SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Install vehicle drive train components 
SAQA US ID UNIT STANDARD TITLE
15099  Install vehicle drive train components 
ORIGINATOR
SGB Vehicle Maintenance 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  16 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2006-11-07  2009-11-07  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2010-11-07   2013-11-07  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
People in the field of manufacturing and engineering require the skills, values and knowledge reflected in this unit standard. The learning outcomes in this unit standard also contribute to the exit level outcomes required for various manufacturing and engineering qualifications. The learner is capable of installing vehicle drive train components to restore operational condition of vehicle. This will contribute to the exit level outcomes required for the National Certificate in maintaining vehicles and related qualifications. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as part of a progression. It is one of a series of unit standards for maintaining vehicles in the field of manufacturing and engineering. It is assumed that the learner has already learned the use of engineering hand tools, workshop equipment, power tools, and measuring equipment, select and use automobile lifting equipment to maintain a safe and productive working environment. 

UNIT STANDARD RANGE 
The ranges as indicated under the specific outcomes determine the scope and level of this unit standard.
All work is performed under supervision at regular intervals and according to workplace and workshop manual specifications and occupational safety, health and environmental legislation. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Plan and prepare work area and vehicle for component installation. 
OUTCOME RANGE 
  • Planning includes reading and interpreting the job card/work instructions and obtaining service data.
  • Preparing includes selecting appropriate tools and equipment and cleaning area(s) where component is to be installed.
  • Appropriate tools and equipment means industry approved tools and equipment as being most suited to complete the task to a professional and competent manner with due regard to safe working practices.
  • Vehicle include passenger, light delivery, commercial and earthmoving equipment machinery. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
  • Work area and vehicle prepared.
  • Vehicle component installed and vehicle operational.
  • Work area restored
  • Documentation completed and processed

    Indicators
  • Appropriate service data is obtained according to vehicle make and model.
  • Appropriate tools and equipment are selected and used according to acceptable workshop practices.
  • Vehicle component and component mounting area/s is cleaned prior to installation according to company procedures.
  • Vehicle component is installed according to workshop manual procedures.
  • No damage to component, vehicle, equipment and tools.
  • Adhered to all workshop manual safety warnings and required actions before, during and after vehicle component installation task.
  • Required lubrication is applied and fluid levels corrected after component installation.
  • Vehicle component installation is inspected prior to starting vehicle according to workshop manual procedures.
  • Vehicle component installation is checked after engine is started and operational condition of vehicle is checked according to workshop manual procedures.
  • Tools and equipment is stored away and work area cleaned.
  • Documentation is completed and processed in accordance with company procedures.
  • Applicable SHE procedures are followed during the vehicle component installation task.

    Understanding confirmed

    Respond to 'what if' and 'why' questions covering:
  • Installation procedures
  • Reason(s) for selecting tools and equipment
  • Reason(s) for adjustments, checks and tests.
  • Planning and preparing work area and machine. 

  • SPECIFIC OUTCOME 2 
    Install vehicle component. 
    OUTCOME RANGE 
  • Vehicle component installation includes lubricating grease points and filling up oil levels.
  • Vehicle component includes transmissions, differentials, torque converters, axles and modular type final drives. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
  • Work area and vehicle prepared.
  • Vehicle component installed and vehicle operational.
  • Work area restored
  • Documentation completed and processed

    Indicators
  • Appropriate service data is obtained according to vehicle make and model.
  • Appropriate tools and equipment are selected and used according to acceptable workshop practices.
  • Vehicle component and component mounting area/s is cleaned prior to installation according to company procedures.
  • Vehicle component is installed according to workshop manual procedures.
  • No damage to component, vehicle, equipment and tools.
  • Adhered to all workshop manual safety warnings and required actions before, during and after vehicle component installation task.
  • Required lubrication is applied and fluid levels corrected after component installation.
  • Vehicle component installation is inspected prior to starting vehicle according to workshop manual procedures.
  • Vehicle component installation is checked after engine is started and operational condition of vehicle is checked according to workshop manual procedures.
  • Tools and equipment is stored away and work area cleaned.
  • Documentation is completed and processed in accordance with company procedures.
  • Applicable SHE procedures are followed during the vehicle component installation task.

    Understanding confirmed

    Respond to 'what if' and 'why' questions covering:
  • Installation procedures
  • Reason(s) for selecting tools and equipment
  • Reason(s) for adjustments, checks and tests.
  • Planning and preparing work area and machine. 

