SAQA

All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.

SOUTH AFRICAN QUALIFICATIONS AUTHORITY

REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE:

Read and interpret instrumentation drawings

SAQA US ID	UNIT STANDARD TITLE
114624	Read and interpret instrumentation drawings
ORIGINATOR
SGB Engineering
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-
FIELD			SUBFIELD
Field 06 - Manufacturing, Engineering and Technology			Engineering and Related Design
ABET BAND	UNIT STANDARD TYPE	PRE-2009 NQF LEVEL	NQF LEVEL	CREDITS
Undefined	Regular	Level 3	NQF Level 03	4
REGISTRATION STATUS		REGISTRATION START DATE	REGISTRATION END DATE	SAQA DECISION NUMBER
Passed the End Date - Status was "Registered"		2004-04-07	2007-04-07	SAQA 0553/04
LAST DATE FOR ENROLMENT		LAST DATE FOR ACHIEVEMENT
2008-04-07		2011-04-07

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.

This unit standard does not replace any other unit standard and is not replaced by any other unit standard.

PURPOSE OF THE UNIT STANDARD

This unit standard is for persons in the Manufacturing Engineering and Technology field.

A person credited with this unit standard will be able to:

Select, interpret and analyse Instrumentation Drawings

Demonstrate knowledge of different types and applications of Instrumentation Drawings.

This unit standard will contribute to the full development of the learner within the Measurement Control and Instrumentation environment by providing recognition, further mobility and transportability within the field of Manufacturing Engineering and Technology. The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and upliftment within the Measurement Control and Instrumentation environment.

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING

The following knowledge, skills attitude and / or equivalent:

Induction to industry

Symbols and Abbreviations

Types of Drawings.

UNIT STANDARD RANGE

Instrumentation Drawings include, but are not limited to loop diagrams, process and instrumentation diagrams, flow diagrams, hook-ups and schematic diagrams.

Care of drawings include but is not limited to proper storage and ensuring drawings are relevant.

Specific Outcomes and Assessment Criteria:

SPECIFIC OUTCOME 1

Identify and select Instrumentation drawings.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Correctly differentiate between the different types of Measurement, Control and Instrumentation drawings.

ASSESSMENT CRITERION 2

The correct Measurement, Control and Instrumentation drawings are chosen according to the activity required.

ASSESSMENT CRITERION 3

The correct Measurement, Control and Instrumentation drawing is obtained using the drawing numbering system that is implemented in the workplace.

SPECIFIC OUTCOME 2

Demonstrate an understanding of Instrumentation drawings.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

The symbols and abbreviations on the Measurement, Control and Instrumentation drawings are correctly identified.

ASSESSMENT CRITERION 2

The purpose of Measurement, Control and Instrumentation and diagrams are correctly explained.

ASSESSMENT CRITERION 3

The Measurement, Control and Instrumentation drawing legends are correctly used to extract appropriate information from the drawing.

SPECIFIC OUTCOME 3

Interpret and use instrumentation drawings and diagrams.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

The physical equipment and control loops are correctly located as per the Measurement, Control and Instrumentation drawings.

ASSESSMENT CRITERION 2

The physical equipment and control loops are correctly verified and correspond to the Measurement, Control and Instrumentation drawings.

ASSESSMENT CRITERION 3

The activity is correctly completed by using the Measurement, Control and Instrumentation drawings.

ASSESSMENT CRITERION 4

The deviations from standards are accurately recorded and reported to the relevant personnel.

SPECIFIC OUTCOME 4

Care and Storage of Instrumentation Drawings.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Workshop procedures including house keeping practices according to statutory requirements.

ASSESSMENT CRITERION 2

Specific work site safety practices relating to the use of drawings.

ASSESSMENT CRITERION 3

Company quality standards.

UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS

Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.

Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA by SAQA.

Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines in the relevant qualification and the agreed ETQA procedures.

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE

Workshop procedures including house keeping practices according to statutory requirements.

Document Numbering and Storage Systems for Instrumentation Drawings.

Company quality standards.

UNIT STANDARD DEVELOPMENTAL OUTCOME

N/A

UNIT STANDARD LINKAGES

N/A

Critical Cross-field Outcomes (CCFO):

UNIT STANDARD CCFO IDENTIFYING

Identification and problem solving skills - faulty equipment identified and reported.

UNIT STANDARD CCFO WORKING

Work effectively with others - working under supervision.

UNIT STANDARD CCFO COMMUNICATING

Communication skills - reporting damaged or outdated Instrumentation Drawings and interpreting job requirements.

UNIT STANDARD ASSESSOR CRITERIA

N/A

UNIT STANDARD NOTES

Knowledge that will help me understand and that I will be able to explain:

Drawing numbering systems

Different types of drawings

To select different kind of drawings

Clean and keep drawings safe

Reporting of deviations from drawings

Update drawings

Storage of drawings

Damaged drawings are reported

Symbols and abbreviations

Legends and schedules

MC&I equipment

Locate physical equipment from drawing

Interpret drawing

QUALIFICATIONS UTILISING THIS UNIT STANDARD:

	ID	QUALIFICATION TITLE	PRE-2009 NQF LEVEL	NQF LEVEL	STATUS	END DATE	PRIMARY OR DELEGATED QA FUNCTIONARY
Core	48696	National Certificate: Measurement, Control and Instrumentation	Level 3	NQF Level 03	Passed the End Date - Status was "Reregistered"	2009-04-08	Was EWSETA until Last Date for Achievement
Core	74532	National Certificate: Measurement, Control and Instrumentation	Level 3	NQF Level 03	Passed the End Date - Status was "Reregistered"	2023-06-30	As per Learning Programmes recorded against this Qual

PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD:

This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.

NONE