SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Weld carbon steel pipe, using the shielded metal arc welding process in all positions 
SAQA US ID UNIT STANDARD TITLE
243062  Weld carbon steel pipe, using the shielded metal arc welding process in all positions 
ORIGINATOR
SGB Welding 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Engineering and Related Design 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  20 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
14709  Weld pipes using shielded metal arc welding process  Level 4  NQF Level 04  20   

PURPOSE OF THE UNIT STANDARD 
This unit standard is for learners within the fabrication and welding fields.

A person credited with this unit standard is capable of:
  • Describing the shielded metal arc welding process and related equipment.
  • Selecting and setting up of shielded metal arc welding equipment.
  • Conducting pre-operational checks.
  • Preparing pipes prior to welding.
  • Welding pipes.
  • Inspecting welded pipes for imperfections and defects in compliance with specifications.
  • Caring for and storing welding consumables and equipment.

    This unit standard will contribute to the full development of any learner by providing recognition, further mobility and transportability within the field. The knowledge, skills and understanding demonstrated in this unit standard are essential for social and economic transformation and upliftment within the fabrication and welding environment. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
  • National Certificate in Welding Application and Practice NQF Level 3, or when attempting this unit standard as a stand-alone.

    Competency should be demonstrated in:
  • "Weld carbon steel work pieces, using the shielded metal arc-welding process in all positions."
  • Emphasis should be laid prior to commencement of training, on the health risks associated with carbon steel welding. 

  • UNIT STANDARD RANGE 
    Material to be used:
  • Size of pipes to be welded should be: Nominal bore (NB) - 10mm (minimum).
  • Minimum wall thickness of pipe -1mm. Select from range of Carbon Steels (Material Group 1, 2, 3 or 11, according to CR/ISO TR 15608).

    Context:
  • All work undertaken must comply with current Occupational Health and Safety Act requirements.
  • All work must comply with worksite practices.
  • All work done under limited supervision.

    Level:
    Level (for level 4).

    A learning programme leading to the award of this unit standard should develop learners who demonstrate:
  • A foundational knowledge base as indicated in the embedded knowledge component.
  • An understanding of the discipline/field's fundamental terms, rules, concepts and principles.
  • Familiarity with some of the essential procedures, operations and techniques of this field.
  • An ability to use a range of procedures to solve routine problems.
  • Basic information gathering, analysis and presentation skills.
  • An ability to communicate and present information clearly and reliability following prescribed formats and conventions. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Describe the shielded metal arc welding process and related equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The importance of correct assembly of the shielded metal arc welding equipment, and the consequences of incorrect assembly, is explained with reference to the manufacturer's requirements. 

    ASSESSMENT CRITERION 2 
    Components of the shielded metal arc welding equipment are identified and the explanation of function and purpose is correct in terms of the manufacturer's specifications. 
    ASSESSMENT CRITERION RANGE 
    Parts include:
  • Suitable welding power source, earth clamp, electrode holder, cables, safety clothing and equipment.
     

  • ASSESSMENT CRITERION 3 
    Parts and components correctly identified and the implications for incorrect identification explained. 

    ASSESSMENT CRITERION 4 
    Terms and definitions used are consistent with generally accepted welding terminology as recorded in national and international welding standards. 

    SPECIFIC OUTCOME 2 
    Select, assemble and conduct pre-operational checks of shielded metal arc welding equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Verification, identification and selection of shielded metal arc welding equipment as per job requirements. 

    ASSESSMENT CRITERION 2 
    Identification and rectification of possible welding hazards in accordance with standard work site practices. 

    ASSESSMENT CRITERION 3 
    Pre-operational checks are carried out in accordance with manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    A safe worksite is created to prevent damage to equipment and injury to people. 
    ASSESSMENT CRITERION RANGE 
    Resources to include:
  • Manufacturer's operational and specifications manual, worksite practices, safety and environmental.
     

  • SPECIFIC OUTCOME 3 
    Prepare pipes prior to welding. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Pipes prepared prior to welding as specified on drawing and worksite practices. 

