All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |
SOUTH AFRICAN QUALIFICATIONS AUTHORITY |
REGISTERED QUALIFICATION: |
Occupational Certificate: Fabricated Glazing Solution Installer |
SAQA QUAL ID | QUALIFICATION TITLE | |||
118112 | Occupational Certificate: Fabricated Glazing Solution Installer | |||
ORIGINATOR | ||||
Development Quality Partner-CHIETA | ||||
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY | NQF SUB-FRAMEWORK | |||
- | OQSF - Occupational Qualifications Sub-framework | |||
QUALIFICATION TYPE | FIELD | SUBFIELD | ||
Occupational Certificate | Field 12 - Physical Planning and Construction | Building Construction | ||
ABET BAND | MINIMUM CREDITS | PRE-2009 NQF LEVEL | NQF LEVEL | QUAL CLASS |
Undefined | 397 | Not Applicable | NQF Level 03 | Regular-ELOAC |
REGISTRATION STATUS | SAQA DECISION NUMBER | REGISTRATION START DATE | REGISTRATION END DATE | |
Registered | EXCO 0522/24 | 2021-03-25 | 2025-12-31 | |
LAST DATE FOR ENROLMENT | LAST DATE FOR ACHIEVEMENT | |||
2026-12-31 | 2029-12-31 |
In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise. |
This qualification does not replace any other qualification and is not replaced by any other qualification. |
PURPOSE AND RATIONALE OF THE QUALIFICATION |
Purpose:
This qualification prepares a learner to operate a Fabricated Glazing Solution Installer. A Fabricated Glazing Solution Installer fabricates and installs made-to-order glazing solutions. A qualified learner will be able to: Rationale: This qualification is one of a suite of qualifications in the glazing industry. It is aimed at learners who wish to pursue their careers as Fabricated Glazing Solution Installers. The qualification is aimed at providing standardised training for Fabricated Glazing Solution Installers with the architectural and construction industry. The range of typical learners that will enter this qualification are new entrants, both employed and unemployed, who would like to gain access opportunities for further skills development in the glazing industry. Upon completion of the qualification, learners will be able to prepare for the installation of fabricated glazing solution, install fabricated glazing solutions, perform post installation operations. This qualification will benefit learners by providing them with skills that will enhance their employment opportunities or to run their own businesses with well-structured, relevant and current competencies. Qualified learners will be able to advance their careers by enrolling for higher level qualifications that will empower and capacitate them for higher level responsibilities in technical and managerial fields within the glazing industry. Sectoral needs such as glazing services for domestic, commercial and industrial purposes will be addressed by qualified and competent Fabricated Glazing Solution Installers. The overall benefits for the economy would include contribution to employment opportunities and the establishing of a wide skills base indispensable for future growth in the architectural and building sectors. |
LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING |
Recognition of Prior Learning (RPL):
RPL for access to the External Integrated Summative Assessment: Accredited providers and approved workplaces must apply the internal assessment criteria specified in the related curriculum document to establish and confirm prior learning. Accredited providers and workplaces must confirm prior learning by issuing a statement of results or certifying a work experience record. RPL for access to the Qualification: Accredited providers and approved workplaces may recognise prior learning against the relevant access requirements. Entry Requirements: The minimum entry requirement for this qualification is: |
RECOGNISE PREVIOUS LEARNING? |
Y |
QUALIFICATION RULES |
This qualification consists of the following compulsory Knowledge, Practical Skill and Work Experience Modules:
Knowledge Modules: Total number of credits for Knowledge Modules: 106. Practical Skill Modules: Total number of credits for Practical Skill Modules: 168. Work Experience Modules: Total number of credits for Work Experience Modules: 123. |
EXIT LEVEL OUTCOMES |
1. Plan and prepare for the installation of fabricated glazing solutions.
2. Perform fabricated glazing solutions installation operations according to specifications. 3. Repair and/or replace fabricated glazing solutions according to specifications. 4. Perform post glazing operations. |
ASSOCIATED ASSESSMENT CRITERIA |
Associated Assessment Criteria for Exit Level Outcome 1:
Associated Assessment Criteria for Exit Level Outcome 2: Associated Assessment Criteria for Exit Level Outcome 3: Associated Assessment Criteria for Exit Level Outcome 4: Integrated Assessment: Integrated Formative Assessment: The skills development provider will use the curriculum to guide them on the stipulated internal assessment criteria and weighting. They will also apply the scope of practical skills and applied knowledge as stipulated by the internal assessment criteria. This formative assessment leads to entrance into the integrated external summative assessment. Integrated Summative Assessment: An external Integrated Summative Assessment, conducted through the relevant QCTO Assessment Quality Partner is required for the issuing of this qualification. The external integrated summative assessment will focus on the Exit Level Outcomes and Associated Assessment Criteria. |
INTERNATIONAL COMPARABILITY |
The South African Fabricated Glazing Solution Installer qualification was compared with glazing qualifications offered in New Zealand and Australia.
