SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED QUALIFICATION THAT HAS PASSED THE END DATE: 

Further Education and Training Certificate: Foundry Operations 
SAQA QUAL ID QUALIFICATION TITLE
66489  Further Education and Training Certificate: Foundry Operations 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY NQF SUB-FRAMEWORK
MERSETA - Manufacturing, Engineering and Related Services Education and Training Authority  OQSF - Occupational Qualifications Sub-framework 
QUALIFICATION TYPE FIELD SUBFIELD
Further Ed and Training Cert  Field 06 - Manufacturing, Engineering and Technology  Manufacturing and Assembly 
ABET BAND MINIMUM CREDITS PRE-2009 NQF LEVEL NQF LEVEL QUAL CLASS
Undefined  128  Level 4  NQF Level 04  Regular-Unit Stds Based 
REGISTRATION STATUS SAQA DECISION NUMBER REGISTRATION START DATE REGISTRATION END DATE
Passed the End Date -
Status was "Reregistered" 
SAQA 0695/12  2012-07-01  2013-11-07 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2014-11-07   2017-11-07  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This qualification is replaced by: 
Qual ID Qualification Title Pre-2009 NQF Level NQF Level Min Credits Replacement Status
91785  Occupational Certificate: Moulder  Not Applicable  NQF Level 04  364  Complete 
91877  Occupational Certificate: Melter  Not Applicable  NQF Level 04  361  Complete 

PURPOSE AND RATIONALE OF THE QUALIFICATION 
Purpose:

This qualification is designed to enhance the skills of learners operating within Foundry Operations, manufacturing either quality pattern equipment (wooden patternmaking and metal tooling), or sand composite moulds and cores by hand (floor moulding) or machine (machine moulding and coremaking) for consumption within a metal casting process, or producing the liquid metal (foundry melting) consumed by such metal casting processes.

This qualification gives recognition for the skills, knowledge and values acquired by learners involved with:
  • The inspection, repairs to and manufacture of complex wooden and metal pattern equipment required for the sand moulding process or;
  • The manufacture of complex sand composite moulds and cores or;
  • The control of Foundry Melting processes.

    The main skills learnt in this qualification are the ability to:
  • Produce and read detailed technical sketches and drawings, produce complex pattern equipment, organise and supervise workers and resolve identified non-conformances relating to the patternmaking process. This capability requires an understanding of advanced patternmaking and/or tooling theory and detailed technical drawings as well as a familiarity with the equipment and processes within the environment in which the learner is working or;
  • Make and read detailed technical sketches and drawings, produce complex cores and moulds, organise and supervise workers and resolve identified non-conformances relating to the moulding process. This capability requires an understanding of advanced moulding theory and detailed technical drawings as well as a familiarity with the equipment and processes within the environment in which the learner is working or;
  • Co-ordinate, control and maintain the efficient production of a range of liquid metals. This capability requires an in-depth understanding of the production process, product quality requirements, as well as an understanding of communication, people management and people development theory.

    Practical skills play a large role in this qualification.

    On completion, the learner will receive recognition for the ability to:
  • Determine material requirements.
  • Control the efficient delivery of product by Foundry Operation processes.
  • Produce a range of complex quality products.
  • Optimise and maintain production efficiency.
  • Solve familiar and unfamiliar problems in Foundry Operation processes.
  • Check the quality of products against quality standards.
  • Function in workplaces that use such processes.

    Qualified learners will also understand:
  • Their accountability to ensure compliance with the legislative, safety, health, environmental, quality and risk management systems that govern their workplace.
  • How to implement and ensure adherence to the various organisational policies and procedures.
  • How they are affected by legislation, regulations, agreements and policies related to their particular working environment.

    Qualifying in the exit level outcomes will enable learners to effectively perform a range of workplace activities. What learners achieve in this qualification will also serve as a basis for further learning in the Higher Education and Training band. Learners will also have foundational competence in controlling and co-ordinating the work and output of individuals and/or work teams, relevant to Foundry Operations.

    Rationale:

    The Foundry industry is a complex and specialised sector supplying a vast range of quality metal products to downstream customers. The emergence of South Africa as a cost-effective supplier to international markets has created a demand for people with the skills to manufacture the final products as well as function within the support processes to the manufacturing process. These processes include Foundry Patternmaking, Foundry Moulding and Foundry Melting.

