SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Install and remove locks 
SAQA US ID UNIT STANDARD TITLE
123595  Install and remove locks 
ORIGINATOR
SGB Security 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 08 - Law, Military Science and Security Safety in Society 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Learners credited with this unit standard are able to determine the work required on a lock, evaluate if the lock needs to be replaced. Learners are able to install, remove and replace a lock in accordance with standards and procedures.

The qualifying learner is able to:
  • Describe the use of tools.
  • Perform the installation of a lock.
  • Perform the removal and replacement of a lock. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
  • Communication at NQF Level 2.
  • Mathematical Literacy at NQF Level 2.
  • Maintain a safe and tidy working environment (ID 123589).
  • Maintain key cutting machines (ID 123593).
  • Duplicate and cut keys (ID 123591). 

  • UNIT STANDARD RANGE 
  • Installation also refers to both installation and removal of locks. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Describe the use of tools. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Tools are identified in accordance with job specifications. 

    ASSESSMENT CRITERION 2 
    Tools are described in terms of their uses. 

    ASSESSMENT CRITERION 3 
    Tools are selected in accordance with job specifications. 

    SPECIFIC OUTCOME 2 
    Perform the installation of a lock. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The area where the lock is to be installed is prepared so as to allow for work to be done efficiently. 

    ASSESSMENT CRITERION 2 
    Lock is installed in accordance with job specifications. 

    ASSESSMENT CRITERION 3 
    Quality of installation is checked against the job specifications. 

    SPECIFIC OUTCOME 3 
    Perform the removal and replacement of a lock. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Lock is removed without damaging the lock or its surroundings. 

    ASSESSMENT CRITERION 2 
    Lock is inspected to determine whether it should be replaced or repaired. 
    ASSESSMENT CRITERION RANGE 
    Inspection includes but is not limited to testing.
     

    ASSESSMENT CRITERION 3 
    Lock is replaced in accordance with job specifications. 

    ASSESSMENT CRITERION 4 
    Lock is inspected in order to ensure its working order. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An individual wishing to be assessed (including through RPL) against this unit standard may apply to an assessment agency, assessor or provider institution accredited by the relevant ETQA.
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard or assessing this unit standard must be accredited as a provider with the relevant ETQA.
  • Moderation of assessment will be conducted by the relevant ETQA at its discretion. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Locking systems.
  • Tools and equipment used in locksmithing.
  • Lock mechanics. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems relating to the repairing or replacement of a lock. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others when evaluating the appropriate method to use when repairing a lock. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one's activities when completing payment documentation and general administration. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, evaluate, organise and critically evaluate information when preparing to install, repair or replace a lock. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively when completing required administrative documentation. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology to generate and issue invoices. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems where the correct use of equipment leads to a safe working environment. 

    UNIT STANDARD CCFO CONTRIBUTING 
    In order to contribute to the full personal development of each learner and the social and economic development of society at large, it must be the intention underlying any programme of learning to make an individual aware of the importance of reflecting on and exploring a variety of strategies to learn more effectively. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  50541   National Certificate: Locksmithing  Level 3  NQF Level 03  Reregistered  2023-06-30  SAS SETA 
    Elective  58785   National Certificate: Production Technology  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.