SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED QUALIFICATION: 

Bachelor of Engineering Technology in Electrical Engineering 
SAQA QUAL ID QUALIFICATION TITLE
104530  Bachelor of Engineering Technology in Electrical Engineering 
ORIGINATOR
Central University of Technology, Free State 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY NQF SUB-FRAMEWORK
CHE - Council on Higher Education  HEQSF - Higher Education Qualifications Sub-framework 
QUALIFICATION TYPE FIELD SUBFIELD
National First Degree  Field 12 - Physical Planning and Construction  Electrical Infrastructure Construction 
ABET BAND MINIMUM CREDITS PRE-2009 NQF LEVEL NQF LEVEL QUAL CLASS
Undefined  360  Not Applicable  NQF Level 07  Regular-Provider-ELOAC 
REGISTRATION STATUS SAQA DECISION NUMBER REGISTRATION START DATE REGISTRATION END DATE
Registered  EXCO 0324/24  2024-07-01  2027-06-30 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2028-06-30   2033-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This qualification does not replace any other qualification and is not replaced by any other qualification. 

PURPOSE AND RATIONALE OF THE QUALIFICATION 
Purpose:
The purpose of the Bachelor of Engineering Technology in Electrical Engineering is to prepare learners with the knowledge, skills, and applied competencies required to function as engineering technologists in the electrical engineering sector. The qualification is aimed at learners who have completed the appropriate school qualifications in mathematics and science or those articulating from related higher certificates or diplomas in electrical engineering. Learners will benefit from this qualification by gaining specialised theoretical knowledge and practical engineering capabilities that enable them to participate effectively in the design, operation, maintenance, and improvement of electrical systems used in sectors such as energy, manufacturing, transport, telecommunications, and infrastructure development. The qualification equips learners with the competencies required to address engineering challenges and contribute to technological innovation, infrastructure development, and sustainable energy solutions within South Africa's evolving economy.

The qualification provides an academic and professional pathway within the engineering technology field and prepares learners for practice-oriented roles in electrical engineering environments. On completion of the qualification, learners will have developed an understanding of electrical engineering principles, mathematics, natural sciences, and engineering technologies required to analyse and solve broadly defined engineering problems. Qualifying learners will be able to apply engineering methods, modern tools, and analytical techniques to design and improve electrical systems and processes, conduct investigations and experiments, and communicate technical information effectively within multidisciplinary teams. The qualification also prepares qualifying learners to operate responsibly within professional, legal, environmental, and ethical frameworks while contributing to engineering projects that support industrial development, digital transformation, and energy sustainability.

A qualified learner will be able to:
  • Apply engineering principles to systematically diagnose and solve broadly defined engineering problems.
  • Apply knowledge of mathematics, natural sciences, and engineering sciences to applied engineering procedures, processes, systems, and/or methodologies to solve broadly defined engineering problems.
  • Perform procedural design of components, systems, works, products, or processes to meet requirements, normally within applicable standards, codes of practice, and legislation.
  • Conduct investigations of broadly defined problems by identifying and searching for relevant codes and catalogues, conducting standard tests, experiments, and measurements.

    Rationale:
    The qualification has been developed to address the growing need for engineering technologists who can support the design, implementation, and maintenance of electrical systems across key sectors of the South African economy. Rapid technological advancement, infrastructure development, and the transition toward sustainable energy systems have increased the demand for qualifying learners with applied engineering competencies who are able to solve broadly defined engineering problems. This qualification provides a nationally recognised standard for the preparation of engineering technologists and supports the development of technical skills required in areas such as power systems, automation, communication systems, and industrial electronics. The qualification also contributes to addressing the national shortage of technically skilled professionals required to support South Africa's economic growth, industrial modernisation, and technological innovation.

    The qualification responds to sectoral demands identified by industry, government, and professional bodies for qualifying learners with strong practical and analytical capabilities in electrical engineering technology. Sectors such as energy generation and distribution, manufacturing, mining, telecommunications, construction, and transport rely on competent technologists to ensure the safe and efficient operation of electrical infrastructure and technological systems. The development of this qualification supports national priorities related to infrastructure expansion, energy security, digital transformation, and the transition to renewable energy systems. By producing qualifying learners with relevant engineering competencies, the qualification contributes to improving industrial productivity, technological innovation, and infrastructure reliability. The qualification therefore benefits the electrical engineering sector, society, and the broader economy by strengthening the technical workforce required to support sustainable development and technological advancement.

