SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Clean production support units 
SAQA US ID UNIT STANDARD TITLE
114154  Clean production support units 
ORIGINATOR
SGB Secondary Agriculture: Processing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Secondary Agriculture 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  4 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
A learner who has achieved this unit standard will be competent in:
  • Cleaning production support units to ensure readiness for production. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    To enter a learning programme for this unit standard or to be assessed against this unit standard, the learner is assumed to have :
  • Literacy and numeracy at NQF level 1.
  • Knowledge of the application of quality control during tobacco processingIntroduction to the Tobacco Processing Industry. 
    		•

    UNIT STANDARD RANGE 
    The learner is expected to perform the specific outcomes as reflected in this unit standard with minimal supervision, but with access to work site procedures and cleaning instructions.

    The scope of this unit standard deals with the cleaning of production support units to ensure readiness for production.

    Production support units include, but are not limited to:
    1. Vibratory feeders and conveyor belts
    2. Stem roller unit
    3. Bulking silos
    4. Cutrag bin filler
    5. Vibro-cooler
    6. Dosing and weighing belt unit
    7. Feeders

    Although the learner is expected to perform the specific outcomes as reflected in this unit standard on all of the above-mentioned support units, assessment will be conducted on any two of the production support units as chosen by the assessor. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Prepare for cleaning of production support unit. 
    OUTCOME NOTES 
  • Locking out unit according to safety and work site procedures.
  • Accessing the unit according to work site procedures.
  • Removing tobacco from the unit according to work site procedures.
  • Obtaining cleaning utensils required according to work site procedures. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Consequences are explained in the event of not:
  • Using correct cleaning utensils.
  • Accessing the unit.
  • Inspecting applicable machine components.
  • Following cleaning procedures.
  • Reporting deviations.

    The purpose of the following are explained:
  • Locking out the unit.
  • Closing up the unit.
  • Unlocking the unit. 
    		•

    SPECIFIC OUTCOME 2 
    Perform cleaning of production support unit. 
    OUTCOME NOTES 
  • Following cleaning process according to work site procedures.
  • Inspecting applicable machine components according to work site procedures.
  • Reporting deviations according to work site procedures. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Consequences are explained in the event of not:
  • Using correct cleaning utensils.
  • Accessing the unit.
  • Inspecting applicable machine components.
  • Following cleaning procedures.
  • Reporting deviations.

    The purpose of the following are explained:
  • Locking out the unit.
  • Closing up the unit.
  • Unlocking the unit. 
    		•

    SPECIFIC OUTCOME 3 
    Complete cleaning process. 
    OUTCOME NOTES 
  • Closing up the unit according to work site procedures.
  • Unlocking the unit according to safety and work site procedures.
  • Restoring the work area according to work site procedures. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Consequences are explained in the event of not:
  • Using correct cleaning utensils.
  • Accessing the unit.
  • Inspecting applicable machine components.
  • Following cleaning procedures.
  • Reporting deviations.

    The purpose of the following are explained:
  • Locking out the unit.
  • Closing up the unit.
  • Unlocking the unit. 
    		•


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    1. An individual wishing to be assessed against this unit standard may apply to an assessor accredited by SETASA.

    2. Any training provider offering learning that will enable achievement of this unit standard must be registered and accredited by SETASA.

    3. Moderation of assessment will be done by SETASA in its ETQA capacity at its discretion. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Knowledge of accessing and closing up production support units.
  • Knowledge of identifying worn machine parts.
  • Knowledge of the application of safety measures relating to the cleaning of production support units. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identifying and solving problems in which responses display that responsible decisions using critical and creative thinking have been made when detecting worn components during clean-up. 

    UNIT STANDARD CCFO WORKING 
    Working effectively with others as a member of a team when co-ordinating and performing cleaning operations. 

    UNIT STANDARD CCFO ORGANISING 
    Organizing and managing oneself and one`s activities responsibly and effectively when acquiring cleaning equipment. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicating effectively using language skills in the modes of oral and/or written persuasion when reporting deviations. 

    UNIT STANDARD CCFO SCIENCE 
    Using science and technology effectively and critically, showing responsibility towards the environment and health of others when performing cleaning activities. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Values

    All learners should demonstrate :
  • An application of company ethics, values as well as general safety and customer care principles.
  • An awareness of expectations and obligations of basic worker / management relationships. 
    		•

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  48637   National Certificate: Tobacco Production  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  AgriSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Afgri Operations (Pty) Ltd 
    2. Mobile Agri Skills Development and Training NPC 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.