SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Overhaul minor drive train components on agricultural equipment 
SAQA US ID UNIT STANDARD TITLE
246765  Overhaul minor drive train components on agricultural equipment 
ORIGINATOR
SGB Secondary Agriculture: Processing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Secondary Agriculture 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  4 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The qualifying learner achieving this unit standard will be able to overhaul minor drive train components on agricultural equipment. This competence will enable the learner to:
  • Prepare to overhaul a minor drive train component.
  • Disassemble the minor drive train component.
  • Identify malfunctioning or worn parts and secure the correct replacement parts.
  • Reassemble the minor drive train component.
  • Keep the workplace safe and productive.

    This will ensure that minor drive train components on agricultural equipment are overhauled in accordance with manufacturer specifications and safe work practices. This competence will enhance the learner's employability and career options in all occupations where the occupant must know how to overhaul minor drive train components on equipment. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    This unit standard has been designed as an introduction to the overhaul of minor drive train components on agricultural equipment and does not assume prior learning or experience. The unit standard outcomes and credits are based on the assumption that learners attempting this Unit Standard have demonstrated competence against numeracy and literacy at NQF Level 1. 

    UNIT STANDARD RANGE 
    Minor drive train components that are overhauled includes but is not limited to:
  • Final drive.
  • Clutch.
  • Transfer box.
  • Power take off assembly.
  • Planetary drives.
  • Belt and chain drives. 
    		•

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Prepare to overhaul a minor drive train component. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The execution of the task is planned in accordance with job instructions. 

    ASSESSMENT CRITERION 2 
    The tools and workshop equipment are selected and the work area is prepared in accordance with job instructions. 

    ASSESSMENT CRITERION 3 
    Safety equipment is set up and personal protection equipment is selected in accordance with standard workplace instructions. 
    ASSESSMENT CRITERION RANGE 
    Safety equipment and personal protective equipment includes, but is not limited to:
  • Overalls, boots and gloves, safety screens, trestles, rigging and lifting equipment.
     
    		•

    SPECIFIC OUTCOME 2 
    Disassemble the minor drive train component. 
    OUTCOME RANGE 
    Includes, but is not limited to:
  • Following the correct methodology.
  • Following the correct sequence of activities.
  • Using the correct tools and equipment.
  • Marking off settings and positions.
  • Safe storage of spares, fasteners and attachment agents. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The minor drive train component is disassembled according to manufacturer specifications. 

    ASSESSMENT CRITERION 2 
    The spares are cleaned and prepared for inspection in accordance with job instructions. 
    ASSESSMENT CRITERION RANGE 
    The range includes, but is not limited to:
  • Selection and use of the correct cleaning agent.
  • Placement of spares in a logical sequence for inspection.
     
    		•

    SPECIFIC OUTCOME 3 
    Identify malfunctioning or worn parts and secure the correct replacement parts. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The disassembled parts are inspected and measured for wear and tear or mechanical failure according to manufacturer specifications. 
    ASSESSMENT CRITERION RANGE 
    Includes, but is not limited to:
  • Visual inspections of minor drive train components.
  • Measurement of tolerances and specifications as prescribed by the manufacturer using engineering measuring equipment and gauges.
     
    		•

    ASSESSMENT CRITERION 2 
    The worn or defective parts are identified in accordance with tolerances and limits specified by the manufacturer. 

    ASSESSMENT CRITERION 3 
    Replacement parts are ordered or requisitioned according to workplace procedures. 

    SPECIFIC OUTCOME 4 
    Reassemble the minor drive train component. 
    OUTCOME RANGE 
    Includes, but is not limited to:
  • Following the correct methodology.
  • Following the correct sequence of activities.
  • Using the correct tools and equipment.
  • Selection and use of lubricants.
  • Securing and aligning the spare parts.
  • Verifying settings.
  • Selection and use of fasteners and attachment agents.
  • Selection and use of seals and gaskets. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The parts are fitted according to manufacturer specifications. 

    ASSESSMENT CRITERION 2 
    The minor drive train component is reassembled in accordance with manufacturer specifications. 

    ASSESSMENT CRITERION 3 
    Components and surfaces are cleaned in accordance with job instructions. 

    ASSESSMENT CRITERION 4 
    The functionality of the reassembled minor drive train component is tested and confirmed according to workplace procedures. 

    SPECIFIC OUTCOME 5 
    Keep the workplace safe and productive. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Occupational safety, health and environmental protection measures are adhered to as provided for by workplace policies and procedures. 
    ASSESSMENT CRITERION RANGE 
    Includes, but is not limited to:
  • Measures to protect the person and other employees from personal injury and health risks (eyes, ears, lungs, feet, body, head).
  • Prevention of contamination of the environment.
  • Functionality and safety of tools and equipment.
  • Use of and compliance to warning signs and symbols.
  • Compliance with demarcated areas.
     
