SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Conduct workplace Occupational Health and Safety (OHS) inspections 
SAQA US ID UNIT STANDARD TITLE
259619  Conduct workplace Occupational Health and Safety (OHS) inspections 
ORIGINATOR
SGB Occupational Health and Safety 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 09 - Health Sciences and Social Services Preventive Health 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  3 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2026-06-30   2029-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
115101  Address workplace hazards and risks  Level 2  NQF Level 02  4   

PURPOSE OF THE UNIT STANDARD 
The person credited with this unit standard will be able to understand the legislation that applies to occupational health and safety; the impact that non-compliance would have in the workplace and understand the inspection protocols applicable to the workplace. Learners will also be able to carry out physical inspections and record, report and deal with the results of the inspection in order to implement corrective and preventative actions.

The qualifying learner is capable of:
  • Explaining the relevant legal requirements to conduct Occupational Health and Safety (OHS) inspections.
  • Planning Occupational Health and Safety (OHS) inspections.
  • Conducting inspections to identify non-compliance in the workplace.
  • Reporting on Occupational Health and Safety (OHS) inspections. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Learners accessing this qualification will have demonstrated competence in:
  • Communication at NQF Level 1 or equivalent.
  • Mathematical Literacy at NQF Level 1 or equivalent. 
    		•

    UNIT STANDARD RANGE 
    The relevant OHS governance pertains to the learner's specific work environment and area of responsibility. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Explain the relevant legal requirements to conduct Occupational Health and Safety (OHS) inspections. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Relevant legislation applicable to the workplace is analysed in order to ensure compliance to legal requirements. 

    ASSESSMENT CRITERION 2 
    Information and training required is described in terms of meeting legal requirements for OHS inspections. 

    ASSESSMENT CRITERION 3 
    The impact on the organisation of non-compliance is explained in terms of possible consequences to both employer and employees. 

    SPECIFIC OUTCOME 2 
    Plan Occupational Health and Safety (OHS) inspections. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Workplace environment is explained in terms of specific inspection requirements. 

    ASSESSMENT CRITERION 2 
    Relevant documentation including previously identified hazards and risks is obtained and completed in accordance with legislative and organisational requirements. 

    ASSESSMENT CRITERION 3 
    Inspection protocols are explained in accordance with legislative and organisational requirements. 
    ASSESSMENT CRITERION RANGE 
    Inspection protocols may include but are not limited to roleplayers, Personal Protective Equipment, methodology, time frames, administration, logistics and communication.
     

    SPECIFIC OUTCOME 3 
    Conduct inspections to identify non-compliance in the workplace. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Physical inspection is carried out in order to determine potential hazards and associated risks. 

    ASSESSMENT CRITERION 2 
    Inspection findings are recorded in a written format in order to ensure corrective and preventative action is implemented. 

    ASSESSMENT CRITERION 3 
    The criticality of the risks is assessed in order to determine the time frame required to implement corrective and preventative actions. 

    SPECIFIC OUTCOME 4 
    Report on Occupational Health and Safety (OHS) inspections. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    An official Occupational Health and Safety (OHS) written report is generated and presented in accordance with inspection protocols. 

    ASSESSMENT CRITERION 2 
    Critical non-compliance issues are highlighted and addressed immediately in line with the requirements of the risk matrix. 

    ASSESSMENT CRITERION 3 
    Corrective and preventative actions are followed-up on in accordance with legal and organisational requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An individual wishing to be assessed (including through RPL) against this unit standard may apply to an assessment agency, assessor or provider institution accredited by the relevant ETQA or an ETQA that has a Memorandum of Understanding in place with the relevant ETQA.
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA or an ETQA that has a Memorandum of Understanding in place with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard or assessing this unit standard must be accredited as a provider with the relevant ETQA or an ETQA that has a Memorandum of Understanding in place with the relevant ETQA.
  • Moderation of assessment will be conducted by the relevant ETQA at its discretion. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Knowledge and understanding of workplace hazards and risks. 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems related to the non-compliance of health and safety situations in the workplace. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others in ways that ensure all stakeholders work towards creating a safe working environment. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one's activities so that they contribute to the health and safety of all persons in the workplace. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information which may have an impact on any and all health and safety situations within the workplace. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively with all stakeholders on the requirements and results of an Occupational Health and Safety inspection. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology to assist in the recording and reporting of health and safety situations in the workplace. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems where poor or no inspections of workplace Occupational Health and Safety hazards and risks can have a negative impact on all stakeholders. 

