SAQA

All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.

SOUTH AFRICAN QUALIFICATIONS AUTHORITY

REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE:

Set up and operate drying facilities in wet processing area of veneer / plywood / block board plant

SAQA US ID	UNIT STANDARD TITLE
117310	Set up and operate drying facilities in wet processing area of veneer / plywood / block board plant
ORIGINATOR
SGB Wood Products
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-
FIELD			SUBFIELD
Field 01 - Agriculture and Nature Conservation			Forestry and Wood Technology
ABET BAND	UNIT STANDARD TYPE	PRE-2009 NQF LEVEL	NQF LEVEL	CREDITS
Undefined	Regular	Level 3	NQF Level 03	10
REGISTRATION STATUS		REGISTRATION START DATE	REGISTRATION END DATE	SAQA DECISION NUMBER
Passed the End Date - Status was "Reregistered"		2018-07-01	2023-06-30	SAQA 06120/18
LAST DATE FOR ENROLMENT		LAST DATE FOR ACHIEVEMENT
2024-06-30		2027-06-30

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.

This unit standard does not replace any other unit standard and is not replaced by any other unit standard.

PURPOSE OF THE UNIT STANDARD

This unit standard is for people who can set up and operate drying facilities in wet processing area of the veneer, block board and plywood manufacturing environment, whilst adhering to other agreed standards pertaining to performance, safety, quality, and the environment.

People credited with this unit standard are able to:

Collect and set up tools and equipment

Operate drying equipment

Carry out routine maintenance and lubrication of drying and ancillary handling equipment

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING

A Learner who wishes to enter a learning programme for this Unit Standard must be able to demonstrate:

i) Competency in mathematical and communication skills equivalent to that of a person who has qualified in these subjects at NQF Level 2;
ii) An understanding of the basic activities of the veneer and plywood manufacturing process and procedures of the relevant workplace;
iii) Knowledge and skills in the relevant workplace procedures, health and safety measures equivalent to NQF level 2 requirements.

UNIT STANDARD RANGE

a) The scope of this Unit Standard covers:

i) The environment, which can be described as the Wet Processing Area of a Veneer/Plywood/Block board Plant and specifically the drying area(s) of the Wet Processing Area. (Range = infeed deck, drier, veneer sheets, outfeed table and waste removal equipment and systems).
ii) All personnel involved in the activities in the Wet Processing Area.
iii) All material handled and processed into and from the Drying areas of the Wet Processing Area.
iv) All the prescribed work place procedures and safety, health and environmental management procedures relating to the drying process.
v) All prescribed routine set up, maintenance and lubrication procedures and schedules, tools and equipment used in drying systems.
vi) All the prescribed specifications for drying products.
vii) All prescribed product measuring and recording procedures, tools and standards.

b) The context of this Unit Standard relates to the training of a Learner in setting up and operating the drying facilities in the Wet Processing Area.

c) The Level assigned to this Unit Standard, i.e. Level 3, is appropriate because it entails the training of a novice in a veneer and plywood manufacturing environment and is a progression of the skills acquired from Levels 3 to 5.

Specific Outcomes and Assessment Criteria:

SPECIFIC OUTCOME 1

Collect and set up tools and equipment.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

The area is kept clean, neat and safe as per work instructions.

ASSESSMENT CRITERION 2

Personal protective equipment is utilised as per work instructions.

ASSESSMENT CRITERION 3

The availability of the required tools for setting up the drying facilities ensures successful execution of drying operations in the Wet Processing Area.

ASSESSMENT CRITERION 4

The correct tools for setting up the operation of the drying facilities are assembled timeously as per work instructions.

ASSESSMENT CRITERION 5

The drying facility is correctly set up and ensures that logs are converted into wet veneer products in the most efficient manner as per work instructions.

SPECIFIC OUTCOME 2

Operate drying equipment.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

The operation of the drying facilities is carried out in the prescribed manner as per work instructions.

ASSESSMENT CRITERION 2

The wet veneer is converted into dry veneer sheets as per quality specifications

ASSESSMENT CRITERION 3

The correct throughput and quality of dry veneer sheets is achieved as per production requirements.

SPECIFIC OUTCOME 3

Carry out routine maintenance and lubrication of drying and ancillary handling equipment.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

The correct routine maintenance and lubrication schedules are carried out timeously as per work instructions.

ASSESSMENT CRITERION 2

Routine maintenance and lubrication schedules and reports are correctly completed as per work instructions.

UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS

An individual who wishes to be assessed against this Unit Standard may apply to, or
inform, his immediate superior in the relevant workplace, to request management to
arrange for his / her assessment by the relevant assessor accredited for this purpose
by the ETQA of the FIETA. Accreditation for this Unit Standard shall be from the
relevant Education and Training Quality Assurer (FIETA ETQA) through formative
and summative assessment by a registered Assessor. Assessment should be
contextual and be conducted in the workplace as far as possible.

The relevant NSB and SGB should be notified of any feedback related to this qualification.

Assessors must be registered as an Assessor with the relevant ETQA

Moderators must be registered as assessors with the relevant ETQA

Training providers must be accredited by the relevant ETQA

Moderation should include both internal and external moderation where applicable

The FIETA ETQA will co-ordinate all moderation activities in accordance with their policies and procedures

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE

A demonstrated understanding of:

i. The setting up of primary log breakdown equipment and installation of appropriate cutting tools, to prescribed standards;
ii. The operation of primary log breakdown equipment and well as ancillary material handling equipment. (logs, sawn products, waste material);
iii. Maintaining product dimension and process throughput standards;
iv. The routine maintenance of primary log breakdown equipment as well ancillary materials handling equipment;
v. Competence in mathematical and communication skills equivalent to NQF Level 3;
vi. Competence in work procedures, safety and health measures, and environmental management principles equivalent to NQF Level 3;
viii. Knowledge of the correct assembly of set up and operation tools required for the drying facilities;
ix. Knowledge of the correct operating techniques for drying facilities in the Wet Processing area;
x. Knowledge of the correct throughput and quality control procedures for the drying facilities;
xi. Knowledge of the correct procedures for the routine maintenance and lubrication of drying facilities in the Wet Veneer Area;
xii. Knowledge of the correct set up procedures for the drying facilities.

UNIT STANDARD DEVELOPMENTAL OUTCOME

N/A

UNIT STANDARD LINKAGES

N/A

Critical Cross-field Outcomes (CCFO):

UNIT STANDARD CCFO IDENTIFYING

Solve problems and take decisions regarding the activities in the relevant work place of the Wet Veneer Area.

UNIT STANDARD CCFO WORKING

Work effectively and efficiently as a team member in this work area.

UNIT STANDARD CCFO ORGANISING

Assume full responsibility for all tools and instruments used in the drying area of the Wet Processing Area.

UNIT STANDARD CCFO COLLECTING

Collate and analyse data provided by the workers and report on this to the relevant responsible person.

UNIT STANDARD CCFO COMMUNICATING

Communicate effectively and efficiently as a team member in this work area.

UNIT STANDARD CCFO DEMONSTRATING

Lead the workers in the work area of the Wet Processing Area.

UNIT STANDARD CCFO CONTRIBUTING

Participate in carrying out the prescribed production programme /work plan for the specific work area of the Wet Processing Area.

Assist in training/coaching workers in the Wet Processing Area and discuss with them and the relevant responsible person all aspects of their activities in this work area.

UNIT STANDARD ASSESSOR CRITERIA

N/A

REREGISTRATION HISTORY

As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015.

UNIT STANDARD NOTES

Range of drying facilities = infeed deck, drier, outfeed table

The Outcomes that Learners achieve will be judged subject to these being achieved:

i) Within the standard time prescribed by the organisation;
ii) While following all the safety procedures required by the OSHACT and the workplace; and
iii) Strictly according to the organisation's work place procedures.

Values

The use of tasks and materials in the learning event plan should not discriminate against learners on any grounds prescribed in the Bill of Rights and Employment Equity Act and should promote the orientations outlined in the critical cross-field outcomes.

QUALIFICATIONS UTILISING THIS UNIT STANDARD:

	ID	QUALIFICATION TITLE	PRE-2009 NQF LEVEL	NQF LEVEL	STATUS	END DATE	PRIMARY OR DELEGATED QA FUNCTIONARY
Elective	49083	National Certificate: Wood Products Processing	Level 3	NQF Level 03	Passed the End Date - Status was "Reregistered"	2023-06-30	FPMSETA

PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD:

This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.

1.	AFRICAN MULTISKILLS DEVELOPMENT AND TRAINING
2.	ENB TRAINING SERVICEPTYLTD
3.	FUTURE DISCOVERY TRAINING ACADEMY
4.	TAMASA TRAINING PTY LTD
5.	TIRHANI SKILLSTRAINING PTY LTD
6.	VEB CELE & ASSOCIATES PTY LTD