SAQA

All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.

SOUTH AFRICAN QUALIFICATIONS AUTHORITY

REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE:

Fault Find, Test and Repair Domestic Appliances

SAQA US ID	UNIT STANDARD TITLE
10268	Fault Find, Test and Repair Domestic Appliances
ORIGINATOR
SGB Electrical Engineering & Construction
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-
FIELD			SUBFIELD
Field 12 - Physical Planning and Construction			Electrical Infrastructure Construction
ABET BAND	UNIT STANDARD TYPE	PRE-2009 NQF LEVEL	NQF LEVEL	CREDITS
Undefined	Regular	Level 3	NQF Level 03	6
REGISTRATION STATUS		REGISTRATION START DATE	REGISTRATION END DATE	SAQA DECISION NUMBER
Passed the End Date - Status was "Reregistered"		2007-04-03	2009-02-18	SAQA 0160/05
LAST DATE FOR ENROLMENT		LAST DATE FOR ACHIEVEMENT
2010-02-18		2013-02-18

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.

This unit standard is replaced by:

US ID	Unit Standard Title	Pre-2009 NQF Level	NQF Level	Credits	Replacement Status
258924	Fault Find, Test and Repair Domestic Appliances	Level 3	NQF Level 03	6

PURPOSE OF THE UNIT STANDARD

This unit standard is for persons in the Electrical Engineering; Generation; Distribution; Transmission, Construction and Renewable Energy Sector .

A person credited with this unit standard will be capable of:
Fault find, test and repair domestic appliances.

This unit standard will contribute to the full development of the learner within the electrical engineering and construction environment by providing recognition, further mobility and transportability within the field of Physical Planning and Construction. The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and upliftment within the electrical engineering and construction environment.

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING

Safety precautions when working on live electrical equipment

Single phase motors and control gear, heating elements and controls, test instruments, circuit / wiring diagrams and function of components.

UNIT STANDARD RANGE

Repairing small appliances, stoves, washing machines, tumble driers geysers, heaters and dishwashers. Repairs are done in accordance with manufacturer`s manual.

Specific Outcomes and Assessment Criteria:

SPECIFIC OUTCOME 1

Plan to do fault finding and repair to domestic appliances.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Appropriate plans and circuit diagrams for the appliance to be worked on are selected.

ASSESSMENT CRITERION 2

2. Circuit diagrams are interpreted according to specified task.

ASSESSMENT CRITERION 3

3. Component function in circuit is interpreted according to manufacturer's specifications.

ASSESSMENT CRITERION 4

4. Tools and test instruments to be used are selected according to specified task.

SPECIFIC OUTCOME 2

Conduct fault finding and testing of domestic appliances.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Appliance are inspected for visible damages.

ASSESSMENT CRITERION 2

2. Appliances are tested in correct sequence.

ASSESSMENT CRITERION 3

3. Faults are located and corrective action identified with the aid of wiring diagrams.

ASSESSMENT CRITERION 4

4. Circuits are checked for loose or broken connections according to worksite procedures.

SPECIFIC OUTCOME 3

Repair domestic appliances.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Appropriate tools are used to remove faulty components.

ASSESSMENT CRITERION 2

2. Components are selected and replaced according to manufacturer's specifications.

ASSESSMENT CRITERION 3

3. Appliances are checked for correct assembly according to maintenance procedures.

ASSESSMENT CRITERION 4

4. Earth continuity conductor is checked and secured as per statutory requirements.

SPECIFIC OUTCOME 4

Conclude appliance repair.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Repaired appliance is tested for correct operation.

ASSESSMENT CRITERION 2

2. Replacement / rewiring is recommended according to quality requirements.

ASSESSMENT CRITERION 3

3. Appliance is cleaned before approving it for service.

ASSESSMENT CRITERION 4

4. Tools and test instruments are cleaned and stored according to statutory requirements.

UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS

Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.

Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA by SAQA.

Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines in the relevant qualification and the agreed ETQA procedures.

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE

Types of appliances

Names, locations and functions of appropriate tools

Safety related to each tool

Care and storage of tools

Critical Cross-field Outcomes (CCFO):

UNIT STANDARD CCFO IDENTIFYING

Understand the world as a set of related systems.

Identify and solve problems (identification of defects and faults).

UNIT STANDARD CCFO WORKING

Work effectively with others (during testing of appliances).

UNIT STANDARD CCFO ORGANISING

Organize and manage oneself (fault finding and identification).

UNIT STANDARD CCFO COLLECTING

Collect, analyse, organise and critically evaluate information (during repairs).

UNIT STANDARD CCFO COMMUNICATING

Communicate (reporting of defects).

UNIT STANDARD CCFO SCIENCE

Use science and technology (environmental and personal safety).

UNIT STANDARD NOTES

This unit standard has been replaced by unit standard 258924, which is "Fault Find, Test and Repair Domestic Appliances", Level 3, 6 credits.

This Unit Standard was originally registered on 12 June 2002 under SAQA decision number 0742/02. It has been re-registered on 11 February 2004 under SAQA 2552/04.

SPECIFIED REQUIREMENTS:

Specified requirements include legal and legislative specific requirements and are contained in one or more of the following documents:
Manufacturer`s manuals

QUALIFICATIONS UTILISING THIS UNIT STANDARD:

	ID	QUALIFICATION TITLE	PRE-2009 NQF LEVEL	NQF LEVEL	STATUS	END DATE	PRIMARY OR DELEGATED QA FUNCTIONARY
Core	49056	National Certificate: Domestic Appliance Repair	Level 3	NQF Level 03	Passed the End Date - Status was "Reregistered"	2023-06-30	EWSETA
Elective	48475	National Certificate: Electrical Engineering	Level 3	NQF Level 03	Passed the End Date - Status was "Reregistered"	2009-02-18	Was EWSETA until Last Date for Achievement
Elective	20419	National Certificate: Electrical Engineering	Level 3	NQF Level 03	Passed the End Date - Status was "Registered"	2004-02-10	Was EWSETA until Last Date for Achievement

PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD:

This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.

NONE