SAQA

All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.

SOUTH AFRICAN QUALIFICATIONS AUTHORITY

REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE:

Estimate the cost and duration of an automotive repair

SAQA US ID	UNIT STANDARD TITLE
244134	Estimate the cost and duration of an automotive repair
ORIGINATOR
SGB Vehicle Maintenance
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-
FIELD			SUBFIELD
Field 06 - Manufacturing, Engineering and Technology			Manufacturing and Assembly
ABET BAND	UNIT STANDARD TYPE	PRE-2009 NQF LEVEL	NQF LEVEL	CREDITS
Undefined	Regular	Level 4	NQF Level 04	6
REGISTRATION STATUS		REGISTRATION START DATE	REGISTRATION END DATE	SAQA DECISION NUMBER
Passed the End Date - Status was "Reregistered"		2018-07-01	2023-06-30	SAQA 06120/18
LAST DATE FOR ENROLMENT		LAST DATE FOR ACHIEVEMENT
2024-06-30		2027-06-30

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.

This unit standard does not replace any other unit standard and is not replaced by any other unit standard.

PURPOSE OF THE UNIT STANDARD

This unit standard is for people in the automotive engineering industry who are required to estimate the cost of an automotive repair.

People credited with this unit standard are able to:

Establish the details for calculating an estimate.

Prepare a repair estimate.

Produce and record the estimate.

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING

It is assumed that learners are already competent in Communication and Mathematical Literacy at NQF Level 3.

UNIT STANDARD RANGE

The following scope and context applies to the whole unit standard:

Reference to company requirements and company policy means that the standard must comply with any policies and requirements of the company involved, and the ethical codes of relevant professional management organisations.

Practical assessment evidence must be obtained in the workplace under normal workplace conditions.

Specific range statements are provided in the body of the unit standard where they apply to particular specific outcomes or assessment criteria.

Specific Outcomes and Assessment Criteria:

SPECIFIC OUTCOME 1

Establish the details for calculating an estimate.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

The work requirements are obtained and recorded in terms of the nature and extent of the service and requested deadlines.

ASSESSMENT CRITERION 2

The job is analysed in terms of complexity of work and time required for the job.

ASSESSMENT CRITERION 3

Existing similar estimate records are accessed as a reference for cost and time estimates.

ASSESSMENT CRITERION 4

The availability of parts and labour is established in terms of procurement requirements and workshop schedules.

SPECIFIC OUTCOME 2

Prepare a repair estimate.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Reference material is selected and used as a basis for the cost and time estimate.

ASSESSMENT CRITERION 2

The estimate is calculated according to company administration procedures.

ASSESSMENT CRITERION RANGE

Price of parts, labour content, sundry expenses, outwork, hired equipment, tax.

ASSESSMENT CRITERION 3

The written estimate is prepared which meets all legal requirements.

SPECIFIC OUTCOME 3

Produce and record the estimate.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

The itemised estimate is presented and explained to the customer in accordance with company procedures.

ASSESSMENT CRITERION 2

The estimate is recorded for the customer in accordance with company procedures.

UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS

Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.

Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.

Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.

Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the Unit Standard.

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE

The following embedded knowledge is addressed in an integrated way in the unit standard:

Workplace policies and procedures.

Safe working practices.

How to estimate the duration of a job.

How to estimate the cost of a job.

How to treat customers courteously.

UNIT STANDARD DEVELOPMENTAL OUTCOME

N/A

UNIT STANDARD LINKAGES

N/A

Critical Cross-field Outcomes (CCFO):

UNIT STANDARD CCFO IDENTIFYING

Identify and solve problems and make decisions using critical and creative thinking.

UNIT STANDARD CCFO WORKING

Work effectively with others as members of a team, group, organisation or community.

UNIT STANDARD CCFO ORGANISING

Organise and manage themselves and their activities responsibly and effectively.

UNIT STANDARD CCFO COLLECTING

Collect, analyse, organise and critically evaluate information.

UNIT STANDARD CCFO COMMUNICATING

Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations.

UNIT STANDARD CCFO SCIENCE

Use science and technology effectively and critically showing responsibility towards the environment and health of others.

UNIT STANDARD ASSESSOR CRITERIA

N/A

REREGISTRATION HISTORY

As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015.

UNIT STANDARD NOTES

Terminology:

Terms used in this unit standard are generic to the automotive engineering industry in South Africa.

Notes to Assessors:

Assessors should keep the following principles in mind when designing and conducting assessments against this unit standard:

Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the person competent in terms of the title. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.

Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the candidate is able to perform in the real situation.

Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.

The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.

The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the candidate can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.

All assessments should be conducted in line with the following well documented principles of assessment: appropriateness, fairness, manageability, integration into work or learning, validity, direct, authentic, sufficient, systematic, open and consistent.

QUALIFICATIONS UTILISING THIS UNIT STANDARD:

	ID	QUALIFICATION TITLE	PRE-2009 NQF LEVEL	NQF LEVEL	STATUS	END DATE	PRIMARY OR DELEGATED QA FUNCTIONARY
Core	64411	Further Education and Training Certificate: Automotive Spray Painting	Level 4	NQF Level 04	Passed the End Date - Status was "Reregistered"	2023-06-30	MERSETA
Elective	64549	Further Education and Training Certificate: Automotive Body Repair	Level 4	NQF Level 04	Passed the End Date - Status was "Reregistered"	2023-06-30	MERSETA
Elective	78525	Further Education and Training Certificate: Automotive Repair and Maintenance	Level 4	NQF Level 04	Passed the End Date - Status was "Reregistered"	2023-06-30	As per Learning Programmes recorded against this Qual
Elective	58539	Further Education and Training Certificate: Automotive Repair and Maintenance	Level 4	NQF Level 04	Passed the End Date - Status was "Registered"	2009-02-18	Was MERSETA until Last Date for Achievement

PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD:

This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.

NONE