    This is the third in a series of qualifications in Foundry Operations starting at NQF Level 2 and progressing to NQF Level 4. This series of qualifications will enable learners to:
  • Develop their existing skill level and progress vertically in a selected career path within the Foundry industry.
  • Receive recognition for experience gained in the workplace through an RPL process.
  • Obtain skills and knowledge portable within similar metal product manufacturing industries.
  • Gain access to higher levels of learning and learning provision.
  • Access opportunities to progress in their personal life and career, and add value to the operations in which they function.
  • Contribute to the growth of the South African economy and the development of society. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    This qualification assumes learners have a National Certificate in Foundry Operations at NQF Level 3 or equivalent. If the learner does not already have such a qualification, learning in preparation for this qualification would also have to include learning in:
  • Communication at NQF Level 3.
  • Mathematical Literacy.
  • Basic concepts of science and technology related to material, machinery and equipment in use in foundry operation processes at NQF Level 3.

    Recognition of Prior Learning:

    This qualification may be obtained through a process of RPL. The learner should be thoroughly briefed prior to the assessment and support provided and guidance should be provided to assist in the process of developing a portfolio. While this is primarily a workplace-based qualification, evidence from other areas of endeavour may be introduced if pertinent to any of the exit-level outcomes.

    Care should be taken that the process used provides the learner with an opportunity to demonstrate competence and is not too demanding as to prevent learners from taking up the RPL option towards gaining a qualification.

    Access to the Qualification:

    This qualification is designed for learners who:
  • Are new-entry workers to Foundry Operations.
  • Have attended courses and applied the knowledge gained in the workplace.
  • Are already workers and have acquired the skills and knowledge without attending formal courses.
  • Are part of a learnership programme, which integrates structured learning, and work experience.

    Access for learners with physical disabilities is dependent:
  • On the type and severity of disability.
  • On the nature of the Foundry Operations environment and the inherent requirements of equipment operation. 

  • RECOGNISE PREVIOUS LEARNING? 

    QUALIFICATION RULES 
    In order to be awarded this qualification totalling 140 credits, learners have to be declared competent in:

    Fundamental component:

    The Fundamental Component consists of Unit Standards in:
  • Mathematical Literacy at Level 4 to the value of 16 credits.
  • Communication at Level 4 in a First South African Language to the value of 20 credits.
  • Communication in a Second South African Language at Level 3 to the value of 20 credits.

    It is compulsory therefore for learners to do Communication in two different South African languages, one at Level 4 and the other at Level 3.

    All listed unit standards in the Core category of the qualification totalling 26 Credits.

    A selection of specialisation unit standards in the Elective category of the qualification totalling 46 Credits.

    Depending on their area of specialisation (Foundry Patternmaking, Foundry Moulding OR Foundry Melting), learners may choose from the categories.

    Wooden Patternmaking:
  • Unit standard ID 264056: Manufacture complex wooden pattern equipment, NQF Level 4, 40 Credits.
  • Unit standard ID 13301: Produce complex engineering drawings, NQF Level 4, 6 Credits.

    OR

    Metal Tooling:
  • Unit standard ID 264060: Manufacture complex metal tooling, NQF Level 4, 40 Credits.
  • Unit standard ID 13301: Produce complex engineering drawings, NQF Level 4, 6 Credits.

    OR

    Floor Moulding:
  • Unit standard ID 264114: Produce a mould by core assembly, NQF Level 4, 30 Credits.
  • Plus a choice of unit standards from the Elective category of learning to the value of at least 15 Credits.

    OR

    Machine Moulding:
  • Unit standard ID 9922: Adjust and maintain production process, NQF Level 3, 30 Credits.
  • Plus a choice of unit standards from the Elective category of learning to the value of at least 15 Credits.

    OR

    Foundry Melting:
  • Unit standard ID 264376: Demonstrate an understanding of basic physical metallurgy, NQF Level 4, 8 Credits.
  • Unit standard ID 9895: Coordinate predictive and preventive maintenance, NQF Level 5, 12 Credits.
  • Unit standard ID 13194: Perform statistical process control, NQF Level 4, 12 Credits.
  • Plus a choice of unit standards from the Elective category of learning to the value of at least 13 Credits. 

  • EXIT LEVEL OUTCOMES 
    1. Solve a variety of manufacturing problems.