    Typical learners for this qualification include individuals who have completed a National Senior Certificate or National Certificate (Vocational) with appropriate mathematics and science preparation, as well as learners articulating from higher certificates or diplomas in electrical engineering or related fields. The qualification may also attract learners who wish to pursue careers in engineering technology and applied electrical engineering fields. Upon completion of the qualification, qualifying learners may enter a range of occupational areas including engineering technologist roles in utilities, manufacturing industries, mining operations, construction projects, telecommunications companies, and consulting engineering firms. Qualifying learners may also work in areas such as electrical system design, maintenance and operations, automation and control systems, renewable energy technologies, project management, and technical consultancy. The qualification prepares learners for professional practice in environments where the application of engineering technology is required to support industrial and infrastructure systems.

    The development and review of the qualification were undertaken in consultation with relevant stakeholders within the electrical engineering sector to ensure alignment with professional and industry requirements. Consultation with the Engineering Council of South Africa (ECSA) was conducted to ensure that the qualification aligns with the competencies and graduate attributes expected of engineering technologists and supports progression towards professional registration. Engagement with industry partners, engineering practitioners, and academic specialists informed the design and structure of the qualification to ensure that the curriculum reflects current technological developments and industry practices. These consultations ensure that the qualification prepares qualifying learners who meet the expectations of the engineering profession and can contribute effectively to engineering projects and technological development.

    The qualification forms part of the broader engineering education pathway within the Higher Education Qualifications Sub-Framework. The qualification enables learners to progress vertically to postgraduate qualifications such as the Bachelor of Engineering Technology Honours in Electrical Engineering or a Postgraduate Diploma in Electrical Engineering at NQF Level 8, which may further lead to master's and doctoral studies in engineering. Horizontally, qualifying learners may articulate into related engineering technology or engineering management qualifications depending on institutional requirements. Diagonally, qualifying learners may articulate across sub-frameworks. The qualification also supports career progression within the engineering profession by providing the academic foundation required for registration as a Professional Engineering Technologist with the Engineering Council of South Africa. Through these learning and career pathways, the qualification contributes to the development of skilled engineering professionals capable of advancing within technical and managerial roles in the engineering sector. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Recognition of Prior Learning (RPL):
    The institution has an approved Recognition of Prior Learning (RPL) policy which is applicable with regard to equivalent qualifications for admission into the Bachelor of Engineering Technology in Civil Engineering qualification. RPL will be applied to accommodate applicants who qualify. Thus, RPL provides alternative access and admission into this qualification, as well as advancement within the qualification. RPL may be applied for access, credits from modules and credits for or towards the qualification.

    RPL for access:
    Learners who do not meet the minimum entry requirements or the required qualification that is at the same NQF Level as the qualification required for admission into this qualification may be considered for admission through RPL. To be considered for admission in this qualification based on RPL, applicants should provide evidence in the form of a portfolio that demonstrates that they have acquired the relevant knowledge, skills, and competencies through formal, non-formal, and/or informal learning to cope with the qualification expectations should they be admitted into the qualification.

    RPL for advanced standing:
    An applicant who has already achieved some of the competencies expected for admission to, or progression within the Qualification may be allowed admission despite lacking the conventional qualification pathway. In such an instance, the applicant's prior learning, knowledge, skills, and professional experience will be assessed to determine whether they are equivalent to the learning outcomes normally required for admission into this qualification. This learning may have been acquired through formal studies, workplace experience, professional development, community engagement, short courses, research, or other forms of non-formal and informal learning.

    RPL for module exemption:
    Learners may apply for RPL to be exempted from modules that form part of the qualification. For a learner to be exempted from a module, the learner needs to provide sufficient evidence in the form of a portfolio which demonstrates that competency was achieved for the learning outcomes that are equivalent to the learning outcomes of the module.

    RPL for credit:
    Learners may also apply for RPL for credits for or towards the qualification, in which case they need to provide evidence in the form of a portfolio that demonstrates prior learning through formal, non-formal, and/or informal learning to obtain credits towards the qualification. Credit shall be appropriate to the context in which it is awarded and accepted.

    Entry Requirements:
  • National Senior Certificate (NSC), NQF Level 4, granting access to Bachelor's degree studies.
    Or
  • Senior Certificate, NQF Level 4, with endorsement granting access to Bachelor's degree studies.
    Or
  • National Certificate (Vocational), NQF Level 4, granting access to Bachelor's degree studies.
    Or
  • Higher Certificate in Electrical Engineering, NQF Level 5.
    Or
  • Diploma in Electrical Engineering, NQF Level 6. 

