All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |
SOUTH AFRICAN QUALIFICATIONS AUTHORITY |
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: |
Carry out basic gas welding, brazing and cutting in an electrical environment |
SAQA US ID | UNIT STANDARD TITLE | |||
114616 | Carry out basic gas welding, brazing and cutting in an electrical environment | |||
ORIGINATOR | ||||
SGB Electrical Engineering & Construction | ||||
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY | ||||
- | ||||
FIELD | SUBFIELD | |||
Field 12 - Physical Planning and Construction | Electrical Infrastructure Construction | |||
ABET BAND | UNIT STANDARD TYPE | PRE-2009 NQF LEVEL | NQF LEVEL | CREDITS |
Undefined | Regular | Level 2 | NQF Level 02 | 8 |
REGISTRATION STATUS | REGISTRATION START DATE | REGISTRATION END DATE | SAQA DECISION NUMBER | |
Passed the End Date - Status was "Reregistered" |
2007-04-03 | 2009-02-18 | SAQA 0160/05 | |
LAST DATE FOR ENROLMENT | LAST DATE FOR ACHIEVEMENT | |||
2010-02-18 | 2013-02-18 |
In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise. |
This unit standard is replaced by: |
US ID | Unit Standard Title | Pre-2009 NQF Level | NQF Level | Credits | Replacement Status |
258920 | Carry out basic gas welding, brazing and cutting in an electrical environment | Level 2 | NQF Level 02 | 8 |
PURPOSE OF THE UNIT STANDARD |
This unit standard is for persons in the Electrical Engineering; Generation; Distribution; Transmission, Construction and Renewable Energy Sector.
A person credited with this unit standard will be able to: This unit standard will contribute to the full development of the learner within the electrical engineering and construction environment by providing recognition, further mobility and transportability within the field of Physical Planning and Construction. The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and upliftment within the electrical infrastructure construction and engineering environment. |
LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING |
The following knowledge, skills attitude and / or equivalent:
|
UNIT STANDARD RANGE |
Gas welding, brazing and cutting includes the use of oxygen / acetylene equipment only. Gas welding is limited to:
Brazing is limited to mild steel only (maximum thickness of 3mm). Gas cutting is limited to mild steel only (maximum thickness of 6mm). Gas welding, brazing and cutting equipment includes, but is not limited to: Related materials include, but are not limited to: Safety equipment includes, but is not limited to: |
Specific Outcomes and Assessment Criteria: |
SPECIFIC OUTCOME 1 |
Prepare for gas welding, brazing or cutting. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The gas welding, brazing or cutting equipment and related materials are identified and each item's function described with reference to their inter-relationships. |
ASSESSMENT CRITERION 2 |
The applicable safety equipment is obtained and inspected as per safe work procedures and statutory requirements. |
ASSESSMENT CRITERION 3 |
The gas welding, brazing or cutting equipment is set up and checked for gas leaks and correct cylinder pressures according to safe work procedures and industry requirements. |
ASSESSMENT CRITERION 4 |
The relevant welding, brazing or cutting materials required for the task is ensured to be ready and available, and rods, flux and nozzles are selected to match the application. |
ASSESSMENT CRITERION 5 |
The gas cylinders are handled safely as per safe work procedures and industry requirements. |
ASSESSMENT CRITERION 6 |
Safety and proper workplace practices are maintained at all times. |
SPECIFIC OUTCOME 2 |
Apply basic gas welding techniques. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The appropriate personal protective equipment is worn throughout the operation as per safe work procedures. |
ASSESSMENT CRITERION 2 |
The oxygen and acetylene gas pressures on the regulator are correctly set for gas welding according to application requirements. |
ASSESSMENT CRITERION 3 |
The gas torch is lit up in the correct sequence and the gas mixture set as per safe work procedures and industry requirements. |
ASSESSMENT CRITERION 4 |
The joining of metals by means of basic gas welding is carried out and the correct nozzle positioning, movement and puddling are demonstrated according to application requirements. |
ASSESSMENT CRITERION 5 |
Safety and proper workshop practices are maintained at all times. |
ASSESSMENT CRITERION 6 |
The procedure for shutting down oxygen and acetylene on the torch and cylinders is demonstrated according to safe work procedures and industry requirements. |
SPECIFIC OUTCOME 3 |
Describe and demonstrate the brazing process. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The appropriate personal protective equipment is worn throughout the operation as per safe work procedures. |
ASSESSMENT CRITERION 2 |
The metal surface to be brazed is prepared according to application requirements. |