  • SPECIFIC OUTCOME 3 
    Check and test vehicle component installation. 
    OUTCOME RANGE 
  • Vehicle component installation checks include checking for leaks, loose pipes, bolts, connections and static adjustments.
  • Vehicle installation tests include pressure checks, operational checks and dynamic adjustments. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
  • Work area and vehicle prepared.
  • Vehicle component installed and vehicle operational.
  • Work area restored
  • Documentation completed and processed

    Indicators
  • Appropriate service data is obtained according to vehicle make and model.
  • Appropriate tools and equipment are selected and used according to acceptable workshop practices.
  • Vehicle component and component mounting area/s is cleaned prior to installation according to company procedures.
  • Vehicle component is installed according to workshop manual procedures.
  • No damage to component, vehicle, equipment and tools.
  • Adhered to all workshop manual safety warnings and required actions before, during and after vehicle component installation task.
  • Required lubrication is applied and fluid levels corrected after component installation.
  • Vehicle component installation is inspected prior to starting vehicle according to workshop manual procedures.
  • Vehicle component installation is checked after engine is started and operational condition of vehicle is checked according to workshop manual procedures.
  • Tools and equipment is stored away and work area cleaned.
  • Documentation is completed and processed in accordance with company procedures.
  • Applicable SHE procedures are followed during the vehicle component installation task.

    Understanding confirmed

    Respond to 'what if' and 'why' questions covering:
  • Installation procedures
  • Reason(s) for selecting tools and equipment
  • Reason(s) for adjustments, checks and tests.
  • Planning and preparing work area and machine. 

  • SPECIFIC OUTCOME 4 
    Apply safety procedures during vehicle component installation task. 
    OUTCOME RANGE 
  • Safety includes using personal protective equipment, adhering to workshop manual warnings and dispose of hazardous materials.
  • Hazardous materials include oils, coolant, fuels and cleaning agents. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
  • Work area and vehicle prepared.
  • Vehicle component installed and vehicle operational.
  • Work area restored
  • Documentation completed and processed

    Indicators
  • Appropriate service data is obtained according to vehicle make and model.
  • Appropriate tools and equipment are selected and used according to acceptable workshop practices.
  • Vehicle component and component mounting area/s is cleaned prior to installation according to company procedures.
  • Vehicle component is installed according to workshop manual procedures.
  • No damage to component, vehicle, equipment and tools.
  • Adhered to all workshop manual safety warnings and required actions before, during and after vehicle component installation task.
  • Required lubrication is applied and fluid levels corrected after component installation.
  • Vehicle component installation is inspected prior to starting vehicle according to workshop manual procedures.
  • Vehicle component installation is checked after engine is started and operational condition of vehicle is checked according to workshop manual procedures.
  • Tools and equipment is stored away and work area cleaned.
  • Documentation is completed and processed in accordance with company procedures.
  • Applicable SHE procedures are followed during the vehicle component installation task.

    Understanding confirmed

    Respond to 'what if' and 'why' questions covering:
  • Installation procedures
  • Reason(s) for selecting tools and equipment
  • Reason(s) for adjustments, checks and tests.
  • Planning and preparing work area and machine. 

  • SPECIFIC OUTCOME 5 
    Restore work area, complete and process documentation. 
    OUTCOME RANGE 
  • Restoring work area includes disposal of hazardous materials, tools and equipment packed away,
  • Documentation includes completing job cards, check lists and reports.
  • Reports include reports and summaries of work completed
  • Process includes submissions according to company procedures. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
  • Work area and vehicle prepared.
  • Vehicle component installed and vehicle operational.
  • Work area restored
  • Documentation completed and processed

    Indicators
  • Appropriate service data is obtained according to vehicle make and model.
  • Appropriate tools and equipment are selected and used according to acceptable workshop practices.
  • Vehicle component and component mounting area/s is cleaned prior to installation according to company procedures.
  • Vehicle component is installed according to workshop manual procedures.
  • No damage to component, vehicle, equipment and tools.
  • Adhered to all workshop manual safety warnings and required actions before, during and after vehicle component installation task.
  • Required lubrication is applied and fluid levels corrected after component installation.
  • Vehicle component installation is inspected prior to starting vehicle according to workshop manual procedures.
  • Vehicle component installation is checked after engine is started and operational condition of vehicle is checked according to workshop manual procedures.
  • Tools and equipment is stored away and work area cleaned.
  • Documentation is completed and processed in accordance with company procedures.
  • Applicable SHE procedures are followed during the vehicle component installation task.

    Understanding confirmed

    Respond to 'what if' and 'why' questions covering:
  • Installation procedures
  • Reason(s) for selecting tools and equipment
  • Reason(s) for adjustments, checks and tests.
  • Planning and preparing work area and machine. 

  • SPECIFIC OUTCOME 6 
    Discuss and explain vehicle component installation task. 
    OUTCOME RANGE 
    Vehicle component installation task includes workshop manual procedures, tools and equipment, inspection, safety, prepare and restore work area. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
  • Work area and vehicle prepared.
  • Vehicle component installed and vehicle operational.
  • Work area restored
  • Documentation completed and processed

    Indicators
  • Appropriate service data is obtained according to vehicle make and model.
  • Appropriate tools and equipment are selected and used according to acceptable workshop practices.
  • Vehicle component and component mounting area/s is cleaned prior to installation according to company procedures.
  • Vehicle component is installed according to workshop manual procedures.
  • No damage to component, vehicle, equipment and tools.
  • Adhered to all workshop manual safety warnings and required actions before, during and after vehicle component installation task.
  • Required lubrication is applied and fluid levels corrected after component installation.
  • Vehicle component installation is inspected prior to starting vehicle according to workshop manual procedures.
  • Vehicle component installation is checked after engine is started and operational condition of vehicle is checked according to workshop manual procedures.
  • Tools and equipment is stored away and work area cleaned.
  • Documentation is completed and processed in accordance with company procedures.
  • Applicable SHE procedures are followed during the vehicle component installation task.