  • RECOGNISE PREVIOUS LEARNING? 
    Y 

    QUALIFICATION RULES 
    The qualification consists of compulsory and elective modules at National Qualifications Framework Level 5, 6, and 7, totalling 420 credits.

    Compulsory Modules, NQF Level 5, 140 Credits:
  • Engineering Mathematics I, 14 Credits.
  • Engineering Physics I, 14 Credits.
  • Digital Electronics I, 14 Credits.
  • Engineering Programming I, 14 Credits.
  • Electrical Technology II, 14 Credits.
  • Academic Literacy and Communication Studies, 14 Credits.
  • Basic Digital Literacy, 14 Credits.
  • Engineering Mathematics II, 14 Credits.
  • Digital Technology II, 14 Credits.
  • Electronics II, 14 Credits.

    Compulsory Modules, NQF Level 6, 140 Credits:
  • Engineering Mathematics III, 14 Credits.
  • Electrical Technology III, 14 Credits.
  • Electronics III, 14 Credits.
  • Electrical Machines Technology II, 14 Credits.
  • Power Systems II, 14 Credits.
  • Control Systems II, 14 Credits.
  • Communication Technology II, 14 Credits.
  • Engineering Programming II, 14 Credits.
  • Mathematical Applications III, 14 Credits.
  • Technology Management III, 14 Credits.

    Compulsory Modules, NQF Level 7, 98 Credits:
  • Power Electronics III, 14 Credits.
  • Process Control III, 14 Credits.
  • Energy Management III, 14 Credits.
  • Energy Technologies III, 14 Credits.
  • Project III (Capstone Design Project), 42 Credits.

    Elective Modules, NQF Level 7, 42 Credits: (Select one (1) specialisation stream)
    Power Systems Stream, 42 Credits:
  • Electrical Protection III, 14 Credits.
  • Electrical Machines Technology III, 14 Credits.
  • Power Systems III, 14 Credits.
    Or
    Electronics and Communication Stream, 42 Credits:
  • Networks II, 14 Credits.
  • Communications Technology III, 14 Credits.
  • Electronic Communication Systems III, 14 Credits.
    Or
    Computer and Automation Stream, 42 Credits:
  • Networks II, 14 Credits.
  • Engineering Programming III, 14 Credits.
  • Networks III, 14 Credits. 

  • EXIT LEVEL OUTCOMES 
    1. Apply engineering principles to systematically diagnose and solve broadly defined engineering problems.
    2. Apply knowledge of mathematics, natural sciences, and engineering sciences to applied engineering procedures, processes, systems, and/or methodologies to solve broadly defined engineering problems.
    3. Perform procedural design of components, systems, works, products, or processes to meet requirements, normally within applicable standards, codes of practice, and legislation.
    4. Conduct investigations of broadly defined problems by identifying and searching for relevant codes and catalogues, conducting standard tests, experiments, and measurements.
    5. Use appropriate techniques, resources, and modern engineering tools including information technology to solve broadly defined engineering problems, with an awareness of the limitations, restrictions, premises, assumptions, and constraints.
    6. Communicate effectively, both orally and in writing within an engineering context.
    7. Demonstrate knowledge and understanding of the impact of engineering activity on society, the economy, industrial and physical environment, and address issues by defined procedures.
    8. Demonstrate knowledge and understanding of engineering management principles and apply these in the work environment to manage projects, either as a team member or leader in a technical team.
    9. Engage in independent and life-long learning through broadly developed learning skills.
    10. Understand and commit to professional ethics, responsibilities, and norms of engineering technical practice. 

    ASSOCIATED ASSESSMENT CRITERIA 
    Associated Assessment Criteria for Exit Level Outcome 1:
  • Identify, formulate, and analyse problems using appropriate engineering principles and techniques.
  • Generate, model, and evaluate alternative solutions against technical, safety, economic, and environmental constraints.
  • Justify selected solutions through logical reasoning, simulation, and application of standards and codes of practice.

    Associated Assessment Criteria for Exit Level Outcome 2:
  • Apply mathematical and scientific methods to analyse and interpret electrical phenomena.
  • Develop and validate engineering calculations and models using established theories and assumptions.
  • Integrate quantitative and qualitative data to support problem-solving, design, and optimisation decisions.

    Associated Assessment Criteria for Exit Level Outcome 3:
  • Identify and document design objectives, constraints, and specifications according to relevant codes and legislation.
  • Produce, test, and refine design alternatives through analytical or simulation techniques.
  • Justify the preferred design based on technical, environmental, and economic evaluation.

