SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Produce components by performing engineering milling operations 
SAQA US ID UNIT STANDARD TITLE
13296  Produce components by performing engineering milling operations 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  20 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2007-05-15  2008-10-22  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2009-10-22   2012-10-22  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
258718  Produce components by performing milling operations  Level 3  NQF Level 03  16   

PURPOSE OF THE UNIT STANDARD 
The skills, values and knowledge reflected in this unit standard are required by people in the field of engineering machining.

The learning outcomes in this unit standard also contribute to the exit level outcomes required for the National Certificate in Engineering Machining (NQF level 3) and related qualifications.

Qualifying learners can carry out milling machining operations with a range of accessories and tools. The results are checked with precision measuring instruments. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as part of a progression. It is one of a series of unit standards for milling in the engineering machining skills area.

The credits allocated to this unit standard assume that a learner has already learned to:
  • Operate and monitor a milling machine to produce simple components 

  • UNIT STANDARD RANGE 
    The scope and level of this unit standard is determined by the ranges as indicated under the specific outcomes.

    The learner should be able to work autonomously with minimal supervision. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Prepare for work activity. 
    OUTCOME NOTES 
  • Interpret drawings and job instructions and determine sequence of operations
  • Prepare machine for operation including lubrication, routine maintenance and pre-operational checks
  • Check materials and tools required are at workstation
  • Perform required calculations
  • Mark out components if required 
  • OUTCOME RANGE 
    Materials may include both non-ferrous and ferrous metals and alloys 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Machined component meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. Specified machining time limits are met. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 2 
    Set milling machine. 
    OUTCOME NOTES 
  • Select and install required accessories and work holding fixtures
  • Select, prepare and install required tools
  • Select and set cutting speeds and feeds 
  • OUTCOME RANGE 
  • The range of accessories and work fixtures used must include the use of dividing heads and may include the use of rotary tables and programmable digital readouts.
  • The range of tools used includes slot drills, side and face cutters, end mills, slit saws, ripping cutters, face mills and boring heads. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Machined component meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. Specified machining time limits are met. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 3 
    Perform milling operations. 
    OUTCOME NOTES 
  • Start up and shut down milling machine
  • Monitor milling machine while in operation, making adjustments to speeds and feeds where required
  • Remove machined component on completion of milling process
  • Clean milling machine 
  • OUTCOME RANGE 
    The range of milling operations covered in this standard must include gang, end, slot, form, slitting, keyway cutting, dovetail, angles and boring 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Machined component meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. Specified machining time limits are met. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 4 
    Apply quality checks on machined component. 
    OUTCOME NOTES 
  • Select and prepare appropriate measuring equipment
  • Measure component
  • Report non-conforming components to appropriate personnel 
  • OUTCOME RANGE 
    Measuring instruments include verniers, micrometers, height, dial, slip and telescopic gauges and bevel protractors 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Machined component meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. Specified machining time limits are met. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 5 
    Recognise and report problems, changes and/or malfunctions while operating. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Machined component meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. Specified machining time limits are met. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 6 
    Record information on work done. 
    OUTCOME NOTES 
    Document conformance of component to specifications 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Machined component meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. Specified machining time limits are met. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 7 
    Work safely with due care for self, fellow workers, machines, equipment, materials and environment. 
    OUTCOME RANGE 
    Safe working practices include the use of guards, correct coolants and appropriate personal protective equipment 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Machined component meets specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. Specified machining time limits are met. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Machine is set up to accept work safely and without damage to work piece or machine
    2. Accessories and work holding fixtures selected are appropriate to task
    3. Tools selected are appropriate to material type and safety requirements
    4. Cutting speeds and feeds selected are appropriate to machine, material and tooling
    5. Materials are prepared and correctly marked out if required
    6. Machine operating instructions and worksite procedures are adhered to
    7. Adjustments during milling process are made quickly and appropriately
    8. Safe working practices are adhered to
    9. Components are measured and conformance to specification documented
    10. Problems are reported timeously to appropriate personnel
    11. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The process of milling - procedures and techniques
  • Machine accessories and set up
  • Component specifications and defects
  • Calculations
  • Applicable theory
  • Quality
  • Materials
  • Safety
  • Reporting and documentation requirements
  • Machining time limits

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    My assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assuror who has jurisdiction over this field of learning. My assessor will (at the very least) be accredited and have a technical qualification in this learning area.

    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.

    I will be assessed in the workplace but I can submit documents, projects, test results and assignments that were not produced in the workplace.

    I can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names & functions of:
  • Accessories
  • Work holding fixtures
  • Tools (geometry and composition)
  • Measuring equipment
  • Personal protective equipment
  • Common defects on components

    Attributes, descriptions, characteristics & properties:
  • Material types
  • Machining time limits

    Purpose of:
  • Milling operations covered by this unit standard
  • Material preparation
  • Safety checks

    Processes, events, causes and effects, implications:
  • Implications of selecting inappropriate accessories, work holding fixtures, tools, cutting speeds and feeds
  • Implications of incorrect installation of accessories, work holding fixtures and tools
  • Implications of component not meeting specifications, e.g. poor finishes, uneven surface textures, incorrect size
  • Implications and consequences of situations such as, e.g. damaged or faulty equipment, allowing faulty processes to continue, delaying reports about changing conditions
  • Implications of not meeting machining time limits

    Procedures and techniques:
  • Set up procedures for milling machine
  • Milling operations and procedures covered by this unit standard
  • Measuring procedures
  • Machine cleaning procedures
  • Recording and reporting procedures

    Regulations, legislation, agreements, policies, standards:
  • Applicable safety, health and environmental protection legislation and standards
  • Applicable quality standards and specifications

    Theory: rules, principles, laws:
  • Applicable machining theory covering speeds and feeds, material properties and the underlying principles of milling
  • Applicable mathematical concepts including geometry, trigonometry and algebra
  • Applicable underlying scientific concepts

    Relationships, systems:
  • The relationship of the drawing to the machined component 


  • Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Recognise problems while machining components and respond appropriately 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • Plan sequence of operations based on job requirements and set up machine appropriately 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • Collect sensory and numeric information from the process and the machined component
  • Classify the information and identify deviations from the norm 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Record outputs, incidents, measurements
  • Report incidents and conditions
  • Respond to questions or requests for more details 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Understand and explain machining theory and mathematical and scientific concepts underpinning the machining operation 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • The relationship of the drawing to the final machined component
  • The purpose and uses of the machined component 

  • UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 258718, which is "Produce components by performing milling operations", Level 3, 16 credits. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  23255   National Certificate: Mechanical Engineering: Fitting and Machining  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Core  23278   National Certificate: Mechanical Engineering: Machining  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2008-10-22  Was MERSETA until Last Date for Achievement 
    Core  23280   National Certificate: Mechanical Engineering: Tooling Manufacture  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2008-10-22  Was MERSETA until Last Date for Achievement 
    Elective  49646   Further Education and Training Certificate: Manufacturing Technical Maintenance  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  AgriSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.