    		•

    ASSESSMENT CRITERION 2 
    Workshop administration and documentation are completed in accordance with standard workplace instructions. 

    ASSESSMENT CRITERION 3 
    Housekeeping duties are performed in accordance with standard workplace procedures. 
    ASSESSMENT CRITERION RANGE 
    Housekeeping procedures includes, but is not limited to:
  • Keeping the work area neat and organised.
  • Disposing of and/or recycling worn spares.
  • Discarding waste and empty containers.
  • Cleaning spillages.
     
    		•

    ASSESSMENT CRITERION 4 
    End of task duties are performed in accordance with standard workplace instructions. 
    ASSESSMENT CRITERION RANGE 
    The end of task duties include, but are not limited to:
  • Cleaning of tools and equipment.
  • Reporting unsafe or dysfunctional tools and equipment.
  • Storage of tools and equipment.
  • Storage of unused spares and consumables.
     
    		•

    ASSESSMENT CRITERION 5 
    Reporting and decision making is performed in accordance with workplace instructions. 
    ASSESSMENT CRITERION RANGE 
    Reporting and decision making includes, but is not limited to:
  • Following the correct channels.
  • Acting within levels of authority.
  • Adhering to delegated decision making powers.
     
    		•


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Assessors assessing learners against this unit standard must be registered as an assessor with the relevant ETQA.
  • An institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA.
  • Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines in the relevant qualification and the agreed ETQA procedures.

    The assessment of qualifying learners against this standard should meet the requirements of established principles. Practical assessment activities will be used, which are appropriate to the contents/industry/environment in which qualifying learners are working. These activities will include an appropriate combination of self and peer assessment, practical and oral assessments, observations etc.

    The assessment should ensure that all the specific outcomes, critical cross-field outcomes and essential embedded knowledge are assessed. The specific outcomes must be assessed in their own right, through oral and practical evidence. Assessment by observation only cannot be done.

    The specific outcomes and essential knowledge must be assessed in relation to each other. If a qualifying learner is able to explain the essential embedded knowledge, but is unable to provide evidence of competence in the specific outcomes, then they should be judged as not yet competent. Similarly, if a learner is able to perform specific outcomes, but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be judged as competent.

    Evidence of the specified critical cross-field outcomes should be found, both in performance and in the essential embedded knowledge.

    Performance of specific outcomes must actively affirm target groups of qualifying learners, not unfairly discriminate against them. Qualifying learners should be able to justify their performance in terms of these values. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Embedded knowledge is reflected in the assessment criteria for each specific outcome.

    Embedded knowledge includes:
  • Sequence of activities of overhauling the minor drive train component.
  • Fasteners, locking devises and attachment agents.
  • Correct procedures.
  • Manufacturer specifications.
  • Tools, including specialised tools recommended by the manufacturer. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    The learner is able to identify and solve problems in which responses display that responsible decisions, using critical and creative thinking, have been made by:
  • Worn or defective parts are identified.
  • Problems encountered when overhauling the minor drive train component are resolved. 
    		•

    UNIT STANDARD CCFO WORKING 
    The learner is able to work effectively with others as a member of a team, group, organisation or community by:
  • Adhering to delegated levels of authority when making decisions.
  • Following reporting channels in the workplace.
  • Adhering to workplace policies and procedures. 
    		•

    UNIT STANDARD CCFO ORGANISING 
    The learner is able to organise and manage himself and his activities responsibly and effectively by:
  • Planning and preparing to overhaul a minor drive train component.
  • Performing activities in a organised and logical sequence.
  • Adhering to prescribed housekeeping guidelines. 
    		•

    UNIT STANDARD CCFO COLLECTING 
    The learner is able to collect, analyse, organise and critically evaluate information by:
  • Accessing and applying manufacturer specifications. 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    The learner is able to demonstrate effective communication by:
  • Reading and interpreting instructions.
  • Completing relevant documentation. 
    		•

    UNIT STANDARD CCFO SCIENCE 
    The learner is able to use science and technology effectively and critically, showing responsibility towards the environment and health of others by:
  • Complying with health, safety and environmental protection measures. 
    		•

    UNIT STANDARD CCFO DEMONSTRATING 
    The learner is able to demonstrate an understanding of the world as a set of related systems by:
  • Understanding the basic interaction of different parts of a component in relation to the functionality of the component.
  • Understanding the potential impact of non-serviceable parts on the efficiency and safety of the equipment. 
    		•

    UNIT STANDARD CCFO CONTRIBUTING 
    The learner is able to contribute to the full personal development of themselves and the social and economic development of the society at large. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  59099   National Certificate: Agricultural Equipment Service and Repair  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  AgriSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.