SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Demonstrate an understanding of firearm surface treatments 
SAQA US ID UNIT STANDARD TITLE
119782  Demonstrate an understanding of firearm surface treatments 
ORIGINATOR
SGB Combat Weapons Maintenance 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 08 - Law, Military Science and Security Safety in Society 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Learners credited with this Unit Standard are able to explain surface treatments that are used in the firearms maintenance industry. A person credited with this unit standard will not apply surface treatments. He/she will identify and explain different surface treatments, their preparation methods, identify defects and send defective firearms to the appropriate specialist unit. A person credited with this unit standard will be able to:
  • Describe the effects of surface treatment chemicals on the environment and health of persons.
  • Explain the reasons for applying surface treatment to firearms.
  • Explain the different surface treatments and their respective preparation methods.
  • Explain the defects found in and on different types of surface treatment. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that the learner embarking on study towards this unit standard will have the following:
  • Communication at NQF level 3.
  • Mathematical Literacy at NQF level 3. 

  • UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Describe the effects of surface treatment chemicals on the environment and health of persons. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The influence of surface treatment chemicals on the environment is explained in terms of the Safety, Health and Environmental Act. 

    ASSESSMENT CRITERION 2 
    The influence of surface treatment chemicals on health of persons is explained in accordance with the Safety, Health and Environmental Act. 

    ASSESSMENT CRITERION 3 
    Organisational practices that ensure the safe usage of surface treatments are explained in accordance with organisational policy. 

    SPECIFIC OUTCOME 2 
    Explain the reasons for applying surface treatment to firearms. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Influencing environment effects on firearms are explained in terms of the use of surface treatments. 

    ASSESSMENT CRITERION 2 
    Reasons for lubrication of firearms are explained in terms of the use of surface treatments. 

    ASSESSMENT CRITERION 3 
    Effects on surface treatment when handling firearms are explained in terms of the use of surface treatments. 

    SPECIFIC OUTCOME 3 
    Explain the different surface treatments and their respective preparation methods. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Browning or blueing of firearms and their preparations are explained according to manufacturer's specifications. 

    ASSESSMENT CRITERION 2 
    Phosphating of firearms and its preparation is explained according to manufacturer's specifications. 

    ASSESSMENT CRITERION 3 
    Anodising of firearms and its preparation is explained according to manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    Types of plating of firearms and their preparations are explained according to manufacturer's specifications. 

    ASSESSMENT CRITERION 5 
    Painting/non-metallic coating of firearms is explained according to manufacturer's specifications. 

    SPECIFIC OUTCOME 4 
    Explain the defects found in and on different types of surface treatment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Defects in and on gun browning or blueing of firearms are explained according to manufacturer's specifications. 

    ASSESSMENT CRITERION 2 
    Defects in and on phosphating of firearms are explained according to manufacturer's specifications. 

    ASSESSMENT CRITERION 3 
    Defects in and on anodising of firearms are explained according to manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    Defects in and on the types of plating of firearms are explained according to manufacturer's specifications. 

    ASSESSMENT CRITERION 5 
    Defects in and on painting/none-metallic coating of firearms are explained according to manufacturer's specifications. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An individual wishing to be assessed (including through RPL) against this Unit Standard may apply to an assessment agency, assessor or provider institution accredited by the relevant ETQA, or an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Anyone assessing a learner against this Unit Standard must be registered as an assessor with the relevant ETQA or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this Unit Standard or assessing this Unit Standard must be accredited as a provider with the relevant ETQA or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Moderation of assessment will be conducted by the relevant ETQA at its discretion. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    N/A 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identifying and solving problems in which responses display that responsible decisions using critical and logical thinking when applying knowledge of surface treatment to firearms. 

    UNIT STANDARD CCFO WORKING 
    Working effectively with others as a member of a team, group, organisation and community when applying knowledge of surface treatment to firearms. 

    UNIT STANDARD CCFO ORGANISING 
    Organising and managing oneself and one's activities responsibly and effectively when applying knowledge of surface treatment to firearms. 

    UNIT STANDARD CCFO COLLECTING 
    Collecting, analysing, organising and critically evaluating information with regards to any situation when applying knowledge of surface treatment to firearms. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicating effectively using visual and language skills in the modes of oral and/or written persuasion when applying knowledge of surface treatment to firearms. 

    UNIT STANDARD CCFO SCIENCE 
    Using science and technology effectively and critically, showing responsibility towards the environment and health of others when applying knowledge of surface treatment to firearms. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrating an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation when applying knowledge of surface treatment to firearms. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Access to this unit standard:

    For safety requirements learners embarking on study towards this unit standard must have completed the unit standard Apply safety precautions in the maintenance of firearms. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  49739   Further Education and Training Certificate: Firearms Maintenance  Level 4  NQF Level 04  Reregistered  2023-06-30  SAS SETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.