SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Change and set tooling 
SAQA US ID UNIT STANDARD TITLE
13170  Change and set tooling 
ORIGINATOR
SGB Plastics Manufacturing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  16 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Registered" 
2003-12-03  2005-04-13  SAQA 0151/03 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2006-04-13   2009-04-13  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
119140  Changeover and set up tooling for plastics manufacturing processes  Level 4  NQF Level 04  10   

PURPOSE OF THE UNIT STANDARD 
Learners who are involved in changing and setting tooling of industrial rubber manufacturing equipment require the skills, values and knowledge reflected in this unit standard.

Qualifying learners can acquire, prepare, change and set up machine tooling such as moulds, dies or forming devices in industrial rubber manufacturing processes to produce a quality product. They will understand the importance of accurate tooling set up and how this is achieved. This will include determining the setup requirements, carrying out post-setup checks and taking corrective action.

The learning outcomes in this unit standard also contribute to the exit level outcomes required for the National Certificate in Industrial Rubber Manufacturing (Mixing, Extruding, Moulding or Calendaring) (NQF level 3) and related qualifications. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as part of a progression. It is one of a series of unit standards for producing product in an industrial rubber manufacturing skills area.

The credits allocated to this unit standard assume that a learner has already learned to:
  • Operate industrial rubber manufacturing equipment. 

  • UNIT STANDARD RANGE 
    The ranges as indicated under the specific outcomes determine the scope and level of this unit standard.

    The learner should be able to work with minimal supervision and according to worksite and manufacturer specifications and occupational safety, health and environmental legislation.

    Work is generally, but not exclusively, carried out in a team environment. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Plan and prepare for activity. 
    OUTCOME RANGE 
  • Planning and preparing includes collecting job cards and schedules, determining job requirements and sequencing activities.
  • Preparing includes ensuring system is safe. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Tooling is acquired and installed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 2 
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 3 
    Results achieved
    1. Tooling is acquired and installed
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating
    3. Records are completed and processed, and reports made

    Indicators
    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed
    1. Respond to `what if` and `why` questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • SPECIFIC OUTCOME 2 
    Prepare set up tools and instruments. 
    OUTCOME RANGE 
    Tools and instruments include hand tools, power tools, lifting devices and graduated measuring equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Tooling is acquired and installed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 2 
    Results achieved
    1. Tooling is acquired and installed
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating
    3. Records are completed and processed, and reports made

    Indicators
    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed
    1. Respond to `what if` and `why` questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 3 
    3. Records are completed and processed, and reports made. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • SPECIFIC OUTCOME 3 
    Prepare work area for tooling change. 
    OUTCOME NOTES 
  • Make system safe
  • Ensure equipment is isolated 
  • OUTCOME RANGE 
  • Tooling includes moulds, dies, forming devices used in the shaping and forming of end products.
  • Tooling components includes but are not limited to, ejector-, adjuster-, stripper plates; slides; cores; spacers.
  • Making system safe includes isolation and using protective equipment.
  • Isolation includes electrical and mechanical energy. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Tooling is acquired and installed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 2 
    Results achieved
    1. Tooling is acquired and installed
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating
    3. Records are completed and processed, and reports made

    Indicators
    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed
    1. Respond to `what if` and `why` questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 3 
    3. Records are completed and processed, and reports made. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • SPECIFIC OUTCOME 4 
    Change and set up tooling. 
    OUTCOME NOTES 
  • Use appropriate tools and instruments for removal and installation
  • Prepare removed tool for storage
  • Check tooling is ready for production
  • Identify problems and take corrective action 
  • OUTCOME RANGE 
    Changing and setting up includes removing currently installed tooling; installing new tooling; connecting services; making mechanical adjustments using any built-in machine functions; heat soaking; setting safety devices. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Tooling is acquired and installed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 2 
    Results achieved
    1. Tooling is acquired and installed
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating
    3. Records are completed and processed, and reports made

    Indicators
    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed
    1. Respond to `what if` and `why` questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 3 
    3. Records are completed and processed, and reports made. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • SPECIFIC OUTCOME 5 
    Apply quality checks on completed work. 
    OUTCOME RANGE 
    Quality checks include rechecking set up and conducting trial runs. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Tooling is acquired and installed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 2 
    Results achieved
    1. Tooling is acquired and installed
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating
    3. Records are completed and processed, and reports made

    Indicators
    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed
    1. Respond to `what if` and `why` questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 3 
    3. Records are completed and processed, and reports made. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • SPECIFIC OUTCOME 6 
    Care for and store material preparation tools and equipment. 
    OUTCOME RANGE 
    Caring for includes cleaning and replacing protective covers. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Tooling is acquired and installed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 2 
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 3 
    Results achieved
    1. Tooling is acquired and installed
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating
    3. Records are completed and processed, and reports made

    Indicators
    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed
    1. Respond to `what if` and `why` questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • SPECIFIC OUTCOME 7 
    Complete all applicable documentation related to acquiring, moving and setting up of tooling. 
    OUTCOME NOTES 
    Complete all applicable documentation related to acquiring, moving and setting up of tooling and quantities and usage, and report on tooling installation and set up. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Tooling is acquired and installed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 2 
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 3 
    Results achieved
    1. Tooling is acquired and installed
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating
    3. Records are completed and processed, and reports made

    Indicators
    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed
    1. Respond to `what if` and `why` questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • SPECIFIC OUTCOME 8 
    Discuss and explain incidents and problems related to tooling set up. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Tooling is acquired and installed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 2 
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 3 
    Results achieved
    1. Tooling is acquired and installed
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating
    3. Records are completed and processed, and reports made

    Indicators
    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed
    1. Respond to `what if` and `why` questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • SPECIFIC OUTCOME 9 
    Work safely with due care for self, fellow workers, equipment, materials and the environment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Tooling is acquired and installed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 2 
    Results achieved
    1. Tooling is acquired and installed
    2. Tooling is set up and ready for production within the standard time for that specific tooling installation, including alignment, mechanical movement (speeds and pressures), temperature, services connected and functioning, safety devices operating
    3. Records are completed and processed, and reports made

    Indicators
    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed
    1. Respond to `what if` and `why` questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 

  • ASSESSMENT CRITERION 3 
    3. Records are completed and processed, and reports made. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Work area, tools and instruments are prepared
    2. Equipment is confirmed to be safe
    3. Applicable tools and instruments are prepared in accordance with manufacturer specifications
    4. Applicable tooling is sourced and handled / transported according to manufacturer recommendations
    5. Services (where applicable) are connected and tooling components are put into operation and checked
    6. No damage or delays are caused during changing and setting of tooling as a result of poor planning and failure to identify problems
    7. Work is systematic and consistent and covers the following areas: preparation, layout, installation, sequencing, checking
    8. Problems are identified and reported to appropriate personnel in a timely manner and appropriate corrective action is taken
    9. A clean and tidy work environment is maintained
    10. Applicable health, safety and environmental procedures are adhered to
    11. Appropriate protective equipment is selected and worn / used

    Understanding confirmed:

    1. Respond to 'what if' and 'why' questions related to:
  • Tools and equipment used
  • Safety issues during installation and set up
  • Steps to take to limit tooling damage
  • Changing and setting
  • The importance of handling tooling correctly
  • Reasons for delays and problems encountered
  • Implications of delays for the production process
  • The importance of continuously checking the quality of work against the requirements of the job
  • The importance of caring for and storing tools and equipment
  • Impact of product and process requirements on tooling
  • Cost implications of damage, incorrect settings and time required for changing of tooling
  • Implications of not adhering to sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    My assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assurance who has jurisdiction over this field of learning. My assessor will be accredited and have a technical qualification in this learning area.

    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.
    I will be assessed in the workplace but I can submit documents, projects, test results and assignments that were not produced in the workplace.

    I can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    1. Names & functions of:
  • Installation and set up tools and instruments
  • Tooling parts
  • Installation aides
  • Components related to services attached to the tooling

    2. Purpose of:
  • Following tooling installation and set up schedules
  • Documents related to installation and set up
  • Tooling

    3. Attributes, descriptions, characteristics & properties:
  • Of tooling and implications for installation, removal, setting and storage
  • Construction materials of tooling
  • Raw materials and their impact on, and interaction with, tooling

    4. Sensory cues:
  • Sensory cues (what I see, hear, smell, feel) utilised for identifying problems associated with alignment and high closing speeds

    5. Processes and events, causes and effects, implications of:
  • Effects of poor handling and storage on tooling
  • Implications of the installation process on product quality, costs and safety
  • Possible problem areas
  • Implication of heat on tooling and product quality
  • Implication of over-stressing tooling components, e.g. over tightening of nuts and bolts
  • Implications of poor alignment of tooling on equipment and product

    6. Procedures and techniques:
  • Techniques for handling tooling
  • For identifying problems
  • Procedures related to installation, removal, setting or care of tooling
  • Procedures for ensuring safety and limiting damage
  • Procedures for setting and maintaining quality

    7. Regulations, legislation, agreements, policies, standards:
  • Applicable safety, health and environmental protection legislation
  • Applicable company policies and procedures
  • Regulations related to services, e.g. electricity, compressed air
  • Quality standards and specifications

    8. Theory: rules, principles, laws:
  • Physical properties of tooling materials (elasticity, hardness, expansion, thermal characteristics)
  • Force, pressure, torque

    9. Relationships, systems:
  • Impact of tooling on product costing, tooling life, quality of product 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Identify product faults related to tooling and take corrective action
  • Identify and correct conditions or practices which will damage or reduce the life of the tooling 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others:
  • Interact with colleagues and team members in order to change and set up tooling 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • Apply the correct procedures and techniques for setting up tooling
  • Manage resources and my time 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • Interpret information off job instructions to acquire required tooling
  • Make decisions based on that information 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively
  • Report the performance of the tooling to relevant parties 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Use tools, instruments and components 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Understand and explain the purpose of tooling in the production process
  • Solutions to problems reflect an awareness that tooling forms the key to precision, speed and quality
  • Understand and explain the process that I am involved in with respect to the larger manufacturing process
  • Justify my actions as appropriate 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 119140, which is 'Changeover and set up tooling for plastics manufacturing processes', Level 4, 10.

    This unit standard can be contextualized for the Polymer Composite Fabrication Environment. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  23258   National Certificate: Industrial Rubber Manufacturing: Mixing OR Extruding OR Moulding OR Calendaring  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2011-02-16  MERSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.