SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Produce detailed engineering drawings 
SAQA US ID UNIT STANDARD TITLE
13298  Produce detailed engineering drawings 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  6 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The skills, values and knowledge reflected in this unit standard are required by people in the field of engineering.

The learning outcomes in this unit standard also contribute to the exit level outcomes required for various NQF level 3 engineering qualifications.

Qualifying learners can read, interpret and produce detailed engineering drawings. These working drawings of assemblies and components could include pumps, gearboxes, hydraulic cylinders, support frames and holding devices, as well as cams, screwthreads and basic gears. All drawings produced must meet required recognised international drawing standards. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as part of a progression. It is one of a series of unit standards for engineering drawing.

The credits allocated to this unit standard assume that a learner has already learned to:
  • Read, interpret and produce basic engineering drawings. 
    		•

    UNIT STANDARD RANGE 
    The scope and level of this unit standard is determined by the ranges as indicated under the specific outcomes.

    The learner should be able to work autonomously with minimal supervision. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Determine drawing requirements. 
    OUTCOME NOTES 
  • Identify and interpret components or assemblies
  • Select drawing parameters 
    		•
    OUTCOME RANGE 
    Drawing parameters include projection, view, scale and layout 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Drawings produced comply with job requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Engineering drawings are produced taking into account line structures, dimensions and projections
    2. Interpretation is done in a methodical manner
    3. Progressive tolerance calculations ensure functional operation of components/assemblies drawn

    Understanding confirmed:

    Respond to `what if` and `why` questions covering:
  • Engineering symbols and abbreviations
  • Measurement and dimensions
  • Use of measurement scales
  • Concepts of geometry and unit of measurement
  • Material lists
  • Line types
  • To scale drawings
  • Projections
  • Perspective positioning
  • Dimensioning 
    		•

    SPECIFIC OUTCOME 2 
    Perform calculations to produce drawing. 
    OUTCOME NOTES 
  • Calculate progressive tolerances
  • Select appropriate dimensions 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Drawings produced comply with job requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Engineering drawings are produced taking into account line structures, dimensions and projections
    2. Interpretation is done in a methodical manner
    3. Progressive tolerance calculations ensure functional operation of components/assemblies drawn

    Understanding confirmed:

    Respond to `what if` and `why` questions covering:
  • Engineering symbols and abbreviations
  • Measurement and dimensions
  • Use of measurement scales
  • Concepts of geometry and unit of measurement
  • Material lists
  • Line types
  • To scale drawings
  • Projections
  • Perspective positioning
  • Dimensioning 
    		•

    SPECIFIC OUTCOME 3 
    Produce drawings. 
    OUTCOME NOTES 
  • Dimension and label drawing
  • Compile material list 
    		•
    OUTCOME RANGE 
    Engineering drawings can be produced in isometric, oblique and sectional first and third angle projections 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Drawings produced comply with job requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Engineering drawings are produced taking into account line structures, dimensions and projections
    2. Interpretation is done in a methodical manner
    3. Progressive tolerance calculations ensure functional operation of components/assemblies drawn

    Understanding confirmed:

    Respond to `what if` and `why` questions covering:
  • Engineering symbols and abbreviations
  • Measurement and dimensions
  • Use of measurement scales
  • Concepts of geometry and unit of measurement
    Material lists
  • Line types
  • To scale drawings
  • Projections
  • Perspective positioning
  • Dimensioning 
    		•


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    My assessment will be governed by the policies and guidelines of the relevant Education and Training Quality Assurance Body who has jurisdiction over this field of learning. My assessor will be accredited and have a technical qualification in this learning area.

    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.

    I will be assessed in the workplace but I can submit documents, projects, test results and assignments that were not produced in the workplace.

    I can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names & functions of:
  • Material lists
  • Engineering symbols, abbreviations, conventions (according to international drawing standards)
  • Geometrical constructions
  • Machining symbols

    Purpose of:
  • Engineering drawings

    Processes, events, causes and effects, implications:
  • Implications of incorrectly producing an engineering drawing

    Procedures and techniques
  • Drawing sequence
  • For isometric, oblique and sectional 1st and 3rd angle projections
  • Perspective positioning
  • Set of techniques for screw threads (single start and square) and threaded fasteners

    Theory: rules, principles, laws
  • Units of measurement (conversion) and measurement scales
  • Applicable mathematics required to perform progressive tolerance calculations
  • Geometry
  • Dimensioning
  • Sectioning

    Relationships, systems:
    Relationship between engineering drawing and the manufacture of a product that meets customer specifications 
    		•


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Related to the detailed drawing of a component/assembly 
    		•

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • According to procedures, following regular, consistent methodical work patterns 
    		•

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • Interpret drawing requirements
  • Make decisions based on information 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Record work done 
    		•

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Relate appropriate theory to the production of a drawing 
    		•

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Understand and explain the purpose of the engineering drawing to the manufacturing process
  • Explain the importance of correctly producing the engineering drawing 
    		•

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  91926   National Certificate: Mechanical Engineering: Machining and Tooling  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  As per Learning Programmes recorded against this Qual 
    Core  36153   National Certificate: Polymer Composite Fabrication  Level 4  Level TBA: Pre-2009 was L4  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  66449   National Certificate: Foundry Operations  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2013-11-07  MERSETA 
    Elective  23274   National Certificate: Mechanical Engineering: Fitting  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2008-06-25  MERSETA 
    Elective  59669   National Certificate: Mechanical Engineering: Fitting  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  23255   National Certificate: Mechanical Engineering: Fitting and Machining  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  23278   National Certificate: Mechanical Engineering: Machining  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2008-10-22  Was MERSETA until Last Date for Achievement 
    Elective  23280   National Certificate: Mechanical Engineering: Tooling Manufacture  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2008-10-22  Was MERSETA until Last Date for Achievement 
    Elective  66489   Further Education and Training Certificate: Foundry Operations  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered"     		 2013-11-07  MERSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. ALLOYS HEAD OFFICE 
    2. HARMONY GOLD MINING CO LTD 
    3. KUMBA IRON ORE (SISHEN) 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.