SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Dismantle components 
SAQA US ID UNIT STANDARD TITLE
8194  Dismantle components 
ORIGINATOR
SGB Grain 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Secondary Agriculture 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 1  NQF Level 01 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2005-04-13  2008-04-13  SAQA 0459/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2009-04-13   2012-04-13  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Dismantling components for repairs or reconditioning. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
Knowledge of O.H.S. Act
Literacy, numeracy and communication skills at or equivalent to NQF level 1.

Attended a course on:
Introduction to Industry.
Attachment agents
Lifting equipment.
Tools and equipment.

An understanding of General safety in the work place.
An understanding of supplier and customer relationships at NQF level 1. 

UNIT STANDARD RANGE 
The scope of this unit standard deals dismantling of electric/electronic, hydraulic, pneumatic and mechanical components related to agricultural machinery.
The specific outcomes as reflected in this unit standard are performed without direct supervision, but with access to work-site procedures and operating instructions and manufacturer's manuals.
Quality procedures include but are not limited to : ISO 9000 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
PLAN AND PREPARE FOR DISMANTLING OF COMPONENTS 
OUTCOME NOTES 
Reading and interpreting job instructions and determining a sequence of operation according to work site procedure.
Identifying, checking and selecting appropriate service tools and equipment according to job requirements.
Acquiring manufacturer's manuals and / or specifications according to job requirements.
Identifying and selecting appropriate personal protective equipment(PPE) and safety equipment according to statutory and jobrelated safety requirements.
Preparing work area and vehicle according to work site and manufacturer's procedures.
Liaising and informing affected parties according to work site procedures.
Adhering to supervisors instructions and assignments.
Determining a sequence of operation according to work-site procedures and statutory requirements. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Job instructions, oral or written, are accurately followed and adhered to 
ASSESSMENT CRITERION NOTES 
Reading and interpreting job instructions and determining a sequence of operation according to work site procedure.Identifying, checking and selecting appropriate service tools and equipment according to job requirements.Acquiring manufacturer's manuals and / or specifications according to job requirements.Identifying and selecting appropriate personal protective equipment(PPE) and safety equipment according to statutory and jobrelated safety requirements.Preparing work area and vehicle according to work site and manufacturer's procedures.Liaising and informing affected parties according to work site procedures.Adhering to supervisors instructions and assignments. Determining a sequence of operation according to work-site procedures and statutory requirements. 

ASSESSMENT CRITERION 2 
2. Purpose of determining a sequence of operation is explained. 

ASSESSMENT CRITERION 3 
3. All affected parties are informed of results, deviations and corrective actions taken. 

ASSESSMENT CRITERION 4 
4. Purpose of selecting and using appropriate tools and equipment is explained. 

ASSESSMENT CRITERION 5 
5. Reasons for adhering to safety and quality procedures. 

ASSESSMENT CRITERION 6 
6. Consequences of not selecting particular personal protective and safety equipment are explained. 

ASSESSMENT CRITERION 7 
7. Possible consequences of not preparing work area according work site procedures are explained. 

ASSESSMENT CRITERION 8 
8. Reasons for packing out component parts in sequence of dismantling according to work site and safety procedures. 

ASSESSMENT CRITERION 9 
9. Reasons for sorting out components parts according to ferrous and non-ferrous metals 

ASSESSMENT CRITERION 10 
10. Possible consequences of not inspecting and recording defect conditions are explained. 

ASSESSMENT CRITERION 11 
11. Reasons for the disposal of scrap material and storage of surplus material are explained. 

ASSESSMENT CRITERION 12 
12. Documentation and reports are completed. 

ASSESSMENT CRITERION 13 
13. Restoring work area according to work site procedures. 

SPECIFIC OUTCOME 2 
DISMANTLING COMPONENTS 
OUTCOME NOTES 
Dismantling components according to safety and manufacturer's procedure.
Using appropriate tools according to job requirements.
Packing out component parts in sequence of dismantling according to quality standards.
Inspecting components, recording and reporting defects according to work site procedures.
Sorting serviceable component parts according to ferrous and non-ferrous metals prior to cleaning parts.
Cleaning serviceable component parts according to manufacturer's, work-site and safety procedures.
Dismantling components according to manufacturer' procedures.
Storing serviceable component parts according to work site procedures. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Job instructions, oral or written, are accurately followed and adhered to 
ASSESSMENT CRITERION NOTES 
Dismantling components according to safety and manufacturer's procedure.Using appropriate tools according to job requirements.Packing out component parts in sequence of dismantling according to quality standards.Inspecting components, recording and reporting defects according to work site procedures.Sorting serviceable component parts according to ferrous and non-ferrous metals prior to cleaning parts.Cleaning serviceable component parts according to manufacturer's, work-site and safety procedures.Dismantling components according to manufacturer' procedures.Storing serviceable component parts according to work site procedures. 

ASSESSMENT CRITERION 2 
2. Purpose of determining a sequence of operation is explained. 

ASSESSMENT CRITERION 3 
3. All affected parties are informed of results, deviations and corrective actions taken. 

ASSESSMENT CRITERION 4 
4. Purpose of selecting and using appropriate tools and equipment is explained. 

ASSESSMENT CRITERION 5 
5. Reasons for adhering to safety and quality procedures. 

ASSESSMENT CRITERION 6 
6. Consequences of not selecting particular personal protective and safety equipment are explained. 

