SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Undertake factory performance calculations 
SAQA US ID UNIT STANDARD TITLE
114315  Undertake factory performance calculations 
ORIGINATOR
SGB Secondary Agriculture: Processing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Secondary Agriculture 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  15 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
A learner who has achieved this unit standard will be competent in:
Undertaking factory performance calculations to enable effective process control. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
To enter a learning programme for this unit standard or to be assessed against this unit standard, the learner is assumed to have:
Literacy and communications NQF 1.
Numeracy NQF 1.
Basic understanding of sugar processing.
Basic knowledge of quality assurance systems.
An understanding of general safety in the workplace at NQF 1 or equivalent. 

UNIT STANDARD RANGE 
The learner is expected to perform the specific outcomes as reflected in this unit standard without direct supervision, but with access to standard operating procedures. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Demonstrate an understanding of factory performance calculations. 
OUTCOME NOTES 
Demonstrate an understanding of factory performance calculations by:
  • Listing the factory performance terms and parameters
  • Stating the formulae used in the calculations 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:
    Understanding of:
  • The factory performance terms and parameters
  • The formulae used in the calculations
  • Setting-up spreadsheets
    Reasons for:
  • Calculating tons sugar estimated from stock
  • Recording the factory performance indicators
    Consequences of not
  • Assisting with stocktaking procedure
  • Reporting abnormal deviations 

  • SPECIFIC OUTCOME 2 
    Prepare for factory performance calculations. 
    OUTCOME NOTES 
    Prepare for factory performance calculations by:
  • Assisting with stocktaking procedure
  • Obtaining other relevant data
  • Calculating tons sugar estimated from stock 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:
    Understanding of:
  • The factory performance terms and parameters
  • The formulae used in the calculations
  • Setting-up spreadsheets
    Reasons for:
  • Calculating tons sugar estimated from stock
  • Recording the factory performance indicators
    Consequences of not
  • Assisting with stocktaking procedure
  • Reporting abnormal deviations 

  • SPECIFIC OUTCOME 3 
    Perform the calculations. 
    OUTCOME NOTES 
    Perform the calculations by:
  • Applying the standard formulae
  • Setting-up integrated spreadsheets 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:
    Understanding of:
  • The factory performance terms and parameters
  • The formulae used in the calculations
  • Setting-up spreadsheets
    Reasons for:
  • Calculating tons sugar estimated from stock
  • Recording the factory performance indicators
    Consequences of not
  • Assisting with stocktaking procedure
  • Reporting abnormal deviations 

  • SPECIFIC OUTCOME 4 
    Complete the factory performance calculations. 
    OUTCOME NOTES 
    Complete the factory performance calcculations by:
  • Recording the factory performance indicators
  • Reporting abnormal deviations 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:
    Understanding of:
  • The factory performance terms and parameters
  • The formulae used in the calculations
  • Setting-up spreadsheets
    Reasons for:
  • Calculating tons sugar estimated from stock
  • Recording the factory performance indicators
    Consequences of not
  • Assisting with stocktaking procedure
  • Reporting abnormal deviations 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    An individual wishing to be assessed against this unit standard may apply to an assessor accredited by SETASA.
    Any training provider offering learning that will enable achievement of this unit standard must be registered and accredited by SETASA.
    Moderation of assessment will be done by SETASA in its ETQA capacity at its discretion. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Basic understanding of the various factory streams
  • Understanding of the formulae used in factory performance calculations
  • Creating spreadsheets to facilitate the calculation of factory performance data 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team to ensure reliability of data. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and ones own activities to meet deadlines set for procedures to be followed. 

    UNIT STANDARD CCFO COLLECTING 
    Collecting, analysing and critically evaluating information as part of calculating factory performance calculations. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively with others to ensure reliability of data. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems regarding the effect of factory performance calculations on factory operations. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Values
    All learners should demonstrate:
  • An application of company ethics, values as well as general safety and customer care principles
  • An awareness of expectations and obligations of basic worker / management relationship 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  48400   National Certificate: Sugar Processing  Level 2  NQF Level 02  Reregistered  2023-06-30  AgriSETA 
    Elective  49451   Further Education and Training Certificate: Plastics Manufacturing  Level 4  NQF Level 04  Reregistered  2023-06-30  MERSETA 
    Elective  36153   National Certificate: Polymer Composite Fabrication  Level 4  Level TBA: Pre-2009 was L4  Reregistered  2023-06-30  MERSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. DMP Training (PINETOWN) (TP) 
    2. Plastics Federation of South Africa (MAITLAND) (TP) 
    3. Plastics Federation of South Africa (MIDRAND) (TP) 
    4. Plastics Federation of South Africa (WESTMEAD) (TP) 
    5. Polyoak Business School (Pty) Ltd (DIEP RIVER) (TP) 
    6. RCL Foods-Sugar & Milling 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.