    UNIT STANDARD CCFO CONTRIBUTING 
    In order to contribute to the full personal development of each learner and the social and economic development of society at large, it must be the intention underlying any programme of learning to make an individual aware of the importance of:
  • Participating as responsible citizens in the life of local, national and global communities in Occupational Health and Safety issues. 
    		•

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 115101, "Address workplace hazards and risks", Level 2, 4 credits.

    Acronyms:
  • OHS: Occupational Health and Safety.

    Terminology:

    "Specified requirements" include legal and site-specific requirements and are contained in the following documents.

    Legal:
  • Relevant current legislation, regulations and directives pertaining to mining and occupational health and safety.
  • Mandatory Codes of Practice.
  • South African National Standards and other relevant Standards.

    Site Specific:
  • Hazard Identification and Risk Assessments (HIRA).
  • Occupational Health and Safety Risk Management Programme.
  • Managerial Instructions.
  • Organisational Standard Procedures.
  • List of Recorded OHS Risks.
  • Working Guides.
  • Equipment and Materials Specifications.
  • Acceptable subject related theory. 
    		•

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  74269   National Certificate: Occupational Health, Safety and Environment  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2023-07-30  As per Learning Programmes recorded against this Qual 
    Core  64829   National Certificate: Lifting Machine Operations  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  TETA 
    Core  90656   National Certificate: Mine Ventilation  Not Applicable  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MQA 
    Elective  66312   National Certificate: Lumber Milling  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  FPMSETA 
    Elective  65510   National Certificate: Piano Restoration  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  CATHSSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. AAH Skills and Development 
    2. AETA Training Solutions 
    3. AFRICAN MULTISKILLS DEVELOPMENT AND TRAINING 
    4. Akane Training Academy 
    5. Alika Investment CC 
    6. Amandlolwazi Training Centre Pty Ltd 
    7. ASSURED VOCATIONAL SKILLS INSTITUTE PTY LTD 
    8. Bev Short Training Consultants 
    9. BJS FORKLIFTS TRAINING 
    10. Cathy Hill Solutions (Pty) Ltd 
    11. Certified Training Solutions (PTY) Ltd 
    12. Certified Training Solutions PTY Ltd 
    13. COALITION TRADING 1238 CC 
    14. Dee's Training (PTY) LTD 
    15. DELAR SHEQ 
    16. Diversity technology Training Institute 
    17. DQ Staffing Solutions 
    18. Educon Training and Development PTY LTD 
    19. ESS Holdings (PTY) Ltd 
    20. Excellect 209 (PTY) LTD 
    21. Excellect 209 PTY LTD 
    22. Exclusive Training and Services 
    23. Exclusive Training Services 
    24. FUTURE DISCOVERY TRAINING ACADEMY 
    25. Global Learning Services 
    26. He and She Driver Training Centre 
    27. Inkqubela Consultants 
    28. Intellect Management & Training consultancy 
    29. JBenviroservices 
    30. Jerico Training and Fire Industries 
    31. KDS Centre for Skills Development and Training Pty Ltd 
    32. kholwa management and training consultancy (pty) Ltd 
    33. Kriel Training (PTY) LTD 
    34. Learning Exchange Pty (Ltd) 
    35. Legal Environment Safety & Health Requirements cc 
    36. Little Treehouse Holdings (PTY) Ltd 
    37. Marholeni M Trading Enterprize 
    38. Mphatlalatsane Learning Resources 
    39. MUKWEVHO TRAINING AND DEVELOPMENT 
    40. OHS Legislative Training CC 
    41. Phephani Learnerships cc 
    42. Precision skills development and training 
    43. Protrain Solutions 
    44. Quantum Leap College Pty Ltd 
    45. Renntek Pty Ltd 
    46. Safety Haz Training (PTY) Ltd 
    47. Seng''khona Trading Enterprise 129 cc 
    48. SINOVUYOLETHU TRADING PTY LTD 
    49. Staffing Logistics 
    50. Striving Mind Academy and Consultancy Pty Ltd 
    51. The Assessment Zone (Pty) Ltd 
    52. The Skills Authority 
    53. Tinotel Communications 
    54. TIRHANI SKILLSTRAINING PTY LTD 
    55. Transvaal Legislative Training 
    56. Transvaal Training 
    57. Various Aligned Safety And Training 
    58. VEB CELE & ASSOCIATES PTY LTD 
    59. Wheelman S A 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.