ASSESSMENT CRITERION 7 
7. Possible consequences of not preparing work area according work site procedures are explained. 

ASSESSMENT CRITERION 8 
8. Reasons for packing out component parts in sequence of dismantling according to work site and safety procedures. 

ASSESSMENT CRITERION 9 
9. Reasons for sorting out components parts according to ferrous and non-ferrous metals 

ASSESSMENT CRITERION 10 
10. Possible consequences of not inspecting and recording defect conditions are explained. 

ASSESSMENT CRITERION 11 
11. Reasons for the disposal of scrap material and storage of surplus material are explained. 

ASSESSMENT CRITERION 12 
12. Documentation and reports are completed. 

ASSESSMENT CRITERION 13 
13. Restoring work area according to work site procedures. 

SPECIFIC OUTCOME 3 
COMPLETE WORK ACTIVITY 
OUTCOME NOTES 
Restoring work site to safe and serviceable condition according to statutory requirements.
Disposing off of scrap material and storing surplus material according to statutory requirements and work site procedures.
Completing and returning reports and documents according to company procedure. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Job instructions, oral or written, are accurately followed and adhered to 
ASSESSMENT CRITERION NOTES 
Restoring work site to safe and serviceable condition according to statutory requirements.Disposing off of scrap material and storing surplus material according to statutory requirements and work site procedures. Completing and returning reports and documents according to company procedure. 

ASSESSMENT CRITERION 2 
2. Purpose of determining a sequence of operation is explained. 

ASSESSMENT CRITERION 3 
3. All affected parties are informed of results, deviations and corrective actions taken. 

ASSESSMENT CRITERION 4 
4. Purpose of selecting and using appropriate tools and equipment is explained. 

ASSESSMENT CRITERION 5 
5. Reasons for adhering to safety and quality procedures. 

ASSESSMENT CRITERION 6 
6. Consequences of not selecting particular personal protective and safety equipment are explained. 

ASSESSMENT CRITERION 7 
7. Possible consequences of not preparing work area according work site procedures are explained. 

ASSESSMENT CRITERION 8 
8. Reasons for packing out component parts in sequence of dismantling according to work site and safety procedures. 

ASSESSMENT CRITERION 9 
9. Reasons for sorting out components parts according to ferrous and non-ferrous metals 

ASSESSMENT CRITERION 10 
10. Possible consequences of not inspecting and recording defect conditions are explained. 

ASSESSMENT CRITERION 11 
11. Reasons for the disposal of scrap material and storage of surplus material are explained. 

ASSESSMENT CRITERION 12 
12. Documentation and reports are completed. 

ASSESSMENT CRITERION 13 
13. Restoring work area according to work site procedures. 


UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
An individual wishing to be assessed against this unit standard may apply to an assessor accredited by SETASA.
Any training provider offering learning that will enable achievement of this unit standard must be registered and accredited by SETASA.
Moderation of assessment will be done by SETASA in its ETQA capacity at its discretion. 

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
Basic knowledge of the safe handling of tools and equipment related to dismantling of components and parts.
Basic knowledge of methods of dismantling components.
Characteristics of ferrous and non-ferrous metals.
Basic knowledge and principles of special equipment related to dismantling of components. 


Critical Cross-field Outcomes (CCFO): 

UNIT STANDARD CCFO IDENTIFYING 
Identify and solve problems in the process of determining defects. 

UNIT STANDARD CCFO WORKING 
Work effectively with others while reporting to affected parties. 

UNIT STANDARD CCFO ORGANISING 
Organise and manage oneself when preparing the work area and determining a sequence of operation. 

UNIT STANDARD CCFO COLLECTING 
Collect, analyse, organise and critically evaluate information during the inspection of components and parts. 

UNIT STANDARD CCFO COMMUNICATING 
Communicate with others during the process of oral or written reporting. 

UNIT STANDARD CCFO SCIENCE 
Use science and technology when using equipment dismantle components. 

UNIT STANDARD CCFO DEMONSTRATING 
Understand the world as a set of related systems by recognising the effect of non-compliance to disposal methods. 

UNIT STANDARD NOTES 
Values:
  • An application of company ethics, values as well as general safety and customer care principles
  • An awareness of expectations and obligations of basic worker / management / customer relationships


    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes.

    In this unit standard the following specific criteria should be used:Job instructions, oral or written, are accurately followed and adhered to:

    Purpose of determining a sequence of operation is explained.
    All affected parties are informed of results, deviations and corrective actions taken.
    Purpose of selecting and using appropriate tools and equipment is explained.
    Reasons for adhering to safety and quality procedures.
    Consequences of not selecting particular personal protective and safety equipment are explained.
    Possible consequences of not preparing work area according work site procedures are explained.
    Reasons for packing out component parts in sequence of dismantling according to work site and safety procedures.
    Reasons for sorting out components parts according to ferrous and non-ferrous metals
    Possible consequences of not inspecting and recording defect conditions are explained.
    Reasons for the disposal of scrap material and storage of surplus material are explained.
    Documentation and reports are completed.
    Restoring work area according to work site procedures.Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  14891   National Certificate: Agricultural Machinery Technician  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2007-10-18  Was AgriSETA until Last Date for Achievement 
    Core  14892   National Certificate: Agricultural Machinery Technician  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2008-09-13  AgriSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. NWK Beperk 
    2. RCL Foods-Sugar & Milling (MP) 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.