SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Produce cutrag 
SAQA US ID UNIT STANDARD TITLE
114125  Produce cutrag 
ORIGINATOR
SGB Secondary Agriculture: Processing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Secondary Agriculture 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  12 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
A learner who has achieved this unit standard will be competent in:
  • Producing cutrag to prescribed quality standards to ensure availability for cigarette production. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    To enter a learning programme for this unit standard or to be assessed against this unit standard, the learner is assumed to have:
  • Literacy and numeracy at NQF level 3
  • Knowledge of the application of quality control during tobacco processing
  • Introduction to the Tobacco Processing Industry 

  • UNIT STANDARD RANGE 
    The learner is expected to perform the specific outcomes as reflected in this unit standard with minimal supervision, but with access to work site procedures and operating instructions.

    The scope of this unit standard deals with producing cutrag after lamina cutting and before cutrag storage.

    Equipment includes, but is not limited to, dryer, cooler, mixing cylinder, bin filler, dosing and weighing belts, and feeders. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Prepare for the production of cutrag. 
    OUTCOME NOTES 
  • Determining the production schedule according to work site procedures
  • Ensuring the serviceability of the process line according to work site procedures
  • Ensuring the availability of required additives according to work site procedures
  • Adjusting production specification settings according to work site procedures
  • Preheating dryer according to operating procedures
  • Ensuring that cut stems and lamina are available according to operating procedures 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Consequences are explained in the event of not:
  • Ensuring the serviceability of the process line
  • Adjusting production specification settings
  • Selecting relevant bin filling station
  • Ensuring a constant process flow
  • Monitoring the equipment for serviceability and taking appropriate action
  • Monitoring the product against quality standards and taking appropriate action
  • Attending to blockages
  • Ensuring the cleanliness of relevant equipment

    The purpose of the following are explained:
  • Determining the production schedule
  • Preheating dryer
  • Ensuring that cut stems and lamina are available
  • Activating the process line
  • Commencing product drying
  • Attending to recovered tobacco
  • Running out and stopping the process line
  • Overseeing the restoration of the work area
  • Informing affected parties
  • Capturing relevant data 

  • SPECIFIC OUTCOME 2 
    Start the cutrag production process. 
    OUTCOME NOTES 
  • Selecting relevant bin filling station according to operating procedures
  • Activating the process line according to operating procedures
  • Commencing product drying according to operating procedures 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Consequences are explained in the event of not:
  • Ensuring the serviceability of the process line
  • Adjusting production specification settings
  • Selecting relevant bin filling station
  • Ensuring a constant process flow
  • Monitoring the equipment for serviceability and taking appropriate action
  • Monitoring the product against quality standards and taking appropriate action
  • Attending to blockages
  • Ensuring the cleanliness of relevant equipment

    The purpose of the following are explained:
  • Determining the production schedule
  • Preheating dryer
  • Ensuring that cut stems and lamina are available
  • Activating the process line
  • Commencing product drying
  • Attending to recovered tobacco
  • Running out and stopping the process line
  • Overseeing the restoration of the work area
  • Informing affected parties
  • Capturing relevant data 

  • SPECIFIC OUTCOME 3 
    Maintain the cutrag production process. 
    OUTCOME NOTES 
  • Ensuring a constant product flow according to operating procedures
  • Monitoring the equipment for serviceability and taking appropriate action according to work site procedures
  • Monitoring the product against quality standards and taking appropriate action according to work site procedures
  • Attending to blockages according to work site procedures
  • Ensuring the cleanliness of relevant equipment according to work site procedures
  • Attending to recovered tobacco according to operating procedures 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Consequences are explained in the event of not:
  • Ensuring the serviceability of the process line
  • Adjusting production specification settings
  • Selecting relevant bin filling station
  • Ensuring a constant process flow
  • Monitoring the equipment for serviceability and taking appropriate action
  • Monitoring the product against quality standards and taking appropriate action
  • Attending to blockages
  • Ensuring the cleanliness of relevant equipment

    The purpose of the following are explained:
  • Determining the production schedule
  • Preheating dryer
  • Ensuring that cut stems and lamina are available
  • Activating the process line
  • Commencing product drying
  • Attending to recovered tobacco
  • Running out and stopping the process line
  • Overseeing the restoration of the work area
  • Informing affected parties
  • Capturing relevant data 

  • SPECIFIC OUTCOME 4 
    Complete cutrag production. 
    OUTCOME NOTES 
  • Running out and stopping the process line according to work site procedures
  • Overseeing the restoration of the work area according to work site procedures
  • Informing affected parties according to work site procedures
  • Capturing relevant data according to work site procedures 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Consequences are explained in the event of not:
  • Ensuring the serviceability of the process line
  • Adjusting production specification settings
  • Selecting relevant bin filling station
  • Ensuring a constant process flow
  • Monitoring the equipment for serviceability and taking appropriate action
  • Monitoring the product against quality standards and taking appropriate action
  • Attending to blockages
  • Ensuring the cleanliness of relevant equipment

    The purpose of the following are explained:
  • Determining the production schedule
  • Preheating dryer
  • Ensuring that cut stems and lamina are available
  • Activating the process line
  • Commencing product drying
  • Attending to recovered tobacco
  • Running out and stopping the process line
  • Overseeing the restoration of the work area
  • Informing affected parties
  • Capturing relevant data 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    An individual wishing to be assessed against this unit standard may apply to an assessor accredited by SETASA.

    Any training provider offering learning that will enable achievement of this unit standard must be registered and accredited by SETASA.

    Moderation of assessment will be done by SETASA in its ETQA capacity at its discretion. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Knowledge of cutrag process
  • Knowledge of control systems and settings on the process line
  • Knowledge of the application of safety measures relating to the production of cutrag
  • Knowledge of quality assurance relating to the production of cutrag 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identifying and solving problems in which responses display that responsible decisions using critical and creative thinking have been made when monitoring the equipment for serviceability, and product against quality standards and taking appropriate action. 

    UNIT STANDARD CCFO WORKING 
    Working effectively with others as a member of a team when monitoring the process and taking appropriate action. 

    UNIT STANDARD CCFO ORGANISING 
    Organizing and managing oneself and one`s activities responsibly and effectively when planning and executing process activities. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicating effectively using visual and/or language skills in the modes of oral and/or written persuasion when monitoring the product against quality standards and taking appropriate action. 

    UNIT STANDARD CCFO SCIENCE 
    Using science and technology effectively and critically, showing responsibility towards the environment and health of others when maintaining the cutrag process. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrating an understanding of the world as a set of related systems by recognizing that problem-solving contexts do not exist in isolation when monitoring the process for deviations and taking appropriate action. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Values:

    All learners should demonstrate:
  • An application of company ethics, values as well as general safety and customer care principles
  • An awareness of expectations and obligations of basic worker/management relationships 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  48637   National Certificate: Tobacco Production  Level 3  NQF Level 03  Reregistered  2023-06-30  AgriSETA 
    Elective  49074   Further Education and Training Certificate: Primary Tobacco Processing  Level 4  NQF Level 04  Reregistered  2023-06-30  AgriSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Afgri Operations (Pty) Ltd 
    2. Mobile Agri Skills Development and Training NPC 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.