    2. Organise and control resources, individuals and work teams to meet operational requirements.

    3. Enhance manufacturing team performance.

    4. Communicate and present information.

    A choice of the following Exie Level Outcomes depending on the chopsen specialisation area:

    5. Read, interpret and produce complex technical drawings or;

    6. Coordinate and control the Foundry Melting process or;

    7. Manufacture a range of complex Foundry Operation products. 

    ASSOCIATED ASSESSMENT CRITERIA 
    Associated Assessment Criteria for Exit Level Outcome 1:

    1.1 Solutions to manufacturing problems are based on a clear analysis of information gathered through diagnostic procedures.
    1.2 Procedures are amended to respond to unfamiliar problems.
    1.3 Equipment repair and preventive maintenance need is communicated to maintenance specialists according to procedure.
    1.4 Actions related to problem solving are recorded for future reference according to procedure.

    Associated Assessment Criteria for Exit Level Outcome 2:

    2.1 Workplace performance is aligned to meet organisational goals, objectives and targets.
    2.2 Resources are organised to effectively meet workplace objectives.
    2.3 Diversity is harnessed and strengths of a diverse work team is built on according to principles of diversity management.
    2.4 Production activities are performed according to production requirements by work teams.

    Associated Assessment Criteria for Exit Level Outcome 3:

    3.1 Dynamics within a specific group is understood according to group dynamics.
    3.2 Procedures related to legislation are implemented according to legislation.
    3.3 Individuals and team members are motivated using a current motivational model.
    3.4 Learning outcomes are assessed in terms of assessment procedures.
    3.5 Plan of action is developed and team performance is enhanced.

    Associated Assessment Criteria for Exit Level Outcome 4:

    4.1 Meetings with team members, peers, management and maintenance specialists are conducted clearly and reliably.
    4.2 Conditions, evidence, incidences and trends are accurately and timely reported and discussed.
    4.3 Records are made available for scrutiny and future reference.

    Associated Assessment Criteria for Exit Level Outcome 5:

    5.1 Components and assemblies to be manufactured are identified and requirements from technical drawing are interpreted.
    5.2 Technical drawing specifications are met by manufactured components and assemblies.

    Associated Assessment Criteria for Exit Level Outcome 6:

    6.1 Foundry Melting processes are monitored and adjusted according to manufacturing and customer requirements.
    6.2 Product test results are analysed and interpreted and corrective action.
    6.3 Trends are determined and discussed with relevant roleplayers.
    6.4 A clean and safe work area is maintained according to procedures.
    6.5 Production cost is monitored and controlled.
    6.6 Quality, safety, health, environmental and risk management specifications are met according to specifications.

    Associated Assessment Criteria for Exit Level Outcome 7:

    7.1 Technical drawings are read, interpreted and drawn.
    7.2 Foundry Operations process and product is monitored.
    7.3 Production process is brought back into specification and indicators are responded to when deviations occur.
    7.4 Drawing, output and quality requirements are met.
    7.5 A clean and safe work area is maintained.
    7.6 Quality, safety, health, environmental and risk management specifications are met.

    Integrated Assessment:

    Integrated assessment at the level of the qualification provides an opportunity for learners to show they are able to integrate concepts, actions and ideas achieved across a range of unit standards and contexts.

    Integrated assessment must evaluate the quality of observable performance as well as the thinking behind the performance, and must be based on a summative assessment guide. The guide will spell out how the assessor will assess different aspects of the performance and will include:
  • Observing the learner at work (both in the primary activity as well as other interactions).
  • Asking questions and initiating short discussions to test understanding.
  • Looking at records and reports in the portfolio and reviewing previous assessments.

    In some cases, inference will be necessary to determine competence depending on the nature and context within which performance takes place.

    Since this is a foundational qualification, it is necessary to ensure that the fundamental part of the qualification is also targeted to ensure that while the competence may have been achieved in a particular context, learners are able to apply it in a range of other contexts and for further learning. The assessment should also ensure that all the critical cross-field outcomes have been achieved.

    The learner may choose in which language she/he wants to be assessed. This should be established as part of a process of preparing the learner for assessment and familiarising the learner with the approach being taken.

    While this is primarily a workplace-based qualification, evidence from other areas of endeavour may be introduced if pertinent to any of the exit-level outcomes. The assessment process should cover both the explicit tasks required for the qualification as well as the understanding of the concepts and principles that underpin the activities associated with Foundry Operations. 