    Associated Assessment Criteria for Exit Level Outcome 4:
  • Define the scope and purpose of investigations with clear hypotheses or objectives.
  • Source information from reliable literature, databases, and empirical observation.
  • Analyse and interpret data to produce valid, evidence-based conclusions presented in technical reports.

    Associated Assessment Criteria for Exit Level Outcome 5:
  • Select and apply relevant engineering tools, instruments, and software correctly for given tasks.
  • Recognise and manage tool capabilities and limitations to ensure accuracy and safety.
  • Verify and present results clearly using appropriate computational or graphical methods.

    Associated Assessment Criteria for Exit Level Outcome 6:
  • Produce technical reports, drawings, and documentation according to professional conventions and standards.
  • Communicate information logically, accurately, and confidently through oral presentations.
  • Use visual aids and digital media effectively to enhance understanding among diverse audiences.

    Associated Assessment Criteria for Exit Level Outcome 7:
  • Identify and analyse the social, economic, and environmental implications of engineering projects.
  • Evaluate engineering activities for compliance with health, safety, and environmental legislation.
  • Promote sustainable development and responsible professional practice through appropriate recommendations.

    Associated Assessment Criteria for Exit Level Outcome 8:
  • Apply management functions, including planning, organising, leading, and controlling, to engineering activities.
  • Coordinate individual and team contributions to achieve project objectives within resource and time constraints.
  • Exercise leadership, negotiation, and decision-making ethically and effectively.

    Associated Assessment Criteria for Exit Level Outcome 9:
  • Identify and pursue learning goals through self-directed study or professional activities.
  • Evaluate and integrate emerging technologies and innovations into professional practice.
  • Demonstrate continuous professional development through reflection, feedback, and application.

    Associated Assessment Criteria for Exit Level Outcome 10:
  • Recognise and address ethical dilemmas in accordance with professional codes and legal frameworks.
  • Demonstrate integrity, accountability, and respect for societal well-being through decisions and actions.
  • Accept responsibility for the environmental and social impact of engineering activities.

    Integrated assessment:
    Assessment in the qualification is designed to determine the learner's applied competence, integrating foundational knowledge, practical skills, and reflexive understanding. The assessment strategy aligns with institutional policy and the Engineering Council of South Africa (ECSA) outcome-based approach.

    Integrated assessment strategies are designed to evaluate a learner's ability to combine technical knowledge with practical skills and professional attributes to solve broadly defined engineering problems. Assessment instruments are mapped directly to the ELOs/ECSA GAs to confirm competence in problem solving, design, investigation, communication, ethics, and management. Moderation of assessments is conducted both internally and externally in accordance with the Institutional Assessment Policy and the relevant ECSA qualification Standard to ensure validity, reliability, and fairness. External and professionally registered moderators are appointed for the moderation of all exit-level modules or modules in which ECSA GAs are assessed. Typically, an integrated assessment strategy is inclusive of both formative and summative assessment methods in the form of class tests, main tests, practicals, assignments, and/or design projects. A final summative assessment is conducted at the end of each semester by writing a traditional examination. In the assessment strategy, evidence of professional competencies must be demonstrated through a variety of assessment methods, which include case studies, problem-solving assignments and strategies, portfolio of learning materials, projects and presentations, written and oral examinations, authentic practical exercises, and demonstrations. Some strategies will be more suited to assess foundational competence, while others are more suited to assess practical and reflexive competence, ensuring applied competence. The ratio of formative to summative assessment is 50:50.

    Formative assessment:
    Different forms of formative assessments, i.e., project reports, case studies, and assignments, apply to different modules throughout the semester. In each module, except for the Continuous Assessment (CA) modules, assessment of the gained knowledge is done by considering the following assessment criteria:
  • Course Mark (CM) 1: Test 1: 25%
  • CM2: Tests, assignments, and/or projects: 40%.
  • CM3: Practicals, laboratory work, associated reports and/or projects: 35% (Sub-minimum = 50%).

    Based on the above-listed formative assessment criteria, an overall minimum CM of 40% (CM1 + CM2 + CM3) is required for admission to the summative assessment (written examination) at the end of each semester.

    Summative assessment:
    In each module, except for the CA modules, the written Main Assessment has a 50% weighting; hence, the 50% formative and 50% summative assessments constitute the Final Mark (FM). To qualify for the Re-Assessment, a learner must obtain a FM between 45% and 49%. A learner has successfully completed a module if he/she has achieved a FM = 50%.

