SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Maintain a display cartoning unit 
SAQA US ID UNIT STANDARD TITLE
117755  Maintain a display cartoning unit 
ORIGINATOR
SGB Secondary Agriculture: Processing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Secondary Agriculture 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  3 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
A learner who has achieved this unit standard will be competent in:
  • Maintaining a display cartoning unit to ensure optimum production performance of the unit 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    To enter a learning programme for this unit standard or to be assessed against this unit standard, the learner is assumed to have :
  • National Certificate in Cigarette Packaging - NQF Level 3
  • Mechanical background - NQF Level 3 or equivalent 
    		•

    UNIT STANDARD RANGE 
    The learner is expected to perform the specific outcomes as reflected in this unit standard with minimal supervision, but with access to work-site procedures and operating instructions

    The scope of this unit standard deals with the repair and commissioning of a display cartoning unit from the horizontal turret up to the bundle transfer unit

    Display cartoning unit components include, but are not limited to, suction cups, vacuum valve, pulling rollers, code dating applicator, corrugating rollers, stoppers, paste pot, paste applicators, mouthpiece and bundle pusher 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate an understanding of fault-finding on a display cartoning unit. 
    OUTCOME NOTES 
  • Linking the reported deviation to possible causes according to work site procedures
  • Determining the origin of the fault according to work site procedures 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Consequences are explained in the event of not:
  • Gaining safe access to display cartoning unit components
  • Determining the availability of machine spares
  • Replacing defective machine components
  • Adjusting display cartoning unit
  • Confirming the performance of the display cartoning unit against quality standards

    The purpose of the following are explained:
  • Linking the reported deviation to possible causes
  • Determining the origin of the fault
  • Informing affected parties
  • Restoring the work area
  • Completing relevant documentation 
    		•

    SPECIFIC OUTCOME 2 
    Plan and prepare for maintenance of the display cartoning unit. 
    OUTCOME NOTES 
  • Gaining access to display cartoning unit components according to work site and safety procedures
  • Determining the availability of machine spares according to work site procedures
  • Informing affected parties of the extent of maintenance according to work site procedures 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Consequences are explained in the event of not:
  • Gaining safe access to display cartoning unit components
  • Determining the availability of machine spares
  • Replacing defective machine components
  • Adjusting display cartoning unit
  • Confirming the performance of the display cartoning unit against quality standards

    The purpose of the following are explained:
  • Linking the reported deviation to possible causes
  • Determining the origin of the fault
  • Informing affected parties
  • Restoring the work area
  • Completing relevant documentation 
    		•

    SPECIFIC OUTCOME 3 
    Perform maintenance. 
    OUTCOME NOTES 
  • Replacing defective machine components, if applicable, according to work site procedures and manufacturer specifications
  • Adjusting display cartoning unit according to work site procedures and manufacturer specifications 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Consequences are explained in the event of not:
  • Gaining safe access to display cartoning unit components
  • Determining the availability of machine spares
  • Replacing defective machine components
  • Adjusting display cartoning unit
  • Confirming the performance of the display cartoning unit against quality standards

    The purpose of the following are explained:
  • Linking the reported deviation to possible causes
  • Determining the origin of the fault
  • Informing affected parties
  • Restoring the work area
  • Completing relevant documentation 
    		•

    SPECIFIC OUTCOME 4 
    Complete maintenance. 
    OUTCOME NOTES 
  • Confirming the performance of the display cartoning unit according to work site procedures and quality standards
  • Restoring the work area according to work site procedures
  • Informing affected parties according to work site procedures
  • Completing relevant documentation according to work site procedures 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Consequences are explained in the event of not:
  • Gaining safe access to display cartoning unit components
  • Determining the availability of machine spares
  • Replacing defective machine components
  • Adjusting display cartoning unit
  • Confirming the performance of the display cartoning unit against quality standards

    The purpose of the following are explained:
  • Linking the reported deviation to possible causes
  • Determining the origin of the fault
  • Informing affected parties
  • Restoring the work area
  • Completing relevant documentation 
    		•


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    An individual wishing to be assessed against this unit standard may apply to an assessor accredited by SETASA.

    Any training provider offering learning that will enable achievement of this unit standard must be registered and accredited by SETASA.

    Moderation of assessment will be done by SETASA in its ETQA capacity at its discretion 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Knowledge of the relationship between deviations, possible causes and solutions
  • Knowledge of the working, repair and adjustments of a display cartoning unit
  • Knowledge of the application of safety measures and associated risks relating to the maintenance of a display cartoning unit
  • Knowledge of the characteristics of materials which affect the product and display cartoning unit settings
  • Knowledge of the controls and functions of a display cartoning unit
  • Knowledge of appropriate lubricants and application thereof 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identifying and solving problems in which responses display that responsible decisions using critical and creative thinking have been made when determining the origin of the fault 

    UNIT STANDARD CCFO WORKING 
    Working effectively with others as a member of a team when determining the availability of machine spares 

    UNIT STANDARD CCFO ORGANISING 
    Organizing and managing oneself and one's activities responsibly and effectively when confirming the performance of the display cartoning unit 

    UNIT STANDARD CCFO COLLECTING 
    Collecting, analyzing, organizing and critically evaluating information when planning and preparing for maintenance 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicating effectively using visual, mathematical and/or language skills in the modes of oral and/or written persuasion when informing affected parties of the extent of maintenance 

    UNIT STANDARD CCFO SCIENCE 
    Using science and technology effectively and critically, showing responsibility towards the environment and health of others when performing maintenance 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrating an understanding of the world as a set of related systems by recognizing that problem-solving contexts do not exist in isolation when determining the origin of the fault 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Values
    All learners should demonstrate :

    An application of company ethics, values as well as general safety and customer care principles
    An awareness of expectations and obligations of basic worker / management relationships 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  49142   Further Education and Training Certificate: Cigarette Packaging Technology  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  AgriSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.