SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Handle and maintain knives 
SAQA US ID UNIT STANDARD TITLE
7705  Handle and maintain knives 
ORIGINATOR
SGB Hospitality,Tourism,Travel, Leisure and Gaming 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 11 - Services Hospitality, Tourism, Travel, Gaming and Leisure 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  2 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2026-06-30   2029-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The learner will be able to handle and maintain knives safely according to correct procedures. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
None 

UNIT STANDARD RANGE 
Range statements are included with specific outcomes as necessary. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Sharpen and clean knives as well as the cutting surfaces in accordance with organisational requirements. 

ASSESSMENT CRITERIA 

ASSESSMENT CRITERION 1 
The reasons for keeping knives sharp and how a blunt knife can impact on safety and performance are explained. 

ASSESSMENT CRITERION 2 
Cutting surfaces are safely secured and checked that they are clean and ready for use. 

ASSESSMENT CRITERION 3 
Knives are cleaned and sharpened in an organised and efficient manner. 

SPECIFIC OUTCOME 2 
Handle knives in an organised and efficient manner in accordance with organisational requirements. 

ASSESSMENT CRITERIA 

ASSESSMENT CRITERION 1 
Procedures for handling knives are demonstrated, described and the safety aspects thereof explained. 

ASSESSMENT CRITERION 2 
The different knives within a full set of knives are identified and their purpose explained. 

ASSESSMENT CRITERION 3 
The correct knife for the task is selected and the importance of doing so explained. 

ASSESSMENT CRITERION 4 
The correct cutting technique is used to cut food items in an organised and efficient manner. 

ASSESSMENT CRITERION 5 
Unexpected problems associated with handling and maintaining knives are listed and reasons for decisions to solve these are described. 
ASSESSMENT CRITERION RANGE 
The range of unexpected problems is: Injury, blunt knife, broken knife and incorrect knife.
 


UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
1. Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.

2. Any institution offering learning that will enable achievement of this unit standard must be registered with the FE/HE Registrar.

3. Any institution wishing to receive skill development grants must be accredited with the relevant ETQA. Such an institution will also be registered with the relevant SETA.

4. Moderation of assessment will be done by the relevant ETQA at its discretion. 

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
Embedded knowledge and Critical cross-field outcomes have been included within the specific outcomes category.

This has been done as it was deemed necessary to ensure holistic assessment occurred.

The specific outcomes can be applied in a range of contexts.

Many of the outcomes have been written in such a way that competence must be demonstrated in the context as opposed to in isolation from a context.

The specific outcomes are comparable to outcomes used internationally.

We therefore structured outcomes using the format noun + verb + condition (modifying phrase)Specific outcomes
have been split into three categoriesa) knowledge and understanding (what the learner must know and understand)b) decision-making and acting (what the learner must do)c) adapting performance ( including reflexive competence)In many instances there are more than six specific outcomes, as the inclusion of critical cross-field outcomes and embedded knowledge has increased the number of specific outcomes.

If competencies are to be clustered in a meaningful way, then these unit standards cannot be split. 


Critical Cross-field Outcomes (CCFO): 

UNIT STANDARD CCFO IDENTIFYING 
Identify and solve problems (Specific Outcome 9,11) 

UNIT STANDARD CCFO CONTRIBUTING 
Personal development - Participate as a responsible citizen (Specific Outcome 1,2,6,7) 

REREGISTRATION HISTORY 
As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

UNIT STANDARD NOTES 
Essential embedded knowledge is dealt with under the specific outcomes section where "demonstrated KNOWLEDGE and UNDERSTANDING" is required.

Recommendations and Exemplars for the design of:

Learning/Curriculum
  • Practice identifying and using the different types of knives
  • Practice cleaning and sharpening knives.
  • Learn the safety procedures that are applicable when using knives.

    Performance systems
  • A new employee should be able to achieve this unit within 1 month of being trained.
  • Ongoing measurement of the learner's ability to meet this standard is recommended. 
    		•

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  14111   National Certificate: Professional Cookery  Level 4  Level TBA: Pre-2009 was L4  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  CATHSSETA 
    Core  14109   National Diploma: Fast Food Services  Level 5  NQF Level 05  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  CATHSSETA 
    Core  61596   National Diploma: Food and Beverage Management  Level 5  NQF Level 05  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  As per Learning Programmes recorded against this Qual 
    Core  14112   National Diploma: Professional Cookery  Level 5  NQF Level 05  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  CATHSSETA 
    Elective  14115   National Certificate: Fast Food Services  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  CATHSSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. NDIKHOYA DINALEDI SERVICES 
    2. THANSA TRADING (PTY)LTD 
    3. Tlou K Wildlife Safaris and Training Academy (Pty) LtD 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.