SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Apply basic conservation management planning 
SAQA US ID UNIT STANDARD TITLE
8388  Apply basic conservation management planning 
ORIGINATOR
SGB Nature Conservation 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Nature Conservation 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 5  Level TBA: Pre-2009 was L5  4 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2004-12-02  2007-12-02  SAQA 1657/04 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2008-12-02   2011-12-02  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
253965  Apply basic conservation management planning  Level 5  Level TBA: Pre-2009 was L5  4   

PURPOSE OF THE UNIT STANDARD 
The qualifying learner assessed as competent against this standard will be able to apply the concept of management planning, participate in the development and implementation of a plan and understand its significance and use in Nature Conservation. This will contribute toward the professional development and maintenance of good planning practice and implementation in the qualifying learner. Achievement of this standard will enhance the qualifying learner's employability in the field on Conservation and related fields. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
Communication skills and Numeracy ABET 4. 

UNIT STANDARD RANGE 
Guides to the scope and complexity of the specific outcomes and essential embedded knowledge are provided in bullet points beneath each. These are prefaced by "for example" since they are neither comprehensive nor necessarily appropriate to all contexts. Alternatives must however be comparable in scope and complexity.

These are intended only as a general guide to scope and complexity of what is required. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Follow an accepted format when planning basic work activities in a conserved area. 
OUTCOME RANGE 
For example / Range:
  • Preparing infrastructure maintenance plans, security plans, Catchment Management plans, problem plant control, soil erosion control, plant management. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.


    METHOD OF ASSESSMENT:

    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.


    Integrated assessment:

    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 
    		•
    ASSESSMENT CRITERION RANGE 
    A range of assessment methods should be used, including:
  • Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
  • Product sample - examine the outcomes previously produced by the practitioner
  • Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)
     
    		•

    SPECIFIC OUTCOME 2 
    Follow a planning cycle in carrying out an action. 
    OUTCOME RANGE 
    For example / Range:
  • Participate in planning and implement necessary actions to reach specific goals, and plan actions taken in context of the management plan. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.

    METHOD OF ASSESSMENT:

    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.


    Integrated assessment:

    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 
    		•
    ASSESSMENT CRITERION RANGE 
    A range of assessment methods should be used, including:
  • Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
  • Product sample - examine the outcomes previously produced by the practitioner
  • Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)
     
    		•

    SPECIFIC OUTCOME 3 
    Use a management plan, to prioritise annual activities in a conservation area over the year. 
    OUTCOME NOTES 
    Use a management plan, to prioritise annual activities in a conservation area over the period of a year. 
    OUTCOME RANGE 
    For example / Range:
  • Interpret an existing management plan to develop and implement activities over a year.
  • Include considerations of previous planning periods' goals achieved / not achieved.
  • Allow for seasonal cycles. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.


    METHOD OF ASSESSMENT:

    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.


    Integrated assessment:

    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 
    		•
    ASSESSMENT CRITERION RANGE 
    A range of assessment methods should be used, including:
  • Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
  • Product sample - examine the outcomes previously produced by the practitioner
  • Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)
     
    		•

    SPECIFIC OUTCOME 4 
    Assess and report on goals achieved. 
    OUTCOME RANGE 
    For example / Range:
  • Provide a reasoned evaluation of goals achieved. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.

    METHOD OF ASSESSMENT

    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.


    Integrated assessment:

    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 
    		•
    ASSESSMENT CRITERION RANGE 
    A range of assessment methods should be used, including:
  • Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
  • Product sample - examine the outcomes previously produced by the practitioner
  • Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)
     
    		•


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQAs policies and guidelines for assessment and moderation; in terms of agreements reached around assessment and moderation between ETQAs (including professional bodies); and in terms of the moderation guideline detailed under point 4 immediately below.
  • Moderation must include both internal and external moderation of assessments at exit points of the qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual unit standards as well as the integrated competence described in the qualification.

    Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution which is accredited by the relevant ETQA. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The qualifying learner is able to demonstrate a basic knowledge and understanding of :

    1. Management plans and how s/he can contribute to them.
    2. The use of year planners.
    3. SWOT techniques.
    4. Including defining a goal that has the essential elements (SMART: specific, measurable, achievable, resourced, time).
    5. Planning techniques.
    6. Short term planning cycles.
    7. Critical thinking processes. 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Problem Solving

    Inter-relatedness of systems 

    UNIT STANDARD CCFO WORKING 
    Teamwork 

    UNIT STANDARD CCFO ORGANISING 
    Self-organisation 

    UNIT STANDARD CCFO COLLECTING 
    Information evaluation 

    UNIT STANDARD CCFO COMMUNICATING 
    Communication 

    UNIT STANDARD CCFO SCIENCE 
    Use of science and technology 

    UNIT STANDARD ASSESSOR CRITERIA 
    The assessment of qualifying learners against this standard should meet the requirements of established assessment principles.

    It will be necessary to develop assessment activities and tools which are appropriate to the contexts in which qualifying learners are working. These activities and tools may include an appropriate combination of self-assessment and peer assessment; formative and summative assessment; portfolios and observations etc.

    The assessment should ensure that all the specific outcomes, critical cross-field outcomes and essential embedded knowledges are assessed.

    The specific outcomes must be assessed through observation of performance. Supporting evidence should be used to prove competence of specific outcomes only when they are not clearly seen in the actual performance.

    Essential embedded knowledge must be assessed in its own right, through oral and written evidence. It cannot be assessed only through seeing the knowledge being applied.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a qualifying learner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a qualifying learner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent

    Evidence of the specified critical cross-field outcomes should be found both in performance and in the essential embedded knowledge.

    Performance of the specific outcomes must actively affirm target groups of qualifying learners and not unfairly discriminate against any qualifying learners. Qualifying learners should also be able to justify their performance in terms of these values. 

    UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 253965, which is "Apply basic conservation management planning", Level 5, 4 credits.

    Demonstration of the knowledge and skills outlined in this unit standard must be consistent with the principles of:

    1. Maintaining essential ecological processes and life-support systems
    2. Maintaining genetic, species and ecosystem diversity
    3. Considering ecological and social rights and responsibilities, whilst ensuring sustainable utilisation of species and ecosystems
    4. Thereby yielding the greatest sustainable and equitable benefit to present generations whilst maintaining the potential to meet the needs and aspirations of future generations. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  20153   National Certificate: Conservation: Fisheries Resource Management  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered"     		 2012-06-30  CATHSSETA 
    Core  20416   National Certificate: Conservation: Natural Resource Management: Terrestrial  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered"     		 2008-03-12  Was CATHSSETA until Last Date for Achievement 
    Fundamental  49626   National Certificate: Landcare Facilitation  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  AgriSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Balemi Consulting Pty Ltd 
    2. Mananthatshema Skills Dev. Centre 
    3. Mbimbini Training and Community Development 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.