SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Transfer material by means of a belt conveyor 
SAQA US ID UNIT STANDARD TITLE
252324  Transfer material by means of a belt conveyor 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  4 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for persons responsible for transferring material by means of a belt conveyor.

A person credited with this unit standard can:
  • Demonstrate knowledge relating to the transfer of material.
  • Prepare to transfer material.
  • Transfer material.
  • Complete duties pertaining to the material transfer process. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Communication and mathematical literacy at NQF Level 1. 

    UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge relating to the transfer of material. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The actions and conditions pertaining to a safe, healthy work environment in the material transfer process and the consequences on non-adherence are explained in terms of specified requirements. 

    ASSESSMENT CRITERION 2 
    The importance of transferring material by means of a belt conveyor is explained in terms of achieving production requirements and up-and-down stream operational requirements. 

    ASSESSMENT CRITERION 3 
    Hazards and associated risks are identified in terms of the relevant risk assessment procedures. 

    ASSESSMENT CRITERION 4 
    The actions to be taken should hazards and risks be encountered are explained in terms of specified requirements. 

    ASSESSMENT CRITERION 5 
    The principal components of the belt conveyor are identified and their functions explained in terms of manufacturers design and operational requirements. 
    ASSESSMENT CRITERION RANGE 
    Principal components must include:
  • Conveyor components.
  • Auxiliary systems.
  • Safety devices.
  • Interlock systems.
     
    		•

    ASSESSMENT CRITERION 6 
    Lock-out procedures pertaining to the belt conveyor and the consequences of non-compliance are explained in terms of legal and operational requirements. 

    ASSESSMENT CRITERION 7 
    The actions to be taken, should sub-standard conditions and problems pertaining to material transfer be encountered, are explained in terms of legal and operational requirements. 

    ASSESSMENT CRITERION 8 
    The communication requirements pertaining to the belt conveyor operation and the consequences of non-compliance are explained in terms of legal and operational requirements. 

    ASSESSMENT CRITERION 9 
    The operating parameters and control methods and the consequences of not adhering to these are explained in terms of operational requirements. 

    ASSESSMENT CRITERION 10 
    The factors affecting the optimum performance of the belt conveyor are explained in terms of manufacturers design and operational requirements. 

    SPECIFIC OUTCOME 2 
    Prepare to transfer material. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Personal protective and safety equipment is verified, examined and used in accordance with prescribed practices. 

    ASSESSMENT CRITERION 2 
    Tools and equipment are verified and examined in accordance with prescribed practices. 

    ASSESSMENT CRITERION 3 
    Workplace hazards and associated risks are dealt with in accordance with recommendations set out in the applicable risk assessment. 

    ASSESSMENT CRITERION 4 
    The belt conveyor is examined and substandard conditions are dealt with in accordance with operational requirements. 

    ASSESSMENT CRITERION 5 
    Specified security requirements pertaining to the belt conveyor are explained and met. 

    ASSESSMENT CRITERION 6 
    Safety and health procedures towards self and others are maintained in terms of legal and operational requirements. 

    SPECIFIC OUTCOME 3 
    Transfer material. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Personal protective and safety equipment is used in accordance with prescribed practices. 

    ASSESSMENT CRITERION 2 
    The start-up of the belt conveyor is in accordance with standard task procedures. 

    ASSESSMENT CRITERION 3 
    Material transfer is started and controlled in accordance with standard task procedures. 

    ASSESSMENT CRITERION 4 
    Safe and optimum production is ensured through effective communication in accordance with operational requirements. 

    ASSESSMENT CRITERION 5 
    Tools and equipment are used in accordance with prescribed practices. 

    ASSESSMENT CRITERION 6 
    Work related hazards and associated risks are dealt with in accordance with risk assessment procedures. 

    ASSESSMENT CRITERION 7 
    Security requirements pertaining to the belt conveyor are met in accordance with operational requirements. 

    ASSESSMENT CRITERION 8 
    Problems encountered are dealt with in accordance with specified requirements. 

    ASSESSMENT CRITERION 9 
    Operation of the belt conveyor is consistent with environmental policy and other legislation. 

    ASSESSMENT CRITERION 10 
    Safety and health procedures towards self and others are maintained in accordance with plant policy. 

    SPECIFIC OUTCOME 4 
    Complete duties pertaining to the material transfer process. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The material transfer and belt conveyor is stopped in accordance with standard task procedures. 

    ASSESSMENT CRITERION 2 
    Personal protective and safety equipment is dealt with in accordance with prescribed practices. 

    ASSESSMENT CRITERION 3 
    Tools and equipment are dealt with in accordance with prescribed practices. 

    ASSESSMENT CRITERION 4 
    Security requirements pertaining to the belt conveyor are met in accordance with operational requirements. 

    ASSESSMENT CRITERION 5 
    Good housekeeping practices are maintained in accordance with plant policy. 

    ASSESSMENT CRITERION 6 
    Reporting and data-recording requirements are met in accordance with legal and operational requirements. 

    ASSESSMENT CRITERION 7 
    Preparation for maintenance is conducted in accordance with plant instructions and lock-out procedures. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against the qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the associated unit standards.
  • Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge will be assessed in an integrated way in the context of the unit standard.

    Critical factors relating to transferring material by means of a belt conveyor:
  • Legal and specified requirements.
  • Achieving specified production requirements.
  • Risk Assessment procedures and actions.
  • Identify the principal components and explain the specification and their functions.
  • Specified communication requirements.
  • Elementary principles of the process.

    Processes and Events:
  • Preparation.
  • Examination.
  • Metal recovery.
  • Monitor and control.