    Understanding confirmed

    Respond to 'what if' and 'why' questions covering:
  • Installation procedures
  • Reason(s) for selecting tools and equipment
  • Reason(s) for adjustments, checks and tests.
  • Planning and preparing work area and machine. 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    My assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assurance who has jurisdiction over this field of learning. My assessor will be accredited and have a technical qualification in this learning area.
    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.
    I will be assessed in the workplace but I can submit documents, projects, test results and assignments that are not produced in the workplace.
    I can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    1. Names and functions of:
  • Vehicle components
  • Tools and equipment

    2. Attributes, descriptions, characteristics and properties of:
  • Ferrous and non-ferrous metals
  • Typical problems that can be encountered during component installation checks prior and after engine start up

    3. Sensory cues:
  • What I see, hear, feel, smell during the process

    4. Purpose of:
  • Installing drive train components
  • Adhering to workshop manual procedure.
  • Cleaning component and component mounting area/s prior to installation.
  • Testing and checking component installation prior to and after starting vehicle.

    5. Regulations, legislation, agreements, policies, standards:
  • Applicable company policies and procedures
  • Workshop manual procedures
  • SHE procedures
  • Quality procedures

    6. Theory: rules, principles, laws:
  • Basic principles of ferrous and non-ferrous metals
  • Operation of components

    7. Relationships, systems:
  • Interaction of component in relation to the vehicle as a whole. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems
  • Related to installing vehicle components 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others
  • When Interact with team members and colleagues during the planning, preparation, and installation phases of the task 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities
  • When working according to service and flat rate schedules
  • When managing resources and my time 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively
  • When completing and processing documentation and service reports 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically
  • When using special service tools and equipment
  • When using information technology 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems
  • When I can explain and justify my actions and procedures followed
  • When I can explain the interaction of vehicle component in relation to the operation of the vehicle as a whole. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  24456   National Certificate: Maintaining Vehicles  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2008-02-06  Was MERSETA until Last Date for Achievement 
    Elective  78524   National Certificate: Automotive Repair and Maintenance  Level 3  NQF Level 03  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Barloworld South Africa (Pty) Ltd T/A Barloworld-Equipment (ISANDO) (T 
    2. Bell Equipment Company SA (Pty) Ltd (ALTON) (TP) 
    3. BMW SA (Pty) Ltd (ROSSLYN) (TP) 
    4. Buscor 
    5. Coastal Kzn F.E.T. College - Swinton Road Campus 
    6. DON-DER TRUCK REPAIRS TRUST 
    7. Eastcape Midlands Public FET College - Uitenhage (High Street)Campus 
    8. Eastcape Training Centre 
    9. Ekurhuleni West Public FET College - Germiston Campus 
    10. False Bay Public FET College - Westlake Campus 
    11. Hibiscus Skills Training College (HILLCREST) (TP) 
    12. HV Consultants (Pty) Ltd (PORT ELIZABETH) (TP) 
    13. Imperial Technical Training Academy (GERMISTON) (TP) 
    14. Imperial Technical Training Academy (WADEVILLE) (TP) 
    15. JMC TECHNICAL TRAINING (Bloemfontein)(TP) 
    16. KwaZulu Automotive Training Services cc (KZN) (DURBAN) (TP) 
    17. McCarthy Academy Cape Town (BLACKHEATH) (TP) 
    18. McCarthy Automotive Artisan Academy (MIDRAND) (TP) 
    19. McCarthy Automotive Artisans Academy (PINETOWN) (TP) 
    20. Mercedes Benz South Africa (Pty) Ltd (EAST LONDON) (TP) 
    21. Mopani South East FET College - Phalaborwa Campus 
    22. Nissan SA (Pty) Ltd (ROSSLYN) (TP) 
    23. PUTCO Limited 
    24. Qualitas Training cc (SELBY) (TP) 
    25. Sedibeng Artisan Skills Training Centre (VEREENIGING) (TP) 
    26. SG Coal (Pty) Ltd (TP) 
    27. Shukela Training Centre 
    28. St Anthony's Education Centre (BOKSBURG) (TP) 
    29. The Automobile Association of South Africa NPC T/A The AA Technical College(MIDRAND) (TP) 
    30. The Automobile Association of South Africa T/A AA Training Academy (MO 
    31. Toyota Academy Toyota SA Motors (Pty) Ltd (SANDTON) (TP) 
    32. Umfolozi FET College - Mandeni Campus 
    33. Umgungundlovu FET College - Plessislaer Campus 
    34. Volkswagen of South Africa (Pty) Ltd (CENTURION) (TP) 
    35. Volkswagen of South Africa (Pty) Ltd - Technical Learning Academy (UIT 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.