better Best Agri Development 
    9. BOLAND COLLEGE (Paarl) 
    10. Bright Storm Projects 
    11. Capricorn FET College - Central Office 
    12. CLEAN HEAT ENERGY SAVING SOLUTIONS (PTY) LTD 
    13. Construction Resource Development College 
    14. CSTA Training Academy 
    15. Double ST Training and Skills Development 
    16. Eastcape Training Centre 
    17. EDUCATORY ELECTRO SERVICES 
    18. Elite Operator and Skills Training 
    19. ENTELEKEY GROUP 
    20. ERGO MAPHELONG INSTITUTE (PTY) LTD 
    21. ESKOM GENERATION - PALMIET PUMP STORAGE GRABOUW 
    22. Goldfields FET College 
    23. Ikemeleng Training and Development Services 
    24. imithetho labour law 
    25. In Touch Community Development & Project Managers 
    26. Leps Training Consultants 
    27. Madzahisi College 
    28. Mahumani Empowerment Servives Centre 
    29. Masana Social Consultants cc 
    30. Mavco Engineering 
    31. Microzone Training CC 
    32. MOLOKO SMALL ENTERPRISE 
    33. Motheo Academy PTY LTD 
    34. MTL Training and Projects 
    35. Namuntlha Training and Development (Pty)Ltd 
    36. National African Federated Building Industry 
    37. Nkqubela Community Developers 
    38. Northlink TVET College 
    39. Novi General Services 
    40. NTANDOKAZI HOLDINGS (PTY) LTD 
    41. Othandweni Training Centre 
    42. PIONEER BUSINESS CONSULTING (PTY) LTD 
    43. POWER SYSTEMS TRAINING, CAPE TOWN 
    44. Pro Skills Development (Pty) Ltd 
    45. PROEARTH Pty Ltd 
    46. Protech Training (Pty) Ltd 
    47. Raubex Construction Pty (Ltd) 
    48. Regen Technical Institute Pty Ltd 
    49. RUTHEKHO TRAINING ACADEMY (PTY) LTD 
    50. Sakhisizwe Development Training 
    51. Schoolboy Training Centre 
    52. SEDA Construction Incubator Trust 
    53. Sheq and Environmental Projects 
    54. Somvi General Services 
    55. Sonani Training and Communications 
    56. South African Value Education (Pty) Ltd 
    57. Thabomeleng 
    58. Tjeka Training Matters Pty Ltd 
    59. Tovani Traiding 299 
    60. Training Force (Pty) Ltd 
    61. Transvaal Training 
    62. TSHWANE LEADERSHIP AND MANAGEMENT ACADEMY (PREMOS) 
    63. TSK Projects(PTY)LTD 
    64. Zama Training & Development cc 
    65. Zibuyile Consulting and Projects (Pty) Ltd 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.