SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Create jewellery utilising Perspex and non-precious metals 
SAQA US ID UNIT STANDARD TITLE
261455  Create jewellery utilising Perspex and non-precious metals 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to people who are required to create jewellery utilizing Perspex and non-precious metals.

People credited with this unit standard are able to:
  • Plan the manufacturing process for the jewellery pieces.
  • Prepare the components for manufacture.
  • Assemble the components.
  • Finish the jewellery pieces. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are already competent in:
  • Communication and Mathematical Literacy at NQF Level 2. 

  • UNIT STANDARD RANGE 
    The following range applies to this unit standard:
  • All three of the following ranges of jewellery categories must be selected:
    > Earrings.
    > Pendant.
    > Bangle. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Plan the manufacturing process for the jewellery pieces. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The design for the jewellery pieces is analysed and interpreted in terms of the specified requirements. 
    ASSESSMENT CRITERION RANGE 
    The forms of the designs must include at least one of the following:
  • A drawing.
  • A photograph.
    OR
  • A model.
     

  • ASSESSMENT CRITERION 2 
    The tools, Perspex, other materials and equipment needed in the manufacturing process are identified and selected in accordance with the production requirements. 

    ASSESSMENT CRITERION 3 
    The metal is weighed and the cost calculated in accordance with relevant material prices. 

    ASSESSMENT CRITERION 4 
    Occupational hazards and risks are identified and dealt with in accordance with specified requirements. 

    ASSESSMENT CRITERION 5 
    Housekeeping and safe working practices are adhered to and demonstrated in accordance with occupational health and safety requirements. 

    ASSESSMENT CRITERION 6 
    The consequences of not adhering to correct preparation, housekeeping and safety practices are described in terms of the potential impact on occupational health and safety, productivity and quality. 

    SPECIFIC OUTCOME 2 
    Prepare the components for the manufacture of the jewellery pieces. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Tools, material and equipment are selected and prepared for the preparation of the Perspex and metal components to make the jewellery pieces in accordance with the given requirements. 

    ASSESSMENT CRITERION 2 
    The metal is prepared to specified requirements. 

    ASSESSMENT CRITERION 3 
    The components for the jewellery pieces are prepared to design specifications. 

    ASSESSMENT CRITERION 4 
    Work is conducted in accordance with agreed timeframes. 

    ASSESSMENT CRITERION 5 
    The consequences of not adhering to the correct preparation, housekeeping and safety practices, are described in terms of the potential impact on occupational health and safety, productivity and quality. 

    SPECIFIC OUTCOME 3 
    Assemble the components. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Tools, material and equipment are selected and prepared to assemble the Perspex and metal components in accordance with the specified requirements. 

    ASSESSMENT CRITERION 2 
    The tools and equipment are used in terms of its design and manufacturers specifications. 

    ASSESSMENT CRITERION 3 
    The components are assembled to design specifications within an agreed timeframe. 

    ASSESSMENT CRITERION 4 
    The consequences of not adhering to correct workmanship, housekeeping and safety practices, are described in terms of the potential impact on occupational health and safety, productivity and quality. 

    SPECIFIC OUTCOME 4 
    Finish the jewellery pieces. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Tools, material and equipment are selected and prepared in accordance with the specified requirements. 

    ASSESSMENT CRITERION 2 
    The jewellery pieces are given the desired surface finish according to specified requirements. 

    ASSESSMENT CRITERION 3 
    The fastening mechanisms are attached in terms of the specified requirements. 

    ASSESSMENT CRITERION 4 
    The consequences of applying the wrong finish, and thus deviating from the design specifications, are described in terms of the potential impact on customer satisfaction and cost. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and. moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and. guidelines for assessment and. moderation.
  • Moderation must include both internal and. external moderation of assessments, unless ETQA policies specify otherwise.
  • Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge is addressed in an integrated way in the unit standard:

    Knowledge relating to creating jewellery using perspex and non precious metals:
  • Knowledge of the malleability of the metal.
  • Knowledge of working with Perspex.
  • Three-dimensional spatial perception and developed hand eye co-ordination.

    Processes and events:
  • Knowledge of various jewellery manufacturing processes.
  • Exposure to various jewellery manufacturing processes.
  • Distinguish poor jewellery manufacturing quality from acceptable quality.

    Causes and effects (Safety and Health):
  • Use of equipment.
  • Use of personal protective equipment.
  • Adherence to safety requirements.
  • Work related hazards and associated risks.

    Regulations, legislation, agreements, policies and standards:
  • Safety, health and environmental legislation and regulations.
  • Quality policies, standards and agreements. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking.
  • Note: The ability of the learner to select the correct and relevant tools, materials and equipment for the manufacture of different jewellery pieces, and to plan the manufacturing process very carefully and logically. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as members of a team, group, organisation or community.
  • Note: The ability and willingness of the learner to accept and interpret the specified requirements correctly. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively.
  • Note: The ability of the learner to indicate which tools, equipment and procedures are required for the manufacturing process of these different jewellery pieces. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.
  • Note: The ability of the learner to plan the layout, the procedure, the preparation, the assembly and the specified finish gathered from the information from the design specifications with the specified requirements. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations.
  • Note: The ability of the learner to interpret specified requirements by liaising and interacting with relevant role players in the production process, using appropriate and effective communication methods. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others.
  • Note: The ability to use the relevant technology applying the required occupational health and safety measures to conduct the required manufacturing task in an agreed time frame. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.
  • Note: The ability of the learner to identify the relevant factors that contribute to the success or failure of the manufactured jewellery pieces-the quality of the metal before use, the preparation thereof, the correct interpretation of the design and what it hopes to achieve in the rest of the jewellery production process, and as a whole, within the rest of the jewellery industry. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Specified Requirements:

    Specified requirements include legal and workplace specific requirements and are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health & Safety Act, 1996 (Act no 29/1996), and Minerals Act and Regulations, 1991 (Act no 50/1991).
  • Regulations.
  • Mandatory Codes of Practice.
  • SANS and other Standards.

    Site Specific:
  • Hazard Identification and Risk Assessment (HIRA).
  • Occupational Health and Safety Risk Management Programme.
  • Voluntary Codes of Practices.
  • Managerial Instructions.
  • Mine Standard Procedures.
  • List of Recorded OH&S Risks.

    Jewellery Industry Requirements:
  • Working Guides.
  • User manuals supplied by equipment manufacturer.
  • The Bargaining Council for the Jewellery and Precious Metals Industry Main Agreement.
  • The employer's work specifications, tariff agreements and policies and Procedures.
  • Regulations as per directives from the Gold and Diamond Branch of the Southern African Police.
  • ISO 9000/1, SANS and other accredited standards and quality assurance measures.
  • A glossary of terms regarding the terminology of the Jewellery Industry. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  65209   National Certificate: Jewellery Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.