SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Glaze steel and wood 
SAQA US ID UNIT STANDARD TITLE
262686  Glaze steel and wood 
ORIGINATOR
SGB Building Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Building Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  10 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Learners accredited with this standard will be able to glaze steel and wood after preparing for it. Learners will become acquainted with the various steel and wood frames. Learners will work safely and complete the glazing on-site in most cases. It is assumed that the steel/wooden structure is already in place before it is glazed.

Learners credited with this standard will be able to:
  • Confirm job/customer requirements for glazing of wood/steel.
  • Prepare to glaze steel and wood.
  • Glaze steel/wood. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
  • Communication at NQF Level 1.
  • Mathematical Literacy at NQF Level 1.
  • Unit Standard entitled: 'Handle, cut and process glass'. 

  • UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Confirm job/customer requirements for glazing of wood/steel. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Opening sizes are measured/re-measured on site to confirm measurements prior to starting work. 

    ASSESSMENT CRITERION 2 
    Customer requirements/preferences are confirmed prior to glazing the system. 
    ASSESSMENT CRITERION RANGE 
    Requirements and preferences include but are not limited to type of glass, specific installation arrangements.
     

    ASSESSMENT CRITERION 3 
    Building regulations and SANS standards are checked to ensure safety of the proposed glazing. 
    ASSESSMENT CRITERION RANGE 
    Conformity to SANS codes include SANS 10137 and in conjunction with 10400 which is Regulation Part N 2006 Edition 3 and regulations of the Association of Architectural Aluminium Manufacturers of South Africa (AAAMSA).
     

    ASSESSMENT CRITERION 4 
    All safety requirements are complied with in the preparation phase and glazing phase. 
    ASSESSMENT CRITERION RANGE 
    Safety requirements include the correct use of personal protective clothing.
     

    ASSESSMENT CRITERION 5 
    Windload limitations are calculated as per the system to be installed. 

    SPECIFIC OUTCOME 2 
    Prepare to replace and glaze steel/wood. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The glass is measured and cut according to size and thickness. 
    ASSESSMENT CRITERION RANGE 
    Cutting excludes 10mm glass and laminates.
     

    ASSESSMENT CRITERION 2 
    The glass is polished to ensure that it is fit for glazing purposes. 

    ASSESSMENT CRITERION 3 
    Existing or damaged glass and putty is removed and the surface is prepared as per procedure. 

    ASSESSMENT CRITERION 4 
    Preparation is completed according to manufacturer's instruction. 
    ASSESSMENT CRITERION RANGE 
    Includes but is not limited to the preparation of putty, and use of material to remove rust.
     

    SPECIFIC OUTCOME 3 
    Glaze steel/wood. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Personal protective clothing is used during glazing. 

    ASSESSMENT CRITERION 2 
    Glazing is performed according to procedure pertaining to wood and steel. 

    ASSESSMENT CRITERION 3 
    Appropriate beading is used in case of installation on wood. 

    ASSESSMENT CRITERION 4 
    Tools are selected and used to glaze steel/wood as per requirements. 

    ASSESSMENT CRITERION 5 
    Scaffolding/harness is used to perform the installation if required. 

    ASSESSMENT CRITERION 6 
    The installation is checked as per procedure to ensure quality workmanship. 

    ASSESSMENT CRITERION 7 
    The glass and the customer's premises are cleaned and maintained to ensure customer satisfaction and service. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQA policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments at exit points of the qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual unit standards as well as the integrated competence described in the qualification. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Knowledge of measurements.
  • Knowledge of glazing procedures.
  • Knowledge of safety standards.
  • Knowledge of building regulations and SANS standards. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems in which responses display that responsible decisions using critical and creative thinking have been made when:
  • Solving problems related to measurements glazing. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organisation, community to:
  • Take/calculate the correct measurements.
  • Ensure safe and correct glazing. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one's activities responsively and effectively when:
  • Taking and check correct measurements.
  • Negotiate and sign appropriate contract with the customer based on customer requirements and preferences.
  • Use appropriate tools and equipment.
  • Glazing as per system requirements.
  • Maintain customer satisfaction. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information to:
  • Satisfy customer requirements.
  • Solve problems. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively using visual, mathematical and/or language skills in the modes of oral and/or written presentation to:
  • Ensure knowledge of customer requirements.
  • Correct glazing. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically, showing responsibility towards the environment and the health of others by:
  • Using the equipment according to manufacturer's instructions. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that the problem-solving contexts do not exist in isolation when engaging with problems during the different phases of the installation process. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  65769   National Certificate: Glazing  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.