    ASSESSMENT CRITERION 2 
    Dimensions and alignment checked as specified on drawing. 

    ASSESSMENT CRITERION 3 
    Pipes tack-welded into position as specified as per drawing. 

    ASSESSMENT CRITERION 4 
    Safety precautions adhered to. 

    ASSESSMENT CRITERION 5 
    Inspect pipes prior to welding. 
    ASSESSMENT CRITERION RANGE 
    Resources include:
  • Worksite practices, tools and equipment.
  • Safety legislation as per job requirements.
  • Inspection methods - Visual and non-destructive.

    Observations applicable prior to the tack-welding process:
  • Heat input, electrode size, filler material selection, joint preparation, welding technique, consumable usage and handling.

    Material to be used:
  • Size of pipes to be welded should be: Nominal bore (NB) - 10mm (minimum).
  • Minimum wall thickness of pipe -1mm.
  • Select from range of Carbon Steels (Material Group 1, 2, 3 or 11, according to CR/ISO TR 15608).
     

  • SPECIFIC OUTCOME 4 
    Weld pipes. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Welding parameters are established and conform to job requirements. 

    ASSESSMENT CRITERION 2 
    Welding consumables selected and used as per job requirements. 

    ASSESSMENT CRITERION 3 
    Potential causes of welding imperfections and defects are identified prior to welding and precautions taken as per worksite practices. 

    ASSESSMENT CRITERION 4 
    Pipes welded in position as per job requirements. 

    ASSESSMENT CRITERION 5 
    Safety precautions adhered to during welding process. 

    ASSESSMENT CRITERION 6 
    Pipes cleaned after welding as per worksite practices. 
    ASSESSMENT CRITERION RANGE 
    Material to be used:
  • Size of pipes to be welded should be: Nominal bore (NB) - 10mm (minimum).
  • Minimum wall thickness of pipe -1mm.
  • Select from range of Carbon Steels (Material Group 1, 2, 3 or 11, according to CR/ISO TR 15608).

    Specification requirements:
  • Heat input, electrode manipulation, electrode size, joint preparation, welding technique, consumable handling.

    Resources include:
  • Welding equipment, tools, protective clothing and equipment, welding procedure specification, materials as specified on drawings and weld filler material.

    Welding positions:

    > Groove-welding positions only:
    > Flat rotational.
    > Flat/Horizontal.
    > Vertical (fixed position).
    > Inclined at 45°.
     

  • SPECIFIC OUTCOME 5 
    Inspect welded pipe for defects. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    All welding spatters removed as specified in cleaning procedure. 

    ASSESSMENT CRITERION 2 
    Welded pipe conforms to job specifications. 

    ASSESSMENT CRITERION 3 
    Inspection methods and procedures selected are conducive to specifications. 

    ASSESSMENT CRITERION 4 
    Documentation completed as reflected in worksite practices. 
    ASSESSMENT CRITERION RANGE 
    Procedures include:
  • Worksite practices, inspection methods, and cleaning procedures.
  • Welded joints acceptance criteria to be in accordance with a national and/or international welding standard.
     

  • SPECIFIC OUTCOME 6 
    Care for and store welding consumables and equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Tools and equipment cared for as per worksite practices. 

    ASSESSMENT CRITERION 2 
    Tools and equipment stored as per worksite practices. 

    ASSESSMENT CRITERION 3 
    Welding consumables stored as per worksite practices. 
    ASSESSMENT CRITERION RANGE 
  • Care and storage practices should conform to manufacturer's requirements and be conducive to preventative maintenance schedules.
  • Defective equipment to be dealt with in accordance to worksite practices.
  • Consumables and equipment are to be stored in a usable condition for the next user.
     


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard must be accredited in terms of the criteria laid down by the relevant ETQA.
  • Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines in the relevant qualification and the agreed ETQA procedures. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names and functions of:
  • Related welding equipment.
  • Welding consumables, eg. classification of electrodes, cable-types, electrode-holders, etc. as stipulated in the welding procedure specification, where applicable.
  • Personal protective equipment.
  • Various groupings of carbon steels.

