SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Set up ancillary process equipment for plastics manufacturing operations 
SAQA US ID UNIT STANDARD TITLE
119188  Set up ancillary process equipment for plastics manufacturing operations 
ORIGINATOR
SGB Plastics Manufacturing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
In order for me to perform effectively in the field of plastics manufacturing, I will be able to:
  • Set up at least two different types of ancillary equipment required for the production process.

    I will also know and understand:
  • The role and function of the ancillary equipment in the production process and the requirements of each piece of equipment.

    I can be assessed against this unit standard in the context of any volume plastics manufacturing process, eg
  • Injection moulding
  • Blow moulding
  • Various kinds of extrusion
  • Variations of thermoforming
  • Rotational moulding
  • Calendaring
  • Compression and related moulding processes
  • Reaction injection moulding
  • Polymer composites fabrication processes such as pultrusion, filament winding and resin injection.

    The volume production process also includes the regeneration of recycled materials and the manufacture of intermediate products such as sheet, profiles, compounds and master batches.

    The skill, knowledge and values reflected in this unit standard form part of the exit level outcomes required for the National Certificate in Plastics Manufacturing NQF Level 4. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The credits for this unit standard assume that I have a National Certificate in Plastics Manufacturing NQF Level 3 or an equivalent qualification. They also assume that I am working towards my qualification as part of a learning programme which integrates all the required unit standards.

    My learning time will increase if I do not have:
  • A relevant NQF 3 qualification
  • Experience in a relevant field.

    My learning time will be decreased if I have experience in this field because:
  • My learning programme will be adjusted to build on what I already know
  • I can apply to have that prior learning recognised. 

  • UNIT STANDARD RANGE 
  • Learners who are involved in setting up ancillary process equipment for production require the skills, values and knowledge reflected in this unit standard.
  • The scope and level of this unit standard is indicated by range statements related to the specific outcomes.
  • The learner should be able to work autonomously with minimal supervision. The work will be guided by relevant worksite procedures, manufacturers' specifications and safety, health and environmental legislation. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Determine product and process requirements and identify and collect required ancillary process equipment. 
    OUTCOME RANGE 
    Ancillary equipment includes dosing equipment, pick and place robots, packaging equipment, external temperature controllers, conveying equipment, in-line testing devices, cut-off saws, belling equipment, in-line marking devices. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment, and
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts)
    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 2 
    Plan set up, prepare and set up ancillary equipment and connect related services. 
    OUTCOME RANGE 
  • Set up includes, installing, connecting, setting, cleaning
  • Prepare includes interacting with others before and during the process 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment, and
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).
    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 3 
    Start up manufacturing process and adjust ancillary equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment, and
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).
    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 4 
    Recognise and respond to problems with ancillary process equipment during production. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment, and
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).
    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 5 
    Engage in discussions with other parties on issues related to setting up ancillary process equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Required ancillary process equipment is set up and operational. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Results achieved 
    ASSESSMENT CRITERION RANGE 
    Evidence presented indicates that at least two different pieces of ancillary equipment are set up.
     

    ASSESSMENT CRITERION 2 
    No delays are caused by poor planning or wrong equipment settings. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator 

    ASSESSMENT CRITERION 3 
    No damage is caused during set up. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator 

    ASSESSMENT CRITERION 4 
    Setting up is done according to relevant procedures. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator 
    ASSESSMENT CRITERION RANGE 
    Setting up includes planning, preparation, and any related processes.
     

    ASSESSMENT CRITERION 5 
    Problems are communicated to appropriate personnel without delay. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator 

    ASSESSMENT CRITERION 6 
    A clean and tidy work environment is maintained. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator 

    ASSESSMENT CRITERION 7 
    Work is carried out in a safe manner. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator 

    ASSESSMENT CRITERION 8 
    Discussions of issues demonstrate that I have an understanding of the key concepts and principles related to setting up ancillary process equipment and an understanding of how these relate to application in practice. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Understanding confirmed 
    ASSESSMENT CRITERION RANGE 
    Issues, key concepts and principles include:
  • The role and function of ancillary process equipment
  • Set up procedures
  • Safety, health and environment critical issues
     


