SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Operate flaker in the chipboard manufacturing process 
SAQA US ID UNIT STANDARD TITLE
117208  Operate flaker in the chipboard manufacturing process 
ORIGINATOR
SGB Wood Products 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  18 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for people who can operate a flaker to prepare flakes in the chipboard manufacturing process, whilst adhering to other agreed standards pertaining to performance, safety, quality, and the environment.

People credited with this unit standard are able to:
  • Prepare for and Start Up Flaker
  • Monitor the Flaker Performance
  • Stop Flaker and Change the Knife Rings 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    A Learner who wishes to enter a learning programme for this Unit Standard must be able to demonstrate:

    i) Competency in mathematical and communication skills equivalent to that of a person who has qualified in these subjects at ABET 3.
    ii) An understanding of the basic activities of the fibreboard and chipboard industry process and procedures of the relevant workplace.
    iii) Knowledge and skills in the relevant workplace procedures, health and safety measures equivalent to ABET level 3 requirements. 

    UNIT STANDARD RANGE 
    a) The scope of this Unit Standard covers:

    i. The environment which can be described as a fibreboard and chipboard manufacturing plant with all its equipment and the correct sequence of the production phases.
    ii. The raw materials processed and products produced by the operation.
    iii. Tthe people involved in the various workplaces.

    b) The context of this Unit Standard relates to the training of a Learner at NQF Level 2 in the fibreboard and chipboard manufacturing activity.

    c) The Level assigned to this Unit Standard, i.e. Level 2, is appropriate because it entails the training of a novice in a fibreboard and chipboard manufacturing environment and is a progression of the skills acquired from Levels 2 to 4. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Prepare for and Start Up Flaker. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The area is kept clean and safe at all times as per work instructions. 

    ASSESSMENT CRITERION 2 
    Personal protective safety equipment is utilised as per work instructions. 

    ASSESSMENT CRITERION 3 
    The flaker is prepared for start up by ensuring that the "de-isolation" procedure has been adhered to as per work instructions. 

    ASSESSMENT CRITERION 4 
    The flaker is started up as per work instructions. 

    SPECIFIC OUTCOME 2 
    Monitor the Flaker Performance. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The flakes are checked to ensure that they meet the specified quality requirements as per work instructions. 

    ASSESSMENT CRITERION 2 
    The flaker performance is monitored and arrangements are made for the changing of the knives as per work instructions. 

    ASSESSMENT CRITERION 3 
    Heavy parts are automatically dropped out and foreign materials are disposed of as per work instructions. 

    ASSESSMENT CRITERION 4 
    A record is kept detailing all the relevant activities during the flaker operation as per work instructions. 

    SPECIFIC OUTCOME 3 
    Stop Flaker and Change Knife Rings. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The signal is given to the relevant person to stop the flow of materials to the flaker as per work instructions. 

    ASSESSMENT CRITERION 2 
    The flaker is stopped using the correct sequence as per work instructions. 

    ASSESSMENT CRITERION 3 
    The machine is isolated as per work instructions. 

    ASSESSMENT CRITERION 4 
    The knife rings are changed strictly according to the procedure and the securing bolts are tightened correctly in accordance to the manufacturers specified settings. 

    ASSESSMENT CRITERION 5 
    The area is cleaned and kept safe at all times as per work instructions 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    An individual who wishes to be assessed against this Unit Standard may apply to, or inform, his immediate superior in the relevant workplace, to request management to arrange for his / her assessment by the relevant assessor accredited for this purpose by the ETQA of the FIETA. Accreditation for this Unit Standard shall be from the relevant Education and Training Quality Assurer (FIETA ETQA) through formative and summative assessment by a registered Assessor. Assessment should be contextual and be conducted in the workplace as far as possible.

    The relevant NSB and SGB should be notified of any feedback related to this qualification.
  • Assessors must be registered as an Assessor with the relevant ETQA
  • Moderators must be registered as assessors with the relevant ETQA
  • Training providers must be accredited by the relevant ETQA
  • Moderation should include both internal and external moderation where applicable
  • The FIETA ETQA will co-ordinate all moderation activities in accordance with their policies and procedures 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    A demonstrated understanding of:

    i. Ccommunication and mathematical skills equivalent to NQF Level 1 requirements;
    ii. Ffibreboard and chipboard operation. 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and verbally report problems detected in the production process to the relevant person(s). 

    UNIT STANDARD CCFO WORKING 
    Work effectively and efficiently as a team member. 

    UNIT STANDARD CCFO COLLECTING 
  • Collect and record data on the activities performed, for the relevant person/s as and when requested.
  • Deliver, collect, clean and store tools and instruments. 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    Listen and understand instructions and verbally report in an effective manner to the relevant person(s). 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Outcomes that Learners achieve will be judged subject to these being achieved:

    i) Within the standard time prescribed by the organisation;
    ii) While following all the safety procedures required by the OSHACT and the workplace; and
    iii) Strictly according to the organisation's work place procedures.

    Values

    The use of tasks and materials in the learning event plan should not discriminate against learners on any grounds prescribed in the Bill of Rights and Employment Equity Act and should promote the orientations outlined in the critical cross-field outcomes. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  49083   National Certificate: Wood Products Processing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. AFRICAN MULTISKILLS DEVELOPMENT AND TRAINING 
    2. ENB TRAINING SERVICEPTYLTD 
    3. FUTURE DISCOVERY TRAINING ACADEMY 
    4. TAMASA TRAINING PTY LTD 
    5. TIRHANI SKILLSTRAINING PTY LTD 
    6. VEB CELE & ASSOCIATES PTY LTD 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.