SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Manufacture a pendant using jewellery piercing techniques 
SAQA US ID UNIT STANDARD TITLE
261297  Manufacture a pendant using jewellery piercing techniques 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 1  NQF Level 01 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
15266  Fabricate non-ferrous and precious metal jewellery using hand-held tools and equipment  Level 2  NQF Level 02   

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to people who are required to manufacture a pendant using jewellery-piercing techniques.

People credited with this unit standard are able to:
  • Measure, mark and score the sheet metal.
  • Drill holes.
  • Pierce and file the design.
  • Polish the pendant. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are already competent in:
  • Communication and Mathematical Literacy at ABET Level 3. 

  • UNIT STANDARD RANGE 
    The following range applies to this unit standard:
  • Sheet metal excludes ferrous metal. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Measure, mark and score the sheet metal. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The application of tools, materials and equipment is described in accordance with their uses. 

    ASSESSMENT CRITERION 2 
    Tools, material and equipment are selected and ensured to be ready for use in accordance with jewellery manufacturing requirements. 

    ASSESSMENT CRITERION 3 
    The sheet metal is measured, marked and scored according to jewellery manufacturing requirements. 

    ASSESSMENT CRITERION 4 
    Tools and equipment are used according to their design and purpose. 

    ASSESSMENT CRITERION 5 
    House keeping and safety practices are adhered to and demonstrated in terms of health and safety standards. 

    ASSESSMENT CRITERION 6 
    The consequences of not adhering to correct preparation, housekeeping and safety practices are described in terms of the potential impact on safety, productivity, quality and cost. 

    SPECIFIC OUTCOME 2 
    Drill holes. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The application of tools, materials and equipment is described in accordance with their uses. 

    ASSESSMENT CRITERION 2 
    Tools, material and equipment are selected and ensured to be ready for use in accordance with specified requirements. 

    ASSESSMENT CRITERION 3 
    Holes are drilled according to jewellery manufacturing requirements. 

    ASSESSMENT CRITERION 4 
    Tools are used according to their design and purpose. 

    ASSESSMENT CRITERION 5 
    House keeping and safety practices are adhered to and demonstrated in terms of health and safety standards. 

    ASSESSMENT CRITERION 6 
    The consequences of not adhering to correct preparation, housekeeping and safety practices are described in terms of the potential impact on safety, productivity, quality and costing. 

    SPECIFIC OUTCOME 3 
    Pierce and file the design. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The application of tools, materials and equipment is described in accordance with their uses. 

    ASSESSMENT CRITERION 2 
    Tools, materials and equipment are selected and ensured to be ready for use in accordance with specified requirements. 

    ASSESSMENT CRITERION 3 
    The tools are used according to their design and purpose. 

    ASSESSMENT CRITERION 4 
    The design is pierced and filed according to jewellery manufacturing requirements. 

    ASSESSMENT CRITERION 5 
    House keeping and safety practices are adhered to and demonstrated in terms of health and safety standards. 

    ASSESSMENT CRITERION 6 
    The consequences of not adhering to correct workmanship, house keeping and safety practices are described in terms of the potential impact on safety, productivity, quality and costing. 

    SPECIFIC OUTCOME 4 
    Polish the pendant. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The application of tools, materials and equipment is described in accordance with their uses. 

    ASSESSMENT CRITERION 2 
    Tools, materials and equipment are selected and ensured to be ready for use in accordance with specified requirements. 

    ASSESSMENT CRITERION 3 
    The pendant is polished according to jewellery manufacturing requirements. 

    ASSESSMENT CRITERION 4 
    The tools are used according to their design and purpose. 

    ASSESSMENT CRITERION 5 
    House keeping and safety practices are adhered to and demonstrated in terms of health and safety standards. 

    ASSESSMENT CRITERION 6 
    The consequences of not adhering to correct workmanship, house keeping and safety practices are described in terms of the potential impact on safety, productivity, quality and costing. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise.
  • Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge is addressed in an integrated way in the unit standard:

    Knowledge relating to manufacturing a pendant using jewellery piercing:
  • Knowledge of the malleability of the metal and wire.
  • Three-dimensional spatial perception and developed hand eye co-ordination.

    Processes and events:
  • Knowledge of various jewellery manufacturing processes.
  • Exposure to various jewellery manufacturing processes.
  • Distinguish poor jewellery manufacturing quality from acceptable quality.

    Causes and effects (Safety and Health):
  • Use of equipment.
  • Use of personal protective equipment.
  • Adherence to safety requirements.
  • Work related hazards and associated risks.

    Regulations, legislation, agreements, policies and standards:
  • Safety, health and environmental legislation and regulations.
  • Quality policies, standards and agreements. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking.

    Note:
  • The ability of the learner to select the correct and relevant tools, materials and equipment for the manufacture of a pendant using piercing techniques, and to plan the manufacturing process very carefully and logically. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as members of a team, group, organisation or community.

    Note:
  • The ability and willingness of the learner to accept and interpret the specified requirements correctly. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively.

    Note:
  • The ability of the learner to indicate which tools, equipment and procedures are required for the manufacturing process of the pendant. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.

    Note:
  • The ability of the learner to plant, the procedure, the preparation, the assembly and the specified finish gathered from the design specifications with the specified requirements. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations.

    Note:
  • The ability of the learner to interpret specified requirements by liaising and interacting with relevant role players in the production process, using appropriate and effective communication methods. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others.

    Note:
  • The ability to use the relevant technology applying the required occupational health and safety measures to conduct the required manufacturing task in an agreed time frame. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.

    Note:
  • The ability of the learner to identify the relevant factors that contribute to the success or failure of the manufactured jewellery piece: The quality of the metal, the preparation thereof, the correct interpretation of the design and what it hopes to achieve in the rest of the jewellery production process, and as a whole, within the rest of the jewellery industry. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 15266, "Fabricate non-ferrous and precious metal jewellery using hand-held tools and equipment", Level 2, 8 credits.

    Terminology:
  • Non-Ferrous metal refers to all non precious metals that do not contain iron.
  • Precious metal refers to silver, gold and platinum.
  • Pierce refers to removing metal with a jewellers saw frame.
  • Draw refers to elongating and compressing a metal rod by pulling it through a draw plate.
  • Drawplate refers to a steel plate with graded tapering holes used to draw wire.

    Specified Requirements:

    Specified requirements include legal and workplace specific requirements and are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health and Safety Act, 1996 (Act no 29/1996), and Minerals Act and Regulations, 1991 (Act no 50/1991)
  • Regulations.
  • Mandatory Codes of Practice.
  • SANS and other Standards.

    Site Specific:
  • Hazard Identification and Risk Assessment (HIRA).
  • Occupational Health and Safety Risk Management Programme.
  • Voluntary Codes of Practices.
  • Managerial Instructions.
  • Mine Standard Procedures.
  • List of Recorded OH and S Risks.

    Jewellery Industry Requirements:
  • Working Guides.
  • User manuals supplied by equipment manufacturer.
  • The Bargaining Council for the Jewellery and Precious Metals Industry Main Agreement.
  • The employer's work specifications, tariff agreements and policies and Procedures.
  • Regulations as per directives from the Gold and Diamond Branch of the Southern African Police.
  • ISO 9000/1, SANS and other accredited standards and quality assurance measures.
  • A glossary of terms regarding the terminology of the Jewellery Industry. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  65049   National Certificate: Jewellery Manufacturing  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.