    Continuous assessment:
    In this qualification, continuous assessment only applies to the following modules:
  • Academic Literacy and Communication Studies, 14 Credits.
  • Basic Digital Literacy, 14 Credits.
  • Engineering Programming I, 14 Credits.
  • Engineering Programming II, 14 Credits.
  • Network I, 14 Credits.
  • Network II, 14 Credits.
  • Network III, 14 Credits.
  • Project III, 28 Credits.

    In the final-year Project module where the ECSA GAs, representative of ELOs 1 - 10, are assessed, a sub-minimum of 50% also applies and the consequence of unsatisfactory performance in any GA (after 2nd submission opportunity), is failure of the module, and the module needs to be repeated. In general, the following basic types of CA assessments are considered:
  • Formal individual assessment: These assessments are typically tests, based on individual assessments of learners. Minimum of two tests are required per semester. The combined weight of these tests equals a minimum of 50% or more of the FM composition. The multiple tests written need to cover the whole syllabus, and all tests need to be completed before the start of the (summative) Main Assessment period.
  • Formal group assessment: Assignments/projects may be given in a group or individual format. According to the ECSA requirements, assessments done on a group basis, may not contribute more than the individual assessments to the FM. Assignments/projects are typically given to learners to cover sections of the syllabus which cannot be covered within a 2-hour assessment session in class, or work content which requires extensive research and design aspects to be incorporated. Similarly, these assessments should also be completed before the start of the (summative) Main Assessment period. 

  • INTERNATIONAL COMPARABILITY 
    International comparability of engineering education qualifications is ensured through the Washington, Sydney and Dublin Accords, all being members of the International Engineering Alliance (IEA). The Sydney accord specifically is an international agreement between bodies responsible for accrediting engineering technology academic qualifications. The ELOs and level descriptors defined in this qualification are aligned with the International Engineering Alliance's Graduate Attributes and Professional Competencies. The following 10 countries are signatories of the Dublin Accord under EIA.

    Subsequently, learner mobility and recognition of prior learning/studies within these Qualifications accredited under the EIA (Dublin) Accord, will be possible, while adhering to all the required good practices at an international level. Hence, given that this envisaged Qualification is endorsed by ECSA and meeting all the requirements of the ECSA Qualification Standard (E-02-PN), it automatically entails that the Qualification is equivalent to any other international Qualification endorsed and accepted by the EIA. Thus, essentially no detailed comparisons are required to demonstrate international comparability.

    Furthermore, given that the same Qualification Standard applies to all the international academic Qualification signatories of the Dublin Accord under the EIA, the admission requirements, knowledge areas, ELOs/GAs, credits, assessments, duration, and/or articulation pathways will be similar; hence, ensuring the above-mentioned learner mobility and/or possible module recognitions.

    The following 10 countries are signatories of the Dublin Accord under EIA:
  • Australia, Engineers Australia (EA) (2001)
  • Canada, Canadian Council of Technicians and Technologists (CCTT)
  • Chinese Taipei, Institute of Engineering Education Taiwan (IEET)
  • Hong Kong China, Hong Kong Institution of Engineers (HKIE) Ireland Engineers Ireland (EI)
  • Korea, Accreditation Board for Engineering Education of Korea (ABEEK)
  • New Zealand, Institution of Professional Engineers New Zealand (IPENZ)
  • South Africa, Engineering Council South Africa (ECSA)
  • United Kingdom, Engineering Council United Kingdom (ECUK)
  • United States, Accreditation Board for Engineering and Technology (ABET) 

  • ARTICULATION OPTIONS 
    This qualification provides the following articulation options:
    Horizontal articulation:
  • Bachelor of Engineering Technology in Electronic Engineering, NQF Level 7.
  • Bachelor of Engineering Technology in Computer Engineering, NQF Level 7.
  • Bachelor of Engineering Technology in Industrial Engineering, NQF Level 7.
  • There are currently no registered horizontal articulation possibilities between Sub-Frameworks for this qualification.

    Vertical articulation:
  • Bachelor of Engineering Technology Honours in Electrical Engineering, NQF Level 8.
  • Postgraduate Diploma in Electrical Engineering, NQF Level 8.

    Diagonal articulation:
  • Advanced Occupational Certificate: Electrical Engineering Draftsperson, NQF Level 6.
  • Higher Occupational Certificate: Electrical Equipment Maintenance Specialist, NQF Level 5. 

  • MODERATION OPTIONS 
    N/A. 

    CRITERIA FOR THE REGISTRATION OF ASSESSORS 
    N/A. 

    NOTES 
    N/A. 

    LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION: 
     
    NONE 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Central University of Technology, Free State 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.