SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Report measurement results 
SAQA US ID UNIT STANDARD TITLE
119236  Report measurement results 
ORIGINATOR
SGB Engineering 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Engineering and Related Design 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 5  Level TBA: Pre-2009 was L5 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to people who use, test and calibrate measuring artefacts and equipment. Persons credited with this unit standard are able to report measurement results.
  • Identify the needs of measurement reports/certificates.
  • Interpret the requirements for a measurement reports/certificates.
  • Generate a measurement report/certificate. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Competence in the following:
  • Define the role, functions and operation of the international measurement system.
  • Apply the ISO document "Guide to the expression of uncertainty in measurement" to estimate the uncertainty of measurement.
  • Develop calibration and test methods and procedures. 

  • UNIT STANDARD RANGE 
    The scope of this unit standard is to provide the learner with the knowledge and skills to generate a measurement report/certificate and provide appropriate interpretation in accordance with ISO/IEC 17025. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Identify the needs for measurement reports/certificates. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The needs for measurement reports/certificates are explained, as envisaged in ISO/IEC 17025. 

    SPECIFIC OUTCOME 2 
    Interpret the requirements for measurement reports/certificates. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The requirements for measurement reports/certificates are explained. 

    ASSESSMENT CRITERION 2 
    The responsibilities for authorizing a report/certificate are identified. 
    ASSESSMENT CRITERION RANGE 
    The requirements that are covered by this specific outcome, are listed in ISO/IEC 17025 paragraph 5.10.
     

    SPECIFIC OUTCOME 3 
    Generate a measurement report/certificate. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    An appropriately detailed measurement report/certificate is generated for given measurement results in accordance with ISO / IEC 17025. 

    ASSESSMENT CRITERION 2 
    The results are reported with appropriate resolution and uncertainty of measurement. 

    ASSESSMENT CRITERION 3 
    The results are correctly rounded-off and expressed with the correct units and decimal notation. 

    ASSESSMENT CRITERION 4 
    The results can be easily interpreted. 

    ASSESSMENT CRITERION 5 
    An appropriate compliance conclusion, relevant interpretations and opinions are provided. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner against this unit standard must be a registered SANAS Technical Assessor and registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA by SAQA.
  • Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines and the agreed ETQA procedures. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Essential embedded knowledge will be assessed through assessment of the specific outcomes in terms of the stipulated assessment criteria. Candidates are unlikely to achieve all the specific outcomes, to the standards described in the assessment criteria, without knowledge of the listed embedded knowledge. This means that for the most part, the possession or lack of the knowledge can be directly inferred from the quality of the candidate's performance. Where direct assessment of knowledge is required, assessment criteria have been included in the body of the unit standard.

    The understanding of how to apply ISO/IEC 17025 is embedded knowledge in this unit standard. 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking.
    Note: This is not addressed in any of these specific outcomes. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as members of a team, group, organisation or community.
    Note: This is not addressed in any of these specific outcomes. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively.
    Note: The preparation for generation of measurement report/certificate is required and communicates to fellow workers and laboratory manager his/her intentions - Refer to all "Specific Outcomes". 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.
    Note: The ability of the candidate to draw an appropriate compliance conclusion involves decision-making and critical analysis - Refer to "Specific Outcome" 2 and 3.
    2. Interpret the requirements for measurement reports/certificates.
    3. Generate a measurement report/certificate. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations.
    Note: This is not addressed in any of these specific outcomes. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others.
    Note: This is not addressed in any of these specific outcomes. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.
    Note: This is not addressed in any of these specific outcomes. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Note to Assessors

    Assessors should keep the following principles in mind when designing and conducting assessments against this unit standard:
  • Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the person competent in terms of the title. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.
  • Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the candidate is able to perform in the real situation.
  • Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
  • The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.
  • The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the candidate can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.
  • All assessments should be conducted in line with the following well documented principles of assessment: appropriateness, fairness, manageability, integration into work or learning, validity, direct, authentic, sufficient, systematic, open and consistent

    The following particular issues should be taken into consideration when assessing against this unit standard:

    Unit standard justification

    Level.

    Attribute
    Applied Competence- 5 Level
    Autonomy of Learning- 5 Level

    Actual Level Assigned: 5

    Credits.
    Total hours required by the learner to achieve the required outcome:

    Activity
    Classroom Teaching- 10 Hours
    On-The-Job Training- 20 Hours
    Mentoring required- -
    Other (Specify)-
    Total- 30 Hours

    Credits Assigned : 3 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  57228   National Certificate: Metrology  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  EWSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.