    Attributes, descriptions, characteristics and properties:
  • Know the grades of carbon steels; their characteristics and classification.
  • Common defects.
  • Safety hazards associated with the welding of carbon steel.
  • Health risks associated with carbon steel welding.
  • Common welding processes for carbon steels.
  • Characteristics of electricity.
  • Weld-ability of different types of steels.
  • Shrinkage, residual stress, distortion.

    Sensory cues:
  • Smell indicating overheating equipment.
  • Observing, listening during welding operations.

    Purpose of:
  • Shielded metal arc welding.
  • Safety checks.
  • Reporting incidents and conditions.
  • Checking completed weld.

    Processes, events, causes and effects, implications:
  • Causes of hazards and responses to them.
  • Causes of defects and responses to them.
  • Overview of fusion welding processes.
  • Implications of not preparing pipe before welding.
  • Shrinkage, residual stress, distortion.

    Procedures and techniques:
  • For eliminating, isolating or minimising welding hazards.
  • Procedures for preparing materials before welding.
  • Safety procedures.
  • Quality procedures.
  • Recording and reporting procedures.
  • Maintenance procedures.
  • Inspection and testing.
  • Storage procedures.
  • Baking procedures.

    Regulations, legislation, agreements, policies, standards:
  • Health and Safety.
  • Safe working in the fabrication shop.
  • National and international standards related to the inspection of completed work.
  • International standard for the grouping of metals.

    Theory: rules, principles, laws:
  • Applicable to properties of materials.
  • Weld-ability of carbon steels.

    Relationships, systems:
  • Relationship between grades, section thickness and mechanical properties of carbon steel and welding parameters.
  • Relationship of the mechanical properties of welded joints with cooling rate following welding. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    Unit standard linkages exist in the following Specific Outcomes:
  • Describing the shielded metal arc welding process.
  • Selecting and setting up of shielded metal arc welding equipment.
  • Conducting pre-operational checks.
  • Caring for and storing welding consumables and equipment.

    A competency judgement may be awarded where learners have already completed one of the following learning units:
  • "Weld carbon steel work pieces, using the shielded metal arc welding process in the downhand position."
  • "Weld carbon steel work pieces, using the shielded metal arc welding process in all positions." 


  • Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Recognise problems of equipment and process while welding and respond appropriately.
  • Defects are recognised and corrected.
  • Hazards are recognised and preventative action taken. 

  • UNIT STANDARD CCFO WORKING 
    Work together with others:
  • Contribute to workgroup efforts. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • Plan sequence of operations based on job instructions and set up equipment appropriately. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • Visually examine and conduct tests on completed weld to control quality. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Record outcome of work.
  • Report outcome of work to appropriate personnel. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Properties of metals.
  • Electrical and mechanical principles.
  • Principles of expansion and contraction. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Explain the relationship between the physical properties and the weld ability of the material. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 14709, "Weld pipes using shielded metal arc welding process", Level 4, 20 credits.

    Notes to Assessor

    Assessors should keep the following general principles in mind when designing and conducting assessments against this unit standard:
  • Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the person competent in terms of the title. Where assessments at title level are unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.
  • Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the candidate is able to perform in the real situation.
  • Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
  • The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.
  • The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the candidate can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.
  • All assessments should be conducted in line with the following well documented principles of assessment: appropriateness, fairness, manageability, integration into work or learning, validity, directness, authenticity, sufficiency, openness and consistency.

    This unit standard may be obtained through RPL. The learner should be thoroughly briefed on the mechanism to be used and support and guidance should be provided. Care should be taken that the mechanism used provides the learner with an opportunity to demonstrate competence and is not so onerous as to prevent learners from taking up the RPL option towards gaining a qualification. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  57887   Further Education and Training Certificate: Welding Application and Practice  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  58720   National Certificate: Engineering Fabrication  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.