ASSESSMENT CRITERION 3 |
Brazing rods and fluxes are selected correctly for the particular application. |
ASSESSMENT CRITERION 4 |
The brazing nozzle is correctly selected and attached to the torch according to specific job requirements. |
ASSESSMENT CRITERION 5 |
The gas torch is lit up in the correct sequence and the gas mixture set as per safe work procedures and application requirements. |
ASSESSMENT CRITERION 6 |
The brazing of metals is carried out and nozzle position, movement and puddling are demonstrated according to application requirements. |
ASSESSMENT CRITERION 7 |
Safety and proper workshop practices are maintained at all times. |
ASSESSMENT CRITERION 8 |
The procedure for shutting down oxygen and acetylene on the torch and cylinders is demonstrated according to safe work procedures and industry requirements. |
SPECIFIC OUTCOME 4 |
Apply basic gas cutting process. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The appropriate personal protective equipment is worn throughout the operation as per safe work procedures. |
ASSESSMENT CRITERION 2 |
The oxygen and acetylene gas pressures on the regulator are correctly set for gas cutting according to application requirements. |
ASSESSMENT CRITERION 3 |
The gas cutting torch is lit up in the correct sequence and the gas mixture set as per safe work procedures and industry requirements. |
ASSESSMENT CRITERION 4 |
The metal is cut with the gas cutting torch and the nozzle position- and movement is demonstrated according to application requirements. |
ASSESSMENT CRITERION 5 |
Safety and proper workshop practices are maintained at all times. |
ASSESSMENT CRITERION 6 |
The procedure for shutting down oxygen and acetylene on the torch and cylinders is demonstrated according to safe work procedures and industry requirements. |
SPECIFIC OUTCOME 5 |
Conclude the task. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Hot metal surfaces are allowed to cool down as per safe work procedures. |
ASSESSMENT CRITERION 2 |
Gas cylinder valves are closed and gas pressure in the hoses released as per safe work procedures. |
ASSESSMENT CRITERION 3 |
Gas welding, brazing or cutting equipment and materials are correctly stored as per applicable safety standards. |
ASSESSMENT CRITERION 4 |
The work area is cleaned and waste materials disposed of according to local housekeeping standards. |
ASSESSMENT CRITERION 5 |
Safety equipment is cleaned and stored according to statutory requirements. |
UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS |
UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE |
UNIT STANDARD DEVELOPMENTAL OUTCOME |
N/A |
UNIT STANDARD LINKAGES |
N/A |
Critical Cross-field Outcomes (CCFO): |
UNIT STANDARD CCFO IDENTIFYING |
Identify and solve problems in selecting, using and caring of gas welding, brazing and cutting equipment. |
UNIT STANDARD CCFO WORKING |
Work effectively and safety conscious during the presence of others while carrying out gas welding, brazing and cutting. |
UNIT STANDARD CCFO ORGANISING |
Organise and manage oneself in the selection of the appropriate gas welding, brazing and cutting equipment, related materials and setting up of the task. |
UNIT STANDARD CCFO COMMUNICATING |
Communicate with bystanders regarding the effect that a bright gas flame has on the eyes and the dangers of sparks created by gas welding or cutting. |
UNIT STANDARD CCFO DEMONSTRATING |
Critically evaluate the quality of the welding joints, brazed areas and cut metals while carrying out the task. |
UNIT STANDARD ASSESSOR CRITERIA |
N/A |
UNIT STANDARD NOTES |
This unit standard has been replaced by unit standard 258920, which is "Carry out basic gas welding, brazing and cutting in an electrical environment", Level 2, 8 credits.
Specified requirements Specified requirements include legal and legislative specific requirements and are contained in one or more of the following documents: |
QUALIFICATIONS UTILISING THIS UNIT STANDARD: |
ID | QUALIFICATION TITLE | PRE-2009 NQF LEVEL | NQF LEVEL | STATUS | END DATE | PRIMARY OR DELEGATED QA FUNCTIONARY | |
Elective | 49773 | National Certificate: Construction and Maintenance of Overhead Track Equipment | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | TETA |
Elective | 48473 | National Certificate: Electrical Engineering | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2009-02-18 | Was EWSETA until Last Date for Achievement |
Elective | 58269 | National Certificate: Electro-Mechanics | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 58268 | National Certificate: Lift Installation and Maintenance | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 49068 | National Certificate: Railway Signalling: Assembly and Wiring of Equipment | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | TETA |
PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: |
This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here. |
1. | Palesa Rail Academy |
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |