SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Supply raw and processed material to production line 
SAQA US ID UNIT STANDARD TITLE
12667  Supply raw and processed material to production line 
ORIGINATOR
SGB Textiles 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Engineering and Related Design 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2006-07-04  2009-07-04  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2010-07-04   2013-07-04  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Learners credited with this standard will be able to determine material requirements, quantities and time frames, determine material sources and supply material to various points in a particular process within textile processes. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
Appropriate credits in literacy and numeracy at NQF Level 1. 

UNIT STANDARD RANGE 
  • Materials will include raw materials, processed material and products in the manufacture of polymers, fibres, yarns, non wovens and fabrics, and includes dye stuffs and chemicals, finishes and auxiliaries.
  • Materials will include only those that are input material to the product and excludes those out of direct control such as water, steam, air and electricity, where the supply of these are monitored and found of standard appropriate adjustments are made.
  • This standard applies to processes involving the manufacturing of polymers, fibres, yarns, non-wovens and fabrics and includes the preparation, dyeing, printing and finishing. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Determine material requirements, quantities and times 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Appropriate requisitions are accurately compiled using specified documentation, electronic systems. 

    ASSESSMENT CRITERION 2 
    2. Production plans and product specifications are correctly interpreted. 

    ASSESSMENT CRITERION 3 
    3. Material requirements are accurately calculated against production plans and product specifications. 

    ASSESSMENT CRITERION 4 
    4. Material requirements are accurately recorded by identification, type, grade, quantity, section and time required. 

    ASSESSMENT CRITERION 5 
    5. Material is accurately marked using specified company identification and marking systems and procedures. 

    SPECIFIC OUTCOME 2 
    Determine material sources 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Sources are identified from external suppliers according to product specifications and identification. 

    ASSESSMENT CRITERION 2 
    2. Sources are identified from internal suppliers according to product specifications and identification. 

    ASSESSMENT CRITERION 3 
    3. Locations of warehouses, stores, holding bays, bins and areas are identified. 

    ASSESSMENT CRITERION 4 
    4. Storage techniques are recognised and specified techniques are correctly applied according to materials. 

    SPECIFIC OUTCOME 3 
    Supply material to various points in the process 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Materials are transported according to company and legislative procedures. 

    ASSESSMENT CRITERION 2 
    2. Specified equipment is correctly used according to company and legislative procedures. 

    ASSESSMENT CRITERION 3 
    3. Supplied materials are correctly identified using labels, colour codes, documentation, according to the company identification procedures. 

    ASSESSMENT CRITERION 4 
    4. Bottlenecking risks, in respect of material build up/shortage, are timeously identified and reported according to company reporting procedures. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    Appropriate ETQAs within the Engineering Manufacturing and Technology field and the Education and Training Board for the Textile Industry will accredit providers and assessors. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Learners will engage with the following knowledge components:
  • Explain the importance of meeting requirements in terms of material quantities and times.
  • Demonstrate a broad understanding of the material requirements as it applies to a particular production process.
  • Understand safety as it applies the movement of material. 


  • Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems at points requiring supply of materials. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others ensuring correct flow and that material requirements are met in terms of quantities and time. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively to ensure that materials supplied meet the requirements of those receiving them. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology through appropriate equipment which is used to move material from point to point. 

    UNIT STANDARD CCFO CONTRIBUTING 
    Understand the world as being made up of a set of related systems where the consequences of unsafe transportation are recognised. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  65809   National Certificate: Automotive Manufacturing and Assembly  Level 2  NQF Level 02  Reregistered  2023-06-30  MERSETA 
    Core  58781   National Certificate: Production Technology  Level 2  NQF Level 02  Reregistered  2023-06-30  MERSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. BMW SA (Pty) Ltd (ROSSLYN) (TP) 
    2. Career Pathing Solutions (Pty) Ltd (KRUGERSDORP) (TP) 
    3. College of Production Technology 
    4. CREATIVE FOUNDATION TRAINING 
    5. HV Consultants (Pty) Ltd (PORT ELIZABETH) (TP) 
    6. Institute for Telling Development T/A ITD Training (MENLYN PARK) (TP) 
    7. JESUA CONSULTANTS (Hartenbos) (WA) 
    8. Jesua Consultants (Pty) Ltd (MOSSEL BAY) (TP) 
    9. MacSteel Services Centres SA (WADEVILLE) (TP) 
    10. Mercedes Benz South Africa (Pty) Ltd (EAST LONDON) (TP) 
    11. Nissan SA (Pty) Ltd (ROSSLYN) (TP) 
    12. OPTIMUM LEARNING TECHNOLOGIES PTY LTD 
    13. Organisational Development International (TP) 
    14. Plastics Federation of South Africa (MAITLAND) (TP) 
    15. Plastics Federation of South Africa (MIDRAND) (TP) 
    16. Plastics Federation of South Africa (WESTMEAD) (TP) 
    17. Production Management Institute 
    18. Production Management Institute of Southern Africa (PMI) 
    19. Production Management Institute of Southern Africa (PMI) - Johannesburg 
    20. Production Management Institute of Southern Africa - Durban 
    21. PRODUCTION MANAGEMENT INSTITUTE SA PTY LTD (PORT ELIZABETH) 
    22. QTE Training & Consulting cc T/A QTE (GERMISTON) (TP) 
    23. Rema Tip Top SA (Pty) Ltd (BENONI) (TP) 
    24. Sabela Learning Academy 
    25. Scaw Metals Group (Pty) Ltd T/A Scaw Metals (DINWIDDIE) (TP) 
    26. SSS Sheet Metal Work cc T/A Sheetech SA (DURBAN) (TP) 
    27. THE NEW RECLAMATION GROUP (PTY) LTD (Prospecton) (TP) 
    28. Training Force (Pty) Ltd 
    29. Training Force (Pty) Ltd (Durban) (TP) 
    30. Volkswagen of South Africa (Pty) Ltd - Technical Learning Academy (UIT 
    31. Wide Horizon Advanced Training (PORT ELIZABETH) (TP) 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.