SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Add new services to conditional access systems 
SAQA US ID UNIT STANDARD TITLE
115042  Add new services to conditional access systems 
ORIGINATOR
SGB Audio-visual Media Production 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 04 - Communication Studies and Language Communication Studies 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 5  Level TBA: Pre-2009 was L5  20 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard will be essential to technically skilled people who work in the broadcasting environment and need to use sophisticated methods and equipment to install, set-up, operate and fault find professional microwave and satellite broadcasting equipment.
Learners are required to systematically analyse a range of problems and isolate and diagnose their causes. The problems emanate from the complexities and pressures of the broadcast environment in which immediate and appropriate responses are needed to solve technical problems.

People credited with this standard will be able to:
  • Explain conditional access installation and configuration
  • Plan new services
  • Add new services to Conditional Access Systems
  • Solve problems when adding new services
  • Comply with workplace health and safety requirements during the adding of new services 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The credit value is based on the assumption that people starting to learn towards this unit standard already understand:
  • Computer hardware and software
  • Data (multimedia) principles
  • Computer Network principles
  • Faultfinding and recovery of broadcast head-end faults
  • Preventative maintenance on head-end broadcast equipment and systems 

  • UNIT STANDARD RANGE 
    Specific range statements are provided in the body of the unit standard where they apply to particular specific outcomes or assessment criteria 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Explain conditional access installation and configuration. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The installation and configuration of conditional access as applied in the organisation is explained accurately 
    ASSESSMENT CRITERION RANGE 
    Range Service Information (SI), Programme Specific Information (PSI), Conditional Access, Event Information System, SMS Management, Redundancy Management, Service Information Generator, Code Download, One or more Subscriber Management Systems, One or more Multiplexers, One or more Scheduling Systems, Smart Card Personalization, Security Systems, Redundancies, System limitations, Operating requirements, Growth considerations, ECM generation, SI generation, EMM generation, System configuration, DVB network configuration, Smart cards
    Subscriber Management System console and interface, System monitor
     

    ASSESSMENT CRITERION 2 
    The installation and configuration of Stand Alone Scrambler (SAS) is explained accurately 

    ASSESSMENT CRITERION 3 
    The installation and configuration of Conditional Access Encryptor is explained accurately 

    ASSESSMENT CRITERION 4 
    The Conditional Access Code download tool configuration for Code Download services is explained accurately 

    ASSESSMENT CRITERION 5 
    Decoder qualification is explained in terms of conditional access message handling and service information handling 

    SPECIFIC OUTCOME 2 
    Plan new services. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The business requirements for new services are assessed accurately 
    ASSESSMENT CRITERION RANGE 
    In terms of the contribution feed, whether services are locally produced or backhauled, the bandwidth requirements, bandwidth availability and compression encoders
     

    ASSESSMENT CRITERION 2 
    Electronic Programme Guide Information is prepared as per EPG department procedure 

    ASSESSMENT CRITERION 3 
    Approval of additional services are obtained from relevant authority in accordance with worksite procedures 

    ASSESSMENT CRITERION 4 
    Approval for processes and back-out plans is obtained from relevant authority 

    ASSESSMENT CRITERION 5 
    Special equipment, where needed, is obtained before adding of new services 

    ASSESSMENT CRITERION 6 
    Materials, test equipment, broadcast equipment and tools needed for the addition of new service activities are obtained in accordance with the worksite procedures 

    ASSESSMENT CRITERION 7 
    The addition of new service activities are planned to cause minimum disruption to the workflow and are planned around important events 

    ASSESSMENT CRITERION 8 
    MPEG-2 is explained in terms of digital video, digital audio, private data and modulation and transmission theory 

    ASSESSMENT CRITERION 9 
    Service information (SI) specifications and program specific information (PSI) is explained as applied in conditional access 

    ASSESSMENT CRITERION 10 
    DVB Transport Stream Analiser equipment used to analise DVB information is explained accurately 

    SPECIFIC OUTCOME 3 
    Add new services to Conditional Access Systems. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Services as specified by the business are added on the system with correct names and tags 

    ASSESSMENT CRITERION 2 
    Services are added in the correct transport streams 

    ASSESSMENT CRITERION 3 
    Product criteria of services added correspond to specific business 

    ASSESSMENT CRITERION 4 
    Services are added to respective bouquets with relevant channel numbers 

