SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Weld pipe with oxy-acetylene gas process 
SAQA US ID UNIT STANDARD TITLE
14721  Weld pipe with oxy-acetylene gas process 
ORIGINATOR
SGB Welding 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  20 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for a learner within the fabrication and welding fields
A person credited with this unit standard is capable of:
  • Describe and assemble the oxy-acetylene gas welding equipment
  • Select, set up and conduct pre-operational checks of shielded metal arc welding equipment
  • Prepare pipes prior to welding
  • Weld pipes
  • Inspect welded pipes for defects in compliance with drawing specifications
  • Care and store welding consumables and equipment

    This unit standard will contribute to the full development of any learner by providing recognition, further mobility and transportability within the field. The knowledge, skills and understanding demonstrated in this unit standard are essential for social and economic transformation and upliftment within the fabrication and welding environment. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    National Certificate in Welding Application and Practice NQF level 3. 

    UNIT STANDARD RANGE 
    Scope:
    Range of materials used is:
  • Low and medium carbon steel (up to 3mm thick)

    Context
  • All work undertaken must comply with Occupational Health and Safety Act
  • All work done must comply with worksite practices
  • All work done under ad-hoc supervision

    Level
    Level (for level 4)
    A learning programme leading to the award of this unit standard should develop learners who demonstrate:

    (a) A range of well-developed skills
    (b) An ability to offer a significant choice of procedures
    (c) Some relevant theoretical knowledge
    (d) An ability to interpret available information
    (e) An ability to respond to familiar problems
    (f) An ability to function with significant responsibility. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Describe and assemble the oxy-acetylene gas welding equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. The importance of correct assembly of the oxy-acetylene gas welding equipment, and the consequences of incorrect assembly, is explained with reference to the manufacture's requirements. 

    ASSESSMENT CRITERION 2 
    2. Basic and major components of the oxy-acetylene gas welding equipment are identified and the explanation of function and purpose is correct in terms of manufacture's requirements and standards. 

    ASSESSMENT CRITERION 3 
    3. Parts and components correctly identified and the implications for incorrect identification explained. 

    ASSESSMENT CRITERION 4 
    4. Terms and definitions used are consistent with generally accepted welding terminology as recorded in international welding standards. 
    ASSESSMENT CRITERION RANGE 
    Parts includes Welding hoses, jubilee clamps, gas cylinders (oxygen and acetylene), gauges, welding torch, welding nozzles, non-return valves and flashback arrestors.
     

    SPECIFIC OUTCOME 2 
    Select, set up and conduct pre operational checks of oxy-acetylene gas welding equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Verification of identification and selection of oxy-acetylene gas welding equipment as specified on welding procedure specification. 

    ASSESSMENT CRITERION 2 
    2. Identification and rectification of hazards relate to welding process in accordance with standard work site practices. 

    ASSESSMENT CRITERION 3 
    3. Pre operational checks are carried out in accordance with manufacture's specifications. 

    ASSESSMENT CRITERION 4 
    4. A safe worksite is created to prevent damage to equipment and injury to people. 
    ASSESSMENT CRITERION RANGE 
    Resources to include: manufacture's operational and specifications manual, worksite practices and safety and environmental issues.
     

    SPECIFIC OUTCOME 3 
    Prepare pipes prior to welding. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Pipes prepared prior to welding as specified on drawing and worksite practices. 

    ASSESSMENT CRITERION 2 
    2. Dimensions and alignment checked as specified on drawing. 

    ASSESSMENT CRITERION 3 
    3. Workpiece tack welded in position as per drawing specifications. 

    ASSESSMENT CRITERION 4 
    4. Safety precautions adhered to. 

    ASSESSMENT CRITERION 5 
    5. Inspect workpiece prior to welding. 
    ASSESSMENT CRITERION RANGE 
    Resources include: Worksite practices, tools, equipment, safety requirements and welding consumables in relation to job requirements.
     

    SPECIFIC OUTCOME 4 
    Weld pipes. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Welding filler material selected as specified on welding procedure specifications. 

    ASSESSMENT CRITERION 2 
    2. Workpiece welded in position. 

    ASSESSMENT CRITERION 3 
    3. Safety precaution adhered to during welding process. 

    ASSESSMENT CRITERION 4 
    4. Workpiece cleaned after welding as per worksite practices. 

    ASSESSMENT CRITERION 5 
    5. Welding parameters are established to an approved welding procedure specification (WPS). 

    ASSESSMENT CRITERION 6 
    6. Potential causes for weld imperfections are identified prior to welding and action taken meets WPS. 
    ASSESSMENT CRITERION RANGE 
    Range: Heat input, metal transfer mode, electrode size, joint preparation, welding technique, and consumable handling.

    Material type to be welded: Low and medium carbon steels up to 3mm thick
    Resources include: Welding equipment, tools, protective clothing and equipment, welding procedure specification, materials as specified on drawings and weld filler material
     

    SPECIFIC OUTCOME 5 
    Inspect welded pipes. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. All scaling removed as specified in cleaning procedure. 

