SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Transfer composition from the compo room to vpo storage pots and supply to vpo on demand (side pots) 
SAQA US ID UNIT STANDARD TITLE
117249  Transfer composition from the compo room to vpo storage pots and supply to vpo on demand (side pots) 
ORIGINATOR
SGB Wood Products 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 1  NQF Level 01 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for people who can transfer composition from the compo room to VPO storage pots, whilst adhering to other agreed standards pertaining to performance, safety, quality, and the environment.

People credited with this unit standard are able to:
  • Continually supply compo to the VPO side pots
  • Control the quality of the compo 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    A Learner who wishes to enter a learning programme for this Unit Standard must be able to demonstrate:

    i) Competency in communication skills equivalent to that of a person who has qualified in these subjects at an ABET level 3;
    ii) An understanding of the basic activities of the match manufacturing production process in their workplace;
    iii) Knowledge and skills in the relevant workplace procedures, health and safety measures equivalent to NQF level 1 requirements. 

    UNIT STANDARD RANGE 
    a) The scope of the Unit Standard covers:

    i) The whole environment that can be described as match manufacturing.
    ii) All the personnel involved in all activities of match manufacturing.
    iii) All the material that is handled and processed in this work area of match manufacturing.
    iv) All the company's work procedures and safety regulations relating to this work area of match manufacturing.
    v) All the relevant OSHACT stipulations, which have bearing on, match manufacturing and all other activities in this work area.

    b) The context of the Unit Standard relates to the training of a Learner at NQF level 1 in the activity of match manufacturing.

    c) The level assigned to this Unit Standard, i.e. Level 1, is appropriate because it entails the training of a novice in match manufacturing is a progression of the skills acquired from Levels 1 to 4. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Continually supply compo to the VPO side pots. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Compo table transfer pots are filled with compo from the VPO storage pots during start up. 

    ASSESSMENT CRITERION 2 
    VPO side storage pots are filled with compo once all the compo table transfer pots have been filled as per work instructions. 

    ASSESSMENT CRITERION 3 
    VPO side pots are checked and filled with compo drawn from VPO storage pots or from compo room during the run as per work instructions. 

    ASSESSMENT CRITERION 4 
    VPO compo storage pots are checked and filled with compo from the compo room as per work instructions. 

    ASSESSMENT CRITERION 5 
    Batch pots are returned to the compo room for washing as per work instructions. 

    SPECIFIC OUTCOME 2 
    Control the quality of the compo. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Compo is stirred on vortex stirrer, before it is removed from the compo room as per work instructions. 

    ASSESSMENT CRITERION 2 
    "Out of specification" and/or unused compo is returned to the compo room for blending as instructed. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    An individual who wishes to be assessed against this Unit Standard may apply to, or inform, his immediate superior in the relevant workplace, to request management to arrange for his / her assessment by the relevant assessor accredited for this purpose by the ETQA of the FIETA. Accreditation for this Unit Standard shall be from the relevant Education and Training Quality Assurer (FIETA ETQA) through formative and summative assessment by a registered Assessor. Assessment should be contextual and be conducted in the workplace as far as possible.

    The relevant NSB and SGB should be notified of any feedback related to this qualification.
  • Assessors must be registered as an Assessor with the relevant ETQA
  • Moderators must be registered as assessors with the relevant ETQA
  • Training providers must be accredited by the relevant ETQA
  • Moderation should include both internal and external moderation where applicable
  • The FIETA ETQA will co-ordinate all moderation activities in accordance with their policies and procedures 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    A demonstrated understanding of:

    Match manufacturing principles and practical application in the match manufacturing environment, in addition with knowledge of Safety/Environmental/Health issues.

    i) Quality - ISO Awareness
    ii) Safe Work Procedures
    iii) Section 14
    iv) Production Processes 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems, using critical and creative thinking in the match manufacturing area. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organization or community in a production environment. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one's activities responsibly and effectively. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, clean, store and deliver tools and instruments utilized in his/her work area in an effective and efficient manner. 

    UNIT STANDARD CCFO COMMUNICATING 
  • Listen, understand instructions and verbally report in an effective manner to his/her superior.
  • Communicate effectively with team. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    The Outcomes that Learners achieve will be judged subject to these being achieved:

    i) Within the standard time prescribed by the organisation;
    ii) While following all the safety procedures required by the OSHACT and the workplace; and
    iii) Strictly according to the organisation's work instructions

    Values

    The use of tasks and materials in the learning event plan should not discriminate against learners on any grounds prescribed in the Bill of Rights and Employment Equity Act and should promote the orientations outlined in the critical cross-field outcomes. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  49082   GETC: Wood Products Processing  Level 1  NQF Level 01  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. ENB TRAINING SERVICEPTYLTD 
    2. FUTURE DISCOVERY TRAINING ACADEMY 
    3. Imara Umbono Incorporated (Pty) Ltd 
    4. Longata Consultant 
    5. MGS GCABA CONTRACTING & TRADING CC 
    6. Optimi Workplace 
    7. PINUS TECH TECHNOLOGIES TRADING AND PROJECTS 
    8. Silungokuhle (Pty) Ltd 
    9. TIRHANI SKILLSTRAINING PTY LTD 
    10. VEB CELE & ASSOCIATES PTY LTD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.