SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Achieve excavation stability with support installation in high mining height areas in various geotechnical conditions 
SAQA US ID UNIT STANDARD TITLE
252615  Achieve excavation stability with support installation in high mining height areas in various geotechnical conditions 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
115640  Achieve excavation stability with support installation in high mining height areas in various geotechnical conditions  Level 2  NQF Level 02  Complete 

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to people who are responsible to achieve mining excavation stability with support in high mining heights in various geotechnical conditions. People credited with this unit standard are able to:
  • Demonstrate knowledge of support installation to achieve excavation stability.
  • Prepare for support installation.
  • Install support.
  • Conduct a post-installation procedure.

    The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and contribute to the upliftment and economic growth of the mining and minerals sector.

    This unit standard is intended to promote general skills, knowledge and an understanding of achieving mining excavation stability with support in installation in high mining height areas in various geological conditions in the mining and minerals sector in order to ensure knowledgeable and informed workers. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The credit calculation is based on the assumption that learners are already competent in terms of the following outcomes or areas of learning when starting to learn towards this unit standard:
  • Communication at NQF Level 1.
  • Understanding of support principles at NQF Level 1.
  • Understanding of the principles of monitoring and instrumentation at NQF Level 1.
  • Understanding of the generic support types, their behaviour and applications at NQF Level 1. 

  • UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of support installation to achieve excavation stability. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Procedures for entry and watering down procedures are explained in terms of operational requirements. 

    ASSESSMENT CRITERION 2 
    Adverse conditions are explained in the context of recognition and actions for correction. 
    ASSESSMENT CRITERION RANGE 
  • Heat.
  • Dust.
  • Airflow.
  • Ground conditions.
  • Harmful gases.
     

  • ASSESSMENT CRITERION 3 
    The density and installation of the specified support are explained in terms of legal and operational requirements. 

    ASSESSMENT CRITERION 4 
    The purpose of the support installation are explained in the context of ensuring a safe production environment. 

    ASSESSMENT CRITERION 5 
    Requirements pertaining to the cleaning and preparation of the footwall or floor are explained in the context of preparing for installation of support. 

    SPECIFIC OUTCOME 2 
    Prepare for support installation. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The required personal protective equipment is selected, examined and used in a way that is consistent with its purpose, design and specified requirements. 
    ASSESSMENT CRITERION RANGE 
  • Hand protection.
  • Safety boots.
  • Safety hat.
  • Safety chain.
  • Eye protection.
     

  • ASSESSMENT CRITERION 2 
    Personal Protective Equipment is used so that the safety of the operator, team and equipment is protected. 

    ASSESSMENT CRITERION 3 
    All tools, material and equipment required for support installation are selected, examined and ensured to be ready for use according to mine procedures. 

    ASSESSMENT CRITERION 4 
    Tools, material and equipment are transported in accordance with legal and operational requirements. 

    ASSESSMENT CRITERION 5 
    The work site is examined for substandard conditions and hazards that in accordance with the relevant procedures. 

    ASSESSMENT CRITERION 6 
    Substandard conditions and hazards are dealt with in accordance with mine legal and operational requirements. 

    ASSESSMENT CRITERION 7 
    The consequences of inadequate preparation to install support are described in terms of the potential effect on safety, health, equipment and production. 

    SPECIFIC OUTCOME 3 
    Install support. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The temporary support positions are marked off in accordance with operational requirements. 

    ASSESSMENT CRITERION 2 
    The installation procedure for temporary support is conducted according to legal and operational requirements. 

    ASSESSMENT CRITERION 3 
    The permanent support positions are marked off in accordance with legal and operational requirements. 

    ASSESSMENT CRITERION 4 
    The installation of the permanent support is conducted according to legal and operational specified requirements. 

    ASSESSMENT CRITERION 5 
    The consequences of inadequate support installation are described in terms of the potential effect on safety, health, equipment and production. 

    SPECIFIC OUTCOME 4 
    Conduct a post installation procedure. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Quality control inspections are performed according to mine specific requirements. 

    ASSESSMENT CRITERION 2 
    Quality control and identification of sub-standard conditions are explained in terms of potential hazards. 
    ASSESSMENT CRITERION RANGE 
  • Quality and monitoring of installation.
  • Spacing of support units.
  • Support failure.
  • Support height-width ratio.
  • Effectiveness or ineffectiveness.
  • Suitability of units installed.
  • Replacement of damaged units.
     

