SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Adjust and maintain production machinery 
SAQA US ID UNIT STANDARD TITLE
9883  Adjust and maintain production machinery 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  30 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2005-07-19  2008-07-19  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2009-07-19   2012-07-19  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Starting up, monitoring, adjusting and shutting down a production line. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as part of a progression. It is one of a series of unit standards for activities at and above this level. The credits assigned to it are based on the assumption that I am learning what is needed for this unit standard as part of my learning for a range of related unit standards at this level or below it.

If I have experience in these related activities but do not have credits for them, I can obtain credits by being assessed through a process that recognises prior learning.

If I do not have such experience of related activities, then my learning time will be increased. I can choose to be assessed and obtain credits against those other unit standards as I make progress towards the outcomes of this unit standard. 

UNIT STANDARD RANGE 
"Adjust and maintain production machinery" implies the active involvement of the learner in bringing the production line back into specification by responding to equipment indicators when deviations occur. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Prepare for work activity. 
OUTCOME NOTES 
  • Check raw materials against production schedule requirements
  • Prepare materials for use
  • Check required tools, equipment and instruments available and in working order
  • Check calibration of instruments and other data collection equipment
  • Transport and assist with the installation of tooling 
  • OUTCOME RANGE 
    Assisting with tooling installation includes acting on instructions, connecting services and tightening bolts
    Tools include hand tools, power tools and measuring equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Process control data indicates manufacturing process is in compliance with standards and specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 2 
    2. Manufacturing process cycle time meets customer and company requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 3 
    3. Production output meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 4 
    4. Machinery runs effectively. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 5 
    5. Tooling installed and maintained. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 6 
    6. Quality inspection and test results are available and communicated to appropriate parties. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 7 
    7. Reports and records reflect events and conditions. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 8 
    8. The person relieving me knows what the production status is. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    SPECIFIC OUTCOME 2 
    Monitor and adjust machinery. 
    OUTCOME NOTES 
  • Start up and shutdown machinery
  • Respond to equipment indicators by making adjustments
  • Use appropriate tools and instruments to make adjustments
  • Check process control data to ensure process is back in specification once adjustments have been made
  • Maintain the condition of tooling 
  • OUTCOME RANGE 
  • Tools and instruments include hand and power tools and measuring equipment
  • Adjustments include adjustments to feed, speed and other controls
  • Maintaining tooling condition includes protecting tooling and forming surfaces from contamination and damage, cleaning and clearing cooling channels, applying corrosion inhibitors and cleaning agents, removing particles and dust from tooling surfaces and moving components, lubricating and applying release agents. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Process control data indicates manufacturing process is in compliance with standards and specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 2 
    2. Manufacturing process cycle time meets customer and company requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 3 
    3. Production output meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 4 
    4. Machinery runs effectively. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 5 
    5. Tooling installed and maintained. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 6 
    6. Quality inspection and test results are available and communicated to appropriate parties. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 7 
    7. Reports and records reflect events and conditions. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 8 
    8. The person relieving me knows what the production status is. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    SPECIFIC OUTCOME 3 
    Perform finishing activities on product produced. 
    OUTCOME NOTES 
    Post-treat product and/or components 
    OUTCOME RANGE 
    Finishing activities include packing and moving of products to other production lines. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Process control data indicates manufacturing process is in compliance with standards and specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 2 
    2. Manufacturing process cycle time meets customer and company requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 3 
    3. Production output meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 4 
    4. Machinery runs effectively. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 5 
    5. Tooling installed and maintained. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 6 
    6. Quality inspection and test results are available and communicated to appropriate parties. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 7 
    7. Reports and records reflect events and conditions. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 8 
    8. The person relieving me knows what the production status is. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    SPECIFIC OUTCOME 4 
    Perform quality tests and inspections on materials, components and product. 
    OUTCOME NOTES 
  • Report quality deviations
  • Communicate and document test and inspection results 
  • OUTCOME RANGE 
    Measuring and testing equipment includes rulers, verniers, go/no/go gauges, master samples, micrometers
    Tests include functionality tests 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Process control data indicates manufacturing process is in compliance with standards and specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 2 
    2. Manufacturing process cycle time meets customer and company requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 3 
    3. Production output meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 4 
    4. Machinery runs effectively. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 5 
    5. Tooling installed and maintained. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 6 
    6. Quality inspection and test results are available and communicated to appropriate parties. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 7 
    7. Reports and records reflect events and conditions. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 8 
    8. The person relieving me knows what the production status is. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    SPECIFIC OUTCOME 5 
    Recognise and report changes and/or malfunctions while operating. 
    OUTCOME NOTES 
    Report problems of quality, operation, output, safety 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Process control data indicates manufacturing process is in compliance with standards and specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 2 
    2. Manufacturing process cycle time meets customer and company requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 3 
    3. Production output meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 4 
    4. Machinery runs effectively. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 5 
    5. Tooling installed and maintained. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 6 
    6. Quality inspection and test results are available and communicated to appropriate parties. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 7 
    7. Reports and records reflect events and conditions. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 8 
    8. The person relieving me knows what the production status is. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    SPECIFIC OUTCOME 6 
    Work safely with due care for self, fellow workers, equipment, materials and the environment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Process control data indicates manufacturing process is in compliance with standards and specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 2 
    2. Manufacturing process cycle time meets customer and company requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 3 
    3. Production output meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 4 
    4. Machinery runs effectively. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 5 
    5. Tooling installed and maintained. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 6 
    6. Quality inspection and test results are available and communicated to appropriate parties. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 7 
    7. Reports and records reflect events and conditions. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 8 
    8. The person relieving me knows what the production status is. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    SPECIFIC OUTCOME 7 
    Document all occurrences on shift. 
    OUTCOME NOTES 
  • Determine output figures and material usage
  • Report any incidents/stoppages/malfunctions 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Process control data indicates manufacturing process is in compliance with standards and specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 2 
    2. Manufacturing process cycle time meets customer and company requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 3 
    3. Production output meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 4 
    4. Machinery runs effectively. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 5 
    5. Tooling installed and maintained. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 6 
    6. Quality inspection and test results are available and communicated to appropriate parties. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 7 
    7. Reports and records reflect events and conditions. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 8 
    8. The person relieving me knows what the production status is. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    SPECIFIC OUTCOME 8 
    Discuss and explain incidents and problems related to the process, the materials and the products. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Process control data indicates manufacturing process is in compliance with standards and specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 2 
    2. Manufacturing process cycle time meets customer and company requirements. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 3 
    3. Production output meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 4 
    4. Machinery runs effectively. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 5 
    5. Tooling installed and maintained. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 6 
    6. Quality inspection and test results are available and communicated to appropriate parties. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 7 
    7. Reports and records reflect events and conditions. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 