    ASSESSMENT CRITERION 2 
    2. Welded workpiece conform to specifications as reflected on drawing. 

    ASSESSMENT CRITERION 3 
    3. Visual Inspection methods and procedures selected is conducive to job requirements and in accordance with ISO417 welding standards. 

    ASSESSMENT CRITERION 4 
    4. Documentation completed as reflected in worksite practices. 
    ASSESSMENT CRITERION RANGE 
    Procedures include: Worksite practices, inspection methods (visual only), and cleaning procedures.
     

    SPECIFIC OUTCOME 6 
    Care and store welding consumables and equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Tools and equipment care for as per worksite practices. 

    ASSESSMENT CRITERION 2 
    2. Tools and equipment stored to conform to worksite practices and procedures. 

    ASSESSMENT CRITERION 3 
    3. Welding consumables stored in accordance with worksite practices and procedures. 
    ASSESSMENT CRITERION RANGE 
    Tools and equipment cared for is limited to defect reporting and stored in a usable condition for next user
    Welding consumables stored and marked with identification label, which indicate item number and type/colour coding used for identification purposes.
     


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    Anyone assessing a learner against this unit standard, must be registered as an assessor with the relevant ETQA

    Any institution offering learning that will enable achievement of this unit standard must be accredited in terms of the criteria laid down by the relevant ETQA.

    Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines in the relevant qualification and the agreed ETQA procedures. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    1. Names & functions of:
  • Oxy-acetylene welding equipment
  • Consumables
  • Personal protective equipment

    2. Attributes, descriptions, characteristics & properties:
  • Types of metals and their properties
  • Types of gas mixtures and gas pressures
  • Common defects
  • Hazards

    3. Sensory cues
  • Smell indicating flammable gas leaks
  • Smell indicating overheating equipment

    4. Purpose of:
  • Oxy-acetylene welding
  • Safety checks
  • Reporting incidents and conditions
  • Checking completed weld

    5. Processes, events, causes and effects, implications:
  • Implications of incorrect welding parameters
  • Causes and responses to defects
  • Basic welding process
  • Implications of not preparing workpiece before welding

    6. Procedures and techniques:
  • Set up procedures for oxy-acetylene welding
  • Oxy-acetylene welding procedure
  • Preparation for welding metals
  • Safety procedures
  • Quality procedures
  • Checking procedure
  • Recording and reporting procedures

    7. Regulations, legislation, agreements, policies, standards:
  • Applicable safety, health and environmental protection legislation and standards

    8. Theory: rules, principles, laws:
  • Expansion and contraction

    9. Relationships, systems:
  • Relationship of the consumables and the equipment to the metals and components. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems
  • Recognise problems while welding and respond appropriately
  • Defects are recognised and corrected
  • Hazards are recognised and prevented. 

  • UNIT STANDARD CCFO WORKING 
    Work together with others
  • Contribute to workgroup effort. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities
  • Plan sequence of operations based on job instructions and set up equipment appropriately. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information
  • Visually examine and conduct tests on completed weld to control quality. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Collect, analyse, organise and critically evaluate information
  • Visually examine and conduct tests on completed weld to control quality. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically
  • Understanding of gas mixture, flame settings and gas pressures and their effects on types of metals. 

  • UNIT STANDARD CCFO CONTRIBUTING 
    Demonstrate an understanding of the world as a set of related systems
  • Understand and explain the role of oxy-acetylene welding in the engineering fabrication industry. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard may be obtained through RPL. The learner should be thoroughly briefed on the mechanism to be used and support and guidance should be provided. Care should be taken that the mechanism used provides the learner with an opportunity to demonstrate competence and is not so onerous as to prevent learners from taking up the RPL option towards gaining a qualification.

    Supplementary infomation

    Assessment Tools
    These tools may include the following:
  • In-situ (on-the-job) observations
  • Role-play simulations
  • Structured group discussions
  • Written reports (e.g. tests, exams, case studies, projects, registers, logbooks, workbooks)
  • Verbal report backs (presentations)
  • Portfolios of evidence
  • Projects
  • Experiential learning
  • Working in teams
  • Scenario sketching

    Supplementary Material

    Resource material as registered by NSB 06 and accredited by relevant
    ETQA.

    NOtes to assesors:

    Assessors should keep the following general principles in mind when designing and conducting assessments against this unit standard:
  • Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the person competent in terms of the title. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.
  • Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the candidate is able to perform in the real situation.
  • Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
  • The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.
  • The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the candidate can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.
  • All assessments should be conducted in line with the following well documented principles of assessment: appropriateness, fairness, manageability, integration into work or learning, validity, direct, authentic, sufficient, systematic, open and consistent

    The following particular issues should be taken into consideration when assessing against this unit standard:

    2. Definition of Terms:
    Terms have been clarified as far as possible through the use of range statements. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  24216   National Certificate: Welding Application and Practice  Level 4  NQF Level 04  Passed the End Date -
    Status was "Registered" 
    2006-12-03  MERSETA 
    Elective  57887   Further Education and Training Certificate: Welding Application and Practice  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.