SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Prepare product from the industrial rubber manufacturing process for the next stage or for storage 
SAQA US ID UNIT STANDARD TITLE
13166  Prepare product from the industrial rubber manufacturing process for the next stage or for storage 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  10 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Learners who are involved in preparing product from an industrial rubber manufacturing process for the next stage or for storage require the skills, values and knowledge reflected in this unit standard.

Qualifying learners can carry out post-production and finishing operations with manufactured product in an industrial rubber manufacturing process. They will understand the importance of adding value to the product and how this is achieved.

The learning outcomes in this unit standard also contribute to the exit level outcomes required for the National Certificate in Rubber Manufacturing (Mixing, Extruding, Moulding or Calendaring) (NQF level 2) and related qualifications. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as part of a progression. It is one of a series of unit standards for producing product in an industrial rubber manufacturing setting.

The credits allocated to this unit standard assume that a learner has already learned to:
  • Maintain a safe and productive work area. 

  • UNIT STANDARD RANGE 
    The ranges as indicated under the specific outcomes determine the scope and level of this unit standard.

    All work is performed under supervision and according to worksite and manufacturer specifications and occupational safety, health and environmental legislation. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Plan and prepare for activity. 
    OUTCOME RANGE 
  • Planning and preparing includes collecting job cards, schedules, determining packing and finishing requirements for product or components and preparing work area.
  • Preparing work area includes fetching components for packing, labelling, etc. and laying out items in work area. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Components are ready for the next stage or for storage. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 2 
    2. No damage to equipment or product occurs while working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 3 
    3. Records are completed and processed and reports are made. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 4 
    Results achieved

    1. Components are ready for the next stage or for storage.
    2. No damage to equipment or product occurs while working.
    3. Records are completed and processed and reports are made.

    Indicators

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements.
    2. Problems are identified in a timely manner and appropriate corrective action is taken.
    3. Reports and records are accurate and clear, and correct terminology is used.
    4. Applicable health, safety and environmental procedures are followed.
    5. Protective equipment is selected and worn / used.

    Understanding confirmed

    1. Respond to `what if and `why` questions related to:
  • Procedures and processes.
  • Product requirements.
  • Incidents and problems. 

  • SPECIFIC OUTCOME 2 
    Apply finishing procedures. 
    OUTCOME RANGE 
    Finishing procedures include marking, labelling, stamping, packing, wrapping, stacking, nesting, assembling components, simple product testing for print adhesion, circularity/ squareness, warping, leaks, thickness, weight / mass, fit, number, colour, transparency / opacity. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Components are ready for the next stage or for storage. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 2 
    2. No damage to equipment or product occurs while working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 3 
    3. Records are completed and processed and reports are made. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 4 
    Results achieved

    1. Components are ready for the next stage or for storage.
    2. No damage to equipment or product occurs while working.
    3. Records are completed and processed and reports are made.

    Indicators

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements.
    2. Problems are identified in a timely manner and appropriate corrective action is taken.
    3. Reports and records are accurate and clear, and correct terminology is used.
    4. Applicable health, safety and environmental procedures are followed.
    5. Protective equipment is selected and worn / used.

    Understanding confirmed

    1. Respond to `what if and `why` questions related to:
  • Procedures and processes.
  • Product requirements.
  • Incidents and problems. 

  • SPECIFIC OUTCOME 3 
    Carry out post-production operations. 
    OUTCOME RANGE 
  • Post-production operations include claming, placing into fixtures or jigs, machining, drilling, chamfering, trimming, cutting, separating runners, sprues, neck and tail flash, cleaning off residues, polishing, wiping, washing, dusting, removing and installing reels, lifting and removing product or product containers, conditioning, annealing or post-cure.
  • Product and customer requirements include clean, aseptic, visual appearances, function and effectiveness. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Components are ready for the next stage or for storage. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 2 
    2. No damage to equipment or product occurs while working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 3 
    3. Records are completed and processed and reports are made. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 4 
    Results achieved

    1. Components are ready for the next stage or for storage.
    2. No damage to equipment or product occurs while working.
    3. Records are completed and processed and reports are made.

    Indicators

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements.
    2. Problems are identified in a timely manner and appropriate corrective action is taken.
    3. Reports and records are accurate and clear, and correct terminology is used.
    4. Applicable health, safety and environmental procedures are followed.
    5. Protective equipment is selected and worn / used.

    Understanding confirmed

    1. Respond to `what if and `why` questions related to:
  • Procedures and processes.
  • Product requirements.
  • Incidents and problems. 

  • SPECIFIC OUTCOME 4 
    Identify problems and take corrective action. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Components are ready for the next stage or for storage. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 2 
    2. No damage to equipment or product occurs while working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 3 
    3. Records are completed and processed and reports are made. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 4 
    Results achieved

    1. Components are ready for the next stage or for storage.
    2. No damage to equipment or product occurs while working.
    3. Records are completed and processed and reports are made.

    Indicators

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements.
    2. Problems are identified in a timely manner and appropriate corrective action is taken.
    3. Reports and records are accurate and clear, and correct terminology is used.
    4. Applicable health, safety and environmental procedures are followed.
    5. Protective equipment is selected and worn / used.

    Understanding confirmed

    1. Respond to `what if and `why` questions related to:
  • Procedures and processes.
  • Product requirements.
  • Incidents and problems. 

  • SPECIFIC OUTCOME 5 
    Record information, and report on work done. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Components are ready for the next stage or for storage. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 2 
    2. No damage to equipment or product occurs while working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 3 
    3. Records are completed and processed and reports are made. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 4 
    Results achieved

    1. Components are ready for the next stage or for storage.
    2. No damage to equipment or product occurs while working.
    3. Records are completed and processed and reports are made.

    Indicators

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements.
    2. Problems are identified in a timely manner and appropriate corrective action is taken.
    3. Reports and records are accurate and clear, and correct terminology is used.
    4. Applicable health, safety and environmental procedures are followed.
    5. Protective equipment is selected and worn / used.

    Understanding confirmed

    1. Respond to `what if and `why` questions related to:
  • Procedures and processes.
  • Product requirements.
  • Incidents and problems. 

  • SPECIFIC OUTCOME 6 
    Discuss and explain incidents and problems related to preparing product for the next stage. 
    OUTCOME NOTES 
    Discuss and explain incidents and problems related to preparing product for the next stage or for storage. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Components are ready for the next stage or for storage. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 2 
    2. No damage to equipment or product occurs while working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 3 
    3. Records are completed and processed and reports are made. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 4 
    Results achieved

    1. Components are ready for the next stage or for storage.
    2. No damage to equipment or product occurs while working.
    3. Records are completed and processed and reports are made.

    Indicators

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements.
    2. Problems are identified in a timely manner and appropriate corrective action is taken.
    3. Reports and records are accurate and clear, and correct terminology is used.
    4. Applicable health, safety and environmental procedures are followed.
    5. Protective equipment is selected and worn / used.

    Understanding confirmed

    1. Respond to `what if and `why` questions related to:
  • Procedures and processes.
  • Product requirements.
  • Incidents and problems. 

  • SPECIFIC OUTCOME 7 
    Work safely with due care for self, fellow workers, equipment, materials and the environment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Components are ready for the next stage or for storage. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 2 
    2. No damage to equipment or product occurs while working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 3 
    3. Records are completed and processed and reports are made. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements
    2. Problems are identified in a timely manner and appropriate corrective action is taken
    3. Reports and records are accurate and clear, and correct terminology is used
    4. Applicable health, safety and environmental procedures are followed
    5. Protective equipment is selected and worn / used

    Understanding confirmed:

    Respond to 'what if and 'why' questions related to:
  • Procedures and processes
  • Product requirements
  • Incidents and problems 

  • ASSESSMENT CRITERION 4 
    Results achieved

    1. Components are ready for the next stage or for storage.
    2. No damage to equipment or product occurs while working.
    3. Records are completed and processed and reports are made.

    Indicators

    1. Operations and procedures to the finished or semi-finished product are carried out accurately and consistently, safely, in a timely manner and to customer requirements.
    2. Problems are identified in a timely manner and appropriate corrective action is taken.
    3. Reports and records are accurate and clear, and correct terminology is used.
    4. Applicable health, safety and environmental procedures are followed.
    5. Protective equipment is selected and worn / used.

    Understanding confirmed

    1. Respond to `what if and `why` questions related to:
  • Procedures and processes.
  • Product requirements.
  • Incidents and problems. 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    My assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assuror who has jurisdiction over this field of learning. My assessor will (at the very least) be accredited and have a technical qualification in this learning area.

    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.

    I will be assessed in the workplace but I can submit documents, projects, test results and assignments that were not produced in the workplace.

    I can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    1. Names & functions of:
  • Components.
  • Procedures, operations and tests.
  • Units of measure.

    2. Purpose of:
  • Components, tools, equipment.
  • Operations, procedures.

    3. Attributes, descriptions, characteristics & properties:
  • Specifications and product requirements.

    4. Cause and effect, implications:
  • Impact and consequences of poor product handling.

    5. Procedures and techniques:
  • Dealing with problems.
  • Reporting.
  • Related to the specific operations being carried out.
  • Safety.

    6. Regulations, legislation, agreements, policies, standards:
  • Applicable health, safety and environmental protection legislation.
  • Applicable company quality policies and procedures.

    7. Theory: rules, principles, laws:
  • Applicable scientific and mathematical principles related to the operations, e.g. measuring, counting, numbering.

    8. Relationships, systems:
  • In-service requirements related to products.
  • Customer requirements. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Identify and respond to problems. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others:
  • Contribute to the workgroup`s effort to prepare product for the next stage or for storage. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • Work to achieve consistent results required by the process or customer.
  • Manage resources and my own time. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • Interpret information off job instructions.
  • Make decisions based on that information. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Report incidents and problems.
  • Respond to questions or requests for more detail. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Use tools, instruments and components to complete production operations and packaging. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Adapt general procedures for specific purposes and situations required for a particular product or customer.
  • Relate my activities to the broader manufacturing process. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  23257   National Certificate: Industrial Rubber Manufacturing: Mixing OR Extruding OR Moulding OR Calendaring  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2011-02-16  MERSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. BPC HR Solutions (PRETORIA) (TP) 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.