    ASSESSMENT CRITERION 8 
    8. The person relieving me knows what the production status is. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Sufficient materials available
    2. Adjustments to machinery are made in a timely manner
    3. Reject/waste is minimised or adequate explanation given
    4. All monitoring activities and adjustments are accurately documented
    5. Tooling installation is not delayed by poor planning and interruptions to production are minimised
    6. Appropriate quality tests and inspections are performed and repeated as necessary to determine the nature of the problem or obtain required results
    7. Quality deviations are reported to correct parties in a timely manner and are described accurately
    8. Finishing activities are carried out promptly to avoid bottle necks in the process
    9. Monitoring activities and adjustments carried out are accurately documented
    10. Work is carried out in a safe manner
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    1. Implications of failing to carry out required adjustments during process.
    2. Implications of failing to replace worn tooling on product produced.
    3. Implications for accuracy of the misuse of instruments.
    4. Consequences of materials spillage.
    5. Respond to 'what if' and 'why questions about the relationships between equipment, materials, processes and final product. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    My assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assurer who has jurisdiction over this field of learning. My assessor will (at the very least) be accredited and have a technical qualification in this learning area.

    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.

    I will be assessed in the workplace but I can submit documents, projects, test results and assignments that were not produced in the workplace.

    I can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names & functions of:
  • Parts and components of processing and testing equipment
  • Instruments and measuring tools
  • Tooling parts and components
  • Equipment for lifting and transporting tooling
  • Production-related documentation
  • Cleaning and purging materials

    Attributes, descriptions, characteristics & properties:
  • Materials, equipment, controls

    Sensory cues:
  • Ad-hoc tests for conditions (sight, colour, sound)

    Purpose of:
  • Purging, cleaning, cooling
  • Tooling parts and components

    Processes, events, causes and effects, implications:
  • Nature and sequence of operations
  • Collecting measuring conditions and outcomes
  • Operational parameters
  • Impact on production costs of delays or poorly executed tooling changes

    Procedures and techniques:
  • Start up
  • Shut down
  • Purging
  • Adjusting
  • Lifting and transporting tooling
  • Installing tooling
  • Cleaning and maintaining tooling
  • Reading and understanding basic engineering drawings

    Regulations, legislation, agreements, policies, standards
  • Quality standards and specifications
  • Applicable regulations related to transporting and lifting tooling
  • Applicable safety, health and environmental protection legislation and standard

    Theory: rules, principles, laws
  • Work, temperature, phase changes
  • Pressure, speed
  • Concepts related to the activity, e.g. friction, abrasion, torque, tensile forces, moments
  • Hardness of materials (steels, hardening, etc.)
  • Ferrous and non-ferrous metals Oxidation, corrosion, contamination
  • Heating and cooling (heat transfer, mediums), expansion and contraction
  • Viscosity

    Relationships, systems:
  • Relationships between equipment, materials, processes and final product
  • Relationship between tooling shape and design and process, materials and end-product
  • Relationship between tooling cost and product cost 


  • Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Recognise and respond to deviations, incorrect setting, problems with process
  • Identify and respond to problems which will impact on safety, quality and cost 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others:
  • Interact with others to achieve production output 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • Plan and manage equipment operations
  • Apply procedures and practices which will reduce the possibility of accidents, reduce damage and time 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • Translate conditions or instructions into specific actions or criteria 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Report incidents and conditions related to the process or operations
  • Document all occurrences and results in required format 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Operate machinery and tools effectively
  • Treat materials correctly 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Relate the machinery conditions to the condition and properties of the final product 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  21005   National Certificate: Automotive Component Manufacturing and Assembly  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2008-11-01  Was MERSETA until Last Date for Achievement 
    Core  58719   National Certificate: Metals Processing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Core  21012   National Certificate: Power and Telecommunication Cable Manufacturing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Elective  24196   National Certificate: Construction Material Manufacturing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.