The two countries were selected based on their similarities with the South African National Qualifications Framework. Comparison was done against knowledge and practical skills in relation to entry level, scope, NQF levels, duration, typical learners and credits. New Zealand: New Zealand has a suite of glass related qualifications ranging from Level 2 to 4. These are the National Certificate in Glass and Glazing, Level 2, with 52 Credits, ID No. 0997; National Certificate in Glass, Level 3, 65 Credits, ID No. 2944; National Certificate in Glazing, Level 4, with credits ranging between 103-133 Credits, ID No. 2945 and the New Zealand Certificate in Glass Processing, Level 4, with credits ranging between 72-78, ID No. 2946, which is offered by the Glass and Glazing Institute, Lower Hutt. Comparison to the South African Fabricated Glazing Solution Installer qualification has been done against the National Certificate in Glazing, Level 4, 103-133 credits, ID No. 2945. This qualification has three strands, these being residential, commercial and frameless glazing. Unit standards covered in this qualification, which were found to be covered in the form of modules in the South African Fabricated Glazing Solution Installer qualification, included competencies and knowledge for: Application codes of practice, knowledge of industry standards and relevant regulations to the installation of glass items, application of specifications, sketches and plans to support the installation of glass items, cutting flat glass and optimisation of procurement, materials and work methods to produce glass items expected in a commercial environment. Qualified learners can operate as supervisors of glazing installation projects or as technical or sales representatives, specific to their chosen area of specialisation (i.e. residential, commercial and frameless) within a variety of sectors. Australia: Australia has a skill set called Insulating Glass Unit Fabricator /Installer, ID No. MSF SS00003, which is offered Holmesglen Institute, Chadstone. This skill set covers units that are covered in the South African Fabricated Glazing Solution Installer qualification. Units covered included amongst others: apply quality standards; fabricate and assemble frames; fabricate and install commercial glazing; fabricate and install residential windows and doors. Similarities: Similarities have been found in relation to content covered in the suite of qualifications offered in both countries. At entry level learners are exposed to knowledge and skills related to health and safety requirements, tools and materials, quality requirements and legislative requirements. At Level 3, learners gain knowledge and skills related to basic glazing and glass processing requirements. Upon completion of Level 3 qualifications, learners can operate with minimum supervision as glass workers. They can communicate with fellow workers and customers, prepare the glazing site for operation, calculate, order and receive materials. At Level 4, learners can undertake glazing projects unsupervised. In addition to the execution of technical glazing processes, Level 4 learners can calculate the required glazing materials, price the glazing project, order the required materials and invoice glazing projects. Upon completion of this qualification, learners can exit their learning to pursue employment or entrepreneurial opportunities. Learners can re-enter the qualification to complete their learning to achieve the artisan status. The same has been noted with each New Zealand and Australian qualifications. Upon completion of each qualification, learners can gain employment within the glass and glazing industry, based on the specific strand of their choice. Conclusion: The South African Fabricated Glazing Solution Installer qualification compares favourably with qualifications offered in the two countries selected for this comparison in terms of scope, complexity and typical learners. |
ARTICULATION OPTIONS |
This qualification allows possibilities for both vertical and horizontal articulation.
Horizontal Articulation: Vertical Articulation: |
MODERATION OPTIONS |
N/A |
CRITERIA FOR THE REGISTRATION OF ASSESSORS |
N/A |
NOTES |
Qualifying for External Assessment:
To qualify for an external assessment, learners must provide proof of completion of all required modules by means of statements of results and work experience records. Additional legal or physical entry requirements: None. Criteria for the accreditation of providers: Accreditation of providers will be done against the criteria as reflected in the relevant curriculum on the QCTO website. The curriculum title and code are: Fabricated Glazing Solution Installer: 642501-000-01-04. Encompassed Trades: This qualification encompasses the following trades as recorded on the NLRD: Assessment Quality Partner (AQP): Related Parent Qualification: |
LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION: |
NONE |
PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION: |
This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here. |
NONE |
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |