SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Monitor and control the preparation and supply of bagasse 
SAQA US ID UNIT STANDARD TITLE
256285  Monitor and control the preparation and supply of bagasse 
ORIGINATOR
SGB Pulp and Paper 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Engineering and Related Design 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  4 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
246620  Prepare and supply bagasse  Level 2  NQF Level 02  4   
13689  Prepare and supply bagasse  Level 3  NQF Level 03  14   

PURPOSE OF THE UNIT STANDARD 
Learners who demonstrate competence as described in the outcomes of this unit standard will be able to monitor and control the production process from raw bagasse to storage of clean bagasse.

The qualifying learner is able to:
  • Explain the fundamental principles applicable to the preparation and supply of bagasse.
  • Monitor and control the different ancillary systems interacting with the bagasse preparation and supply process.
  • Monitor and control the quality standards of process materials in the preparation and supply of bagasse.
  • Monitor and control the preparation and supply of bagasse.

    > Note: The impact of the bagasse preparation and supply process is measured at various stages later in the process and feedback is required for necessary control. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Learners accessing this unit standard will have demonstrated competence against communication and mathematical literacy at NQF Level 1, ABET Level 4 or equivalent. 

    UNIT STANDARD RANGE 
  • The typical context of this unit standard covers the process from raw bagasse to storage of clean bagasse.
  • Range statements, which are applicable to the unit standard titles, specific outcomes and assessment criteria are found beneath the applicable assessment criteria. 
    		•

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Explain the fundamental principles applicable to the preparation and supply of bagasse. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The purpose of the preparation and supply of bagasse is explained in terms of the final product manufactured. 

    ASSESSMENT CRITERION 2 
    The principles of the bagasse preparation and supply process are explained by making use of a generic flow diagram. 

    ASSESSMENT CRITERION 3 
    The bagasse preparation and supply process is explained in relation to its supplier's- and customer's processes. 

    ASSESSMENT CRITERION 4 
    The flow of material through the bagasse preparation and supply section is traced and all equipment is identified using standard industry terminology. 

    ASSESSMENT CRITERION 5 
    The purpose and functioning of each piece of equipment used in the bagasse preparation and supply section is explained in terms of its role in the overall process. 
    ASSESSMENT CRITERION RANGE 
    Equipment includes vibrator screens, depithers, rock cyclone and fibre washer where applicable.
     

    ASSESSMENT CRITERION 6 
    The functions of all chemicals and additives used within the process are explained in terms of their chemical and physical properties. 

    SPECIFIC OUTCOME 2 
    Monitor and control the different ancillary systems interacting with the bagasse preparation and supply process. 
    OUTCOME RANGE 
    Ancillary systems refer to the interface between mechanical equipment, electrical equipment, instrumentation and utilities and the bagasse preparation and supply process. It only includes those parts of each ancillary system which interact directly with the bagasse preparation and supply process and not the full ancillary system. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Mechanical equipment used in the bagasse preparation and supply process is identified and described in terms of purpose and application. 
    ASSESSMENT CRITERION RANGE 
    Mechanical equipment may include bulk handling equipment, conveying equipment, weighing equipment, storage equipment, transport equipment and packaging equipment.
     

    ASSESSMENT CRITERION 2 
    Electrical equipment used in the bagasse preparation and supply process is identified and described in terms of purpose and application. 
    ASSESSMENT CRITERION RANGE 
    Electrical equipment may include electrical motors, switchgear and drive equipment.
     

    ASSESSMENT CRITERION 3 
    Instrumentation used in the bagasse preparation and supply process is identified and described in terms of purpose and application. 
    ASSESSMENT CRITERION RANGE 
    Instrumentation includes the key process indicators, control valves and controllers used to monitor and control the process.
     

    ASSESSMENT CRITERION 4 
    Utilities used in the bagasse preparation and supply process are identified and described in terms of purpose and application. 
    ASSESSMENT CRITERION RANGE 
    Utilities may include air, steam, electricity and cooling water.
     

    ASSESSMENT CRITERION 5 
    Typical ancillary equipment problems within the bagasse preparation and supply process are discussed and solutions offered in accordance with workplace procedures. 

    ASSESSMENT CRITERION 6 
    Ancillary systems are monitored and any deviations from operating parameters are corrected in accordance with operating procedures. 

    SPECIFIC OUTCOME 3 
    Monitor and control the quality standards of process materials in the preparation and supply of bagasse. 
    OUTCOME RANGE 
    Process materials include all raw materials, products, chemicals and any additives forming part of the bagasse preparation and supply process. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The properties of process materials are explained in terms of key characteristics. 

    ASSESSMENT CRITERION 2 
    The purpose of process material quality control procedures as well as the consequences of not adhering to these procedures are explained with regards to the impact thereof on the final product produced. 

    ASSESSMENT CRITERION 3 
    The quality requirements of raw materials, chemicals and additives are explained according to general and workplace specifications. 

    ASSESSMENT CRITERION 4 
    Typical raw material problems and its impact on pulp properties and costs are discussed in terms of the purpose of the process. 

    ASSESSMENT CRITERION 5 
    Corrective action to be taken in the case of non-conforming raw materials is discussed in accordance with workplace procedures. 

    ASSESSMENT CRITERION 6 
    Product variations are evaluated and corrective action taken in accordance with workplace procedures. 
    ASSESSMENT CRITERION RANGE 
  • "Product" refers to the clean bagasse.
  • "Variations" include but are not limited to clean fibre, moisture, consistency, pith removal and ash.
     
    		•

    SPECIFIC OUTCOME 4 
    Monitor and control the preparation and supply of bagasse. 
    OUTCOME NOTES 
    The monitoring and controlling of the bagasse preparation and supply process should be performed according to operational requirements and standard operating procedures. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The bagasse preparation and supply process is monitored and parameters recorded in accordance with workplace procedures. 

    ASSESSMENT CRITERION 2 
    The impact of process variables on the product properties is explained in terms of final products and costs. 
    ASSESSMENT CRITERION RANGE 
    Process variables include but are not limited to power consumption, depither conditions, vibrator condition, process flows and production rate.
     

    ASSESSMENT CRITERION 3 
    Typical equipment problems within the bagasse preparation and supply process are discussed and solutions offered in accordance to workplace procedures. 

    ASSESSMENT CRITERION 4 
    Variations in the product are evaluated and corrective action taken in accordance with workplace procedures. 
    ASSESSMENT CRITERION RANGE 
    Product deviations include but are not limited to cleanliness of fibre, moisture levels, consistency, pith removal and remaining ash.
     


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An assessor, accredited with a relevant NQF Level 2 or higher qualification, will assess the learner's competency.
  • Only an Assessor with considerable first hand experience in process operations will assess the learner's competency.
  • Anyone assessing a learner or moderating the assessment of a learner against this Unit Standard must be registered as an Assessor with the relevant ETQA.
  • Direct observation in simulated or actual work conditions is required. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Qualifying learners understand and can:

    Explain the names, functions and locations of:
  • All items of installed equipment:
  • Raw material/s.
  • Finished product/s.

    Describe the properties and characteristics of:
  • Raw material/s.
  • Product/s.
  • Process equipment.
  • Process system/s.

    Explain the purpose of the:
  • Process, in terms of product/s, efficiencies and quality.

    Explain the causes, effects and implications of:
  • Process variables.
  • Raw material variables (suppliers).
  • Product variables (customers).
  • Hazards.
  • Not complying with safety standards.
  • Not complying with standard operating procedures.
  • Not complying with quality specifications.

    Demonstrate procedures and techniques of:
  • Standard Operating for the starting up, monitoring, controlling and shutting down of the process.
  • Recording and reporting data.

    Explain the regulations, legislation, agreements and policies related to:
  • Occupational Health and Safety Act.
  • Environmental issues.
  • Housekeeping.
  • Company Safety Procedures.
  • Standard Operating procedures.
  • Quality specifications. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    The learner is able to identify and solve problems in which responses display that responsible decisions, using critical and creative thinking, have been made by:
  • Identifying and addressing variations in ancillary system operation.
  • Identifying and addressing variations in material quality.
  • Identifying and addressing variations in the bagasse preparation and supply process.
  • Bringing all deviations into control.

    Refer to the following Specific Outcomes:
  • Monitor and control the different ancillary systems interacting with the bagasse preparation and supply process.
  • Monitor and control the quality standards of process materials in the preparation and supply of bagasse.
  • Monitor and control the preparation and supply of bagasse. 
    		•

    UNIT STANDARD CCFO WORKING 
    The learner is able to work effectively with others as a member of a team, group, organisation or community by:
  • Maintaining sound relations with co-workers.
  • Explaining the relationship of this functional area in relation to the supplier and customer's processes.

    Refer to the following Specific Outcomes:
  • Monitor and control the quality standards of process materials in the preparation and supply of bagasse.
  • Monitor and control the preparation and supply of bagasse. 
    		•

    UNIT STANDARD CCFO ORGANISING 
    The learner is able to organise and manage himself and his activities responsibly and effectively by:
  • Tracing the flow of material through the bagasse receipt and storage section.
  • Explaining the quality requirements of raw materials according to quality specifications.
  • Handling non-conforming raw materials in accordance with workplace procedures.

    Refer to the following Specific Outcomes:
  • Explain the fundamental principles applicable to the preparation and supply of bagasse.
  • Monitor and control the different ancillary systems interacting with the bagasse preparation and supply process.
  • Monitor and control the preparation and supply of bagasse. 
    		•

    UNIT STANDARD CCFO COLLECTING 
    The learner is able to collect, analyse, organise and critically evaluate information by:
  • Describing the relationship of the process to suppliers, customers and the overall pulping process.
  • Explaining the impact of non-conforming bagasse in terms of final products and costs.
  • Carrying out physical quality checks and tests.
  • Evaluating variations in the product and taking corrective action in accordance with workplace procedures.

    Refer to all Specific Outcomes. 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    The learner is able to communicate effectively by using mathematical and/or language skills in the modes of oral and/or written presentations during:
  • Using standard industry terminology.
  • Drawing and interpreting diagrams and sketches.
  • Completing relevant documentation and log sheets in accordance with workplace requirements.

    Refer to all Specific Outcomes. 
    		•

    UNIT STANDARD CCFO SCIENCE 
    The learner is able to use science and technology effectively and critically, showing responsibility towards the environment and health of others by:
  • Monitoring the process.
  • Bringing process, product and equipment variables into control.

    Refer to the following Specific Outcomes:
  • Monitor and control the quality standards of process materials in the preparation and supply of bagasse.
  • Monitor and control the preparation and supply of bagasse. 
    		•

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by:
  • Explaining the purpose of the process as well as the relationship to the supplier and customer's processes.

    Refer to all Specific Outcomes. 
    		•

    UNIT STANDARD CCFO CONTRIBUTING 
    Contribute to the full personal development of each learner and the social and economic development of the society at large by:
  • Understanding the role of preparing and supplying bagasse and the effect it has on the growth and development of the organisation, its customers and employees.

    Refer to all Specific Outcomes. 
    		•

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 13689, "Prepare and supply bagasse", Level 2, 14 credits. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  61929   National Certificate: Pulp and Paper Operations  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. VEB CELE & ASSOCIATES PTY LTD 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.