  • ASSESSMENT CRITERION 3 
    The remaining potentially unstable areas identified after the correct installation of support are immediately reported, recorded and monitored according to operational requirements. 
    ASSESSMENT CRITERION RANGE 
  • Excessive closure or closure rate.
  • Sudden closure.
  • Backbreak.
  • Open fractures or joints.
  • Excessive bed/layer separation.
  • Relative rock displacements.
  • Loosening.
  • Premature support unit failure.
     

  • ASSESSMENT CRITERION 4 
    Defective tools and equipment are dealt with according to legal and operational requirements. 

    ASSESSMENT CRITERION 5 
    Good housekeeping is practiced according to the relevant procedures. 

    ASSESSMENT CRITERION 6 
    The consequences of deviating from mine specific procedures are described in terms of the potential effect on safety, health, equipment and production. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against the qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the associated unit standards.
  • Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge is addressed in an integrated way in the unit standard:
  • Principles of support installation.
  • Prepare for support installation.
  • Installing support.
  • Conduct post installaiton procedure. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as members of a team, group, organisation or community.
  • Note: The learner demonstrates the understanding that in a mining production environment effective teamwork is of utmost importance in working safely and productively. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively.
  • Note: The learner demonstrates understanding that activities, tools and equipment have to be managed effectively in the often isolated mining working environment. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations.
  • Note: The learner demonstrates the ability to communicate effectively with co-workers in the mining working environment, in which team members are dependent upon each other. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others.
  • Note: The learner demonstrates and understanding of and ability to use advanced mining technology in terms of production, safety and communication. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.
  • Note: The learner demonstrates understanding that various systems contribute to the overall safety and productivity of an underground working environment, and that it is as important to contribute to the efficiency of those systems as to be supported by them, particularly by means of following relevant procedures diligently. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 115640, "Achieve excavation stability with support installation in high mining height areas in various geotechnical conditions", Level 2, 3 credits.

    Terminology:

    Specified Requirements:

    Specified requirements include legal and site-specific requirements and are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health & Safety Act and Regulations, 1996 (Act no 29/1996), and Minerals Act and Regulations, 1991 (Act no 50/1991).
  • Mandatory Codes of Practice.
  • SANS and other relevant Standards.
  • Chief Inspector of Mines' Directives.
  • Guidelines issued by the Chief Inspector of Mines.

    Site-Specific:
  • Hazard Identification and Risk Assessments (HIRA).
  • Occupational Health and Safety Risk Management Programme.
  • Managerial Instructions.
  • Mine Standard Procedures.
  • List of Recorded OH&S Risks.
  • Working Guides.
  • Equipment and Materials Specifications.

    Unit Standard Justification:

    Level: 2.

    Attribute; Level; Justification:
  • Skills; Level 2; Moderate in range.
  • Procedures; Level 1; Repetitive and familiar.
  • Context; Level 2; Routine and familiar.
  • Knowledge; Level 3; Some relevant theoretical.
  • Information processing; Level 2; Basic processing of readily available information.
  • Problem Solving; Level 2; Known solutions to familiar problems.
  • Orientation of activities; Level 1; Directed.
  • Application of responsibility; Level 2; Some responsibility for quantity and quality, and possible responsibility for guiding others.
  • Orientation of scope of responsibility; Level 3; Under general supervision quality checking.

    Average Level = 2.
    Actual Levels Assigned = 2.

    Credits:

    Total hours required by the learner to achieve the required outcome:

    Activity; Hours:
  • Classroom Teaching; 10 Hours.
  • On-The-Job Training; 20 Hours.
  • Mentoring required; 0 Hours.
  • Other (Specify); 0 Hours.

    Total: 30 Hours.

    Credits Achieved: 30/10 = 3.0.
    Credits Assigned = 3. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  59549   National Certificate: Strata Control Operations  Level 2  NQF Level 02  Reregistered  2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Adcorp Technical Training 
    2. ANGLOGOLD ASHANTI LTD (V/R) 
    3. KHUTALA COLLIERY 
    4. MESSINA PLATINUM MINES 
    5. Palabora Copper Pty Ltd 
    6. SIBANYE GOLD ACADEMY PROPRIETARY LIMITED 
    7. WESTERN PLATINUM MINE 
    8. XTRACT TRAINING SERVICES (PTY) LTD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.