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • To obtain credits I must be assessed. The assessment will be based on evidence that I produce. My assessment will be governed by the policies and guidelines of a relevant Education and Training Quality Assurance body (ETQA), which has jurisdiction over this field of learning. The policies and procedures of the relevant ETQA will also determine:
    > How my assessment is moderated
    > How I can appeal against the outcome of the assessment
  • Any institution or company which offers learning that will enable me to achieve the purpose of this unit standard must be accredited as a provider through the relevant ETQA.
  • My assessment against this standard should meet all the requirements of established principles. It should include practical assessment activities, which are appropriate to the contents of this unit standard. These activities should include an appropriate combination of self and peer assessment, practical and oral assessments, observations, etc.
  • I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.
  • I will be assessed on all the specific outcomes, critical cross-field outcomes and essential embedded knowledge. The specific outcomes must be assessed in their own right, through oral and practical evidence. My assessment will not only be based on observation but also on other evidence which I compile into a portfolio of evidence. I cannot be assessed only through a written or oral test.
  • The specific outcomes and essential knowledge will be assessed in relation to each other. If I am able to explain the items which fall under the heading of essential embedded knowledge, but am unable to perform the specific outcomes, then I cannot be assessed as 'competent'. Similarly, if I am able to perform tasks described under the specific outcomes, but cannot explain or justify them in terms of the fundamental concepts, principles and practice relevant to the level of the unit standard that underpins my skill, then I cannot be assessed as 'competent'.
  • I will also be assessed on my ability to apply the principles and techniques related to the critical cross-field outcomes, not only in terms of what I can demonstrate, but also in terms of what I know and can discuss.
  • My assessment for this unit standard can be done in conjunction with the assessment of other unit standards related to a qualification, and even in conjunction with my assessment for the qualification as a whole. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names and functions of:
  • Ancillary process equipment

    Purpose of:
  • Ancillary process equipment

    Attributes, descriptions, characteristics and properties:
  • Product or material related requirements or properties related to ancillary process equipment

    Processes and events:
  • Set up process
  • Equipment operations, equipment breakdown
  • Maintenance
  • Power failures

    Causes and effects, implications of:
  • Impact of ancillary process equipment on product quality and cost
  • Poor set up
  • Possible problem areas

    Procedures and techniques:
  • Set up
  • Sensory cues:
  • Sensory cues (what I see, hear, smell, feel) used to identify problems during set up and running of equipment

    Regulations, legislation, agreements, policies, standards:
  • Applicable safety, health and environmental protection legislation
  • Applicable company policies and procedures
  • Equipment manufacturers specifications

    Theory: rules, principles, laws:
  • Related mechanical/electrical principles for process equipment functioning

    Categories:
  • Of ancillary process equipment

    Relationships, systems:
  • The relationship between the ancillary process equipment, the production process and product quality 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Recognise and respond to problems related to set up and functioning of ancillary equipment. 

    UNIT STANDARD CCFO WORKING 
    Interact with others to set up ancillary process equipment. 

    UNIT STANDARD CCFO ORGANISING 
    According to procedures, following regular, consistent, methodical work patterns. 

    UNIT STANDARD CCFO COLLECTING 
    Related to the process of setting up the ancillary equipment. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate set-up problems to appropriate personnel. 

    UNIT STANDARD CCFO SCIENCE 
    Apply and explain relevant basic mechanical/electrical theory as it applies to the functioning of ancillary process equipment. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Explain the relationship between the ancillary process equipment and the production process. 

    UNIT STANDARD ASSESSOR CRITERIA 
    My assessor will be registered and have a plastics manufacturing qualification at NQF 6 or higher. In the absence of assessors with such qualifications, the ETQA can make interim arrangements. My assessor should also be active in the industry and be familiar with the materials, machinery, products and level of technology in which I have contextualised my skills and knowledge. 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  49451   Further Education and Training Certificate: Plastics Manufacturing  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Elective  57898   Further Education and Training Certificate: Printing and Manufacture of Packaging  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered" 
    2015-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.