    ASSESSMENT CRITERION 5 
    Systems/equipment are critically tested and assessed for satisfactory performance 
    ASSESSMENT CRITERION RANGE 
    Against manufacturer's data/specifications, company specific performance criteria and/or relevant industry standards
     

    ASSESSMENT CRITERION 6 
    The settings and adjustments to components / files ensure optimal functioning 

    SPECIFIC OUTCOME 4 
    Solve problems when adding new services. 
    OUTCOME RANGE 
    Technical, work related, tangible or conceptual problems 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Potential new service problems are identified and evaluated for impact 

    ASSESSMENT CRITERION 2 
    Appropriate responses are formulated to deal with potential new service problems effectively 

    ASSESSMENT CRITERION 3 
    New service problems are identified, diagnosed and solutions formulated that are appropriate and effective 
    ASSESSMENT CRITERION RANGE 
    Tangible and conceptual problems within own area of responsibility, standard or non-standard procedures
     

    ASSESSMENT CRITERION 4 
    Problems that cannot be resolved are reported to relevant persons 

    ASSESSMENT CRITERION 5 
    Status reports reflect the test or outcome of the additions, are clear, accurate and in accordance with worksite practice 

    ASSESSMENT CRITERION 6 
    Feedback is promptly provided to relevant stakeholders on new additions 

    SPECIFIC OUTCOME 5 
    Comply with workplace health and safety requirements during the adding of new services. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Required health and safety practices are known and adhered to at all times 

    ASSESSMENT CRITERION 2 
    Precautions are taken to avoid damage to components, tools and equipment 

    ASSESSMENT CRITERION 3 
    Waste and debris are removed from work sites and disposed of in accordance with environmental requirements 

    ASSESSMENT CRITERION 4 
    Tools and equipment are cared for and stored as per worksite practice 

    ASSESSMENT CRITERION 5 
    Potential health hazards are correctly identified and action appropriate for the context is taken 
    ASSESSMENT CRITERION RANGE 
    Action can include removal, reduction and/or reporting
     


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    Providers of learning towards this unit standard will need to meet the accreditation requirements of the relevant ETQA
    Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.

    Moderation Option: The moderation requirements of the relevant SETA's ETQA must be met in order to award credit to learners for this unit standard 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Essential embedded knowledge will be assessed through assessment of the specific outcomes in terms of the stipulated assessment criteria. Candidates are unlikely to achieve all the specific outcomes, to the standards described in the assessment criteria, without knowledge of the listed embedded knowledge. This means that for the most part, the possession or lack of the knowledge can be directly inferred from the quality of the candidate's performance. Where direct assessment of knowledge is required, assessment criteria have been included in the body of the unit standard
    The following embedded knowledge is addressed in an integrated way in the unit standard:
    2.1 Know Conditional Access Systems
    2.2 Own responsibilities and accountabilities in the workplace
    2.3 Standards and procedures of the organisation
    2.4 Communication techniques when dealing with clients and colleagues
    2.5 Quality assurance of product and service delivery
    2.6 Documentation requirements and procedures
    2.7 Know factors that are important when adding new services
    2.8 Understand processes and back-out plans when adding new services 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking to take remedial action 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others (clients and colleagues) as a member of a team, group, organisation to achieve the required end-result 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves in the work areas and their activities responsibly and effectively to complete tasks within deadlines 

    UNIT STANDARD CCFO COLLECTING 
    Collect and analyse computer network information and critically evaluate the effect of it on work performance 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively (with clients and colleagues), using visual and / or language skills 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology (computer network equipment and systems) effectively and critically showing responsibility towards the environment (work areas and venues) and health of others (clients and colleagues) 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding that the world or work is a set of related systems and that problem-solving does not exist in isolation 

    UNIT STANDARD ASSESSOR CRITERIA 
    Assessors should keep the following principles in mind when designing and conducting assessments against this unit standard:
    3.1 Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the person competent in terms of the title. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.
    3.2 Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the candidate is able to perform in the real situation.
    3.3 Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
    3.4 The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.
    3.5 The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the candidate can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.
    3.6 All assessments should be conducted in line with the following well documented principles of assessment: appropriate, fair, manageable, integrated into work or learning, valid, direct, authentic, sufficient, systematic, open and consistent. 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  48792   Certificate: Broadcast Engineering  Level 5  Level TBA: Pre-2009 was L5  Reregistered  2023-06-30  MICTS 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Footprint Media academy Pty ltd 
    2. NEMISA 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.