    Causes and Effects (Safety and Health):
  • Use of personal protective equipment.
  • Use of tools and equipment.
  • Workplace hazards and associated risks.
  • Housekeeping.

    Procedures and Techniques:
  • Methods of collecting, analysing, organising, summarising and presenting data.
  • Fault finding and corrective techniques.
  • Handling procedure and controls.

    Regulations, Legislation, Agreements, Policies and Standards:
  • Safety, health and environmental legislation and regulations.
  • Quality policies, standards and agreements. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking.

    Note:
  • The ability of the candidate to identify substandard and hazardous conditions, assess and take appropriate action. 
    		•

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organisation or community.

    Note:
  • The ability and willingness of the candidate to accept and interpret work instructions correctly. 
    		•

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage himself/herself and his/her activities responsibly and effectively.

    Note:
  • The ability of the candidate to indicate what methods, tools and personal protective equipment are required, and to communicate to fellow workers his/her intentions and the assistance required. 
    		•

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.

    Note:
  • The ability of the candidate to reconcile the information from visual and physical examinations and constantly evaluate the changing situation. 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations.

    Note:
  • The appropriate communication with the relevant personnel with regard to the reporting of hazards and substandard conditions will indicate his/her proficiency in effective communication. 
    		•

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.

    Note:
  • The ability of the candidate to identify and refer anomalous behaviour to a specialist confirms his/her understanding of the fact that a specific observation, inference, action or decision may have a devastating effect. 
    		•

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 9737, "Transfer material by means of a belt conveyor", Level 2, 3 credits.

    Terminology:

    Specified Requirements:

    Specified requirements include legal and site specific requirements and are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health & Safety Act, 1996 (Act no 29/1996), and Minerals Act and Regulations, 1991 (Act no 50/1991).
  • Mandatory Codes of Practice.
  • SANS and other relevant Standards.
  • Chief Inspector of Mines' Directives.

    Site Specific:
  • Hazard Identification and Risk Assessments (HIRA).
  • Occupational Health and Safety Risk Management Programme.
  • Managerial Instructions.
  • Mine Standard Procedures.
  • List of Recorded OH&S Risks.
  • Working Guides.
  • Equipment and Materials Specifications.

    Unit Standard Justification:

    Level:

    Attribute; NQF Level; Justification:

    Skills; NQF Level 2; Moderate in range.
    Procedures; NQF Level 2; Established and familiar.
    Context; NQF Level 2; Routine and familiar.
    Knowledge; NQF Level 2; Basic operational.
    Information processing; NQF Level 2; Basic processing of readily available information.
    Problem Solving; NQF Level 2; Known solutions to familiar problems.
    Orientation of activities; NQF Level 2; Directed.
    Application of responsibility; NQF Level 2; Under general supervision and quality control.
    Orientation of scope of responsibility; NQF Level 2; Some responsibility for quantity and quality and possible responsibility for guiding others.

    Average Level: 2.00.
    Actual Level Assigned: 2.

    Credits:

    Total hours required by the learner to achieve the required outcome:

    Activity; Hours:
  • Classroom Teaching; 20 Hours.
  • On-The-Job Training; 20 Hours.
  • Mentoring required; 0.
  • Other (Specify); 0.

    Total; 40 Hours.

    Credits Achieved: 40/10 = 4. 
    		•

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  59305   National Certificate: Mineral Processing  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. ADCORP TECHNICAL TRAINING (PTY) LTD 
    2. ALLOYS HEAD OFFICE 
    3. AMC TRAINING CENTRE 
    4. Anglo American Platinum Amendelbult Concentrators 
    5. Anglo American Platinum Limited 
    6. ASSMANG (PTY) LTD 
    7. ASSMANG BEESHOEK MINE 
    8. BAFOKENG RASIMONE MANAGEMENT SERVICES PTY LTD 
    9. COLLIERY TRAINING COLLEGE (PTY) LTD 
    10. EASTERN CHROME MINES SAMANCOR 
    11. EKAPA MINERALS (PTY) LTD 
    12. ERGO BUSINESS DEVELOPMENT ACADEMY NPC 
    13. EXXARO COAL (PTY) LTD 
    14. FINSCH DIAMOND MINE(PTY) LTD 
    15. FOSKOR (PTY) LTD 
    16. HOTAZEL MANGANESE MINES (PTY) LTD 
    17. IMPALA PLATINUM SERVICES LTD 
    18. KABELANO TRAINING SOLUTIONS (PTY) LTD 
    19. KOLOMELA MINE 
    20. KUMBA IRON ORE (SISHEN) 
    21. Kumba Sishen HRD Centre 
    22. LAFARGE SOUTH AFRICA 
    23. METSKILL PTY LTD 
    24. MODIKWA MINING PERSONNEL SERVICES PTY L TD 
    25. OPSMIN TRAINING SERVICES SA (PTY) LTD 
    26. PALABORA COPPER (PTY) LTD 
    27. PROGRESSIVE TRAINING DEVELOPMENT AND PROJECTS (PTY) LTD 
    28. RICHARDS BAY MINING PTY LTD 
    29. SASOL GLOBAL LEARNING 
    30. SIBANYE GOLD ACADEMY PROPRIETARY LIMITED 
    31. THARISA MINERALS (PTY) LTD 
    32. TOP PERFORMERS FOR AFRICA CC 
    33. TOTAL COVERAGE CONSULTING 
    34. WESTERN CHROME MINES 
    35. XTRACT TRAINING SERVICES (SA)(PTY)LTD 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.