  • INTERNATIONAL COMPARABILITY 
    An extensive international search was conducted for evidence of comparable education and training systems. Countries included in the search were Australia, New Zealand, Britain, Scotland, Canada, North and South America, Sweden, Finland, Germany and South African SADC countries.

    Despite the fact that Foundry Operations are evident and well developed world-wide, relatively little sources of outcomes-based, standards-based and/or learning material could be found during the research. Indications are that operatives are trained on the job by skilled co-workers, supported by equipment and input material suppliers.

    Additional to this, subject matter experts party to the standards generation process contacted their international counterparts to establish what learning processes they have available. There is evidence of training material, although not aligned to any formal qualification framework.

    The only detailed information found, related to the New Zealand Qualifications Authority, where reference was found within the National Certificate Metal Casting (Technology) (Level 4), reference ID 0129. This qualification embraces both Engineering as well as Foundry (Patternmaking and Moulding) disciplines.

    The comparison was made difficult because neither the fundamental learning elements nor some of the generic core elements are specified. A further complication is brought about by the fact that the learning required crosses several levels. Further to this, the New Zealand qualification does not specify the level of complexity that has to be achieved. The applied competence in the South African qualification focuses on achieving a specific level of competence required by a person working in a real-world Foundry Operations context in which a degree of specialisation, experience and problem-solving ability is required.

    Further comparison elements are highlighted below.

    Comparison Element; New Zealand Metal Casting qualifications; This Foundry Operations qualification suite:
  • Scope; Nominal competence in a wide range of mechanical engineering skills; Mastery of specific foundry moulding skills in context.
  • Approach; Task based; Skills development-based.
  • Level(s); Level 1, 2, 3 and 4; Level 2, 3 and 4.
  • Context; Partly contextualised; Contextual.
  • Assessment; Institution or work-based; Work-based and portfolio-based.
  • Essential embedded knowledge; Not clear; Specified.
  • Credits; 20, 124, 88 and 75 respectively; 120, 126 and 140 respectively.
  • Fundamental learning; Not formally specified; Specified.
  • Business relations; Not formally specified; Specified.
  • Working with and developing others; Not formally specified; Specified.
  • Life skills; Not formally specified; Specified.

    There are considerable similarities in the competencies required but the approach of the South African qualification looks at whole-person development in not only technological, but also in team- and business-related skills and makes explicit assumptions related to level of schooling and life skills.

    It is evident that the technical content of this qualification for Foundry Operations places emphasis on safety, quality and best practice but is of better quality and greater value to learners when compared with that found during the research. 

  • ARTICULATION OPTIONS 
    The qualification has been designed and structured so that qualifying learners can move both horizontally from one area of specialisation (Foundry Patternmaking, Foundry Moulding, Foundry Melting) to another, and vertically, further specialising in a particular skills area.

    This qualification articulates horizontal with the following qualifications:
  • ID 66513: Further Education and Training Certificate in Foundry Patternmaking, NQF Level 4.
  • ID 21010: National Certificate in Iron and Steel Manufacturing, NQF Level 4.
  • ID 49403: National Certificate in Steel Tube and Pipe Manufacturing (Seamless Hot-Finished OR Welded OR Cold-Formed), NQF Level 4.
  • ID 21016: National Certificate in Metal and Engineering Manufacturing, NQF Level 4.
  • ID 36153: National Certificate: Polymer Composite Fabrication, NQF Level 4.
  • ID 23281: National Certificate: Mechanical Engineering: Tooling Manufacture, NQF Level 4.

    This qualification articulates vertical with the following qualifications:
  • ID 22433: National Certificate: Manufacturing and Assembly, NQF level 5.
  • ID 22028: National Certificate: Tool and Jigmaker, NQF Level 5.
  • ID 22435: National Diploma: Engineering and Related Design, NQF Level 5.

    The qualification should also, in terms of the fundamental, non-manufacturing unit standards and other portable skills, articulate with any other qualification at level 4 and 5 in the field of engineering and manufacturing processes.

    The qualification has been designed so that the learner can meaningfully articulate into the higher education and training band once s/he has obtained a NQF Level 4 qualification in Foundry Operations.

    Employers, learners and/or institutions should be able to evaluate the outcomes of these qualifications against the needs of a production context and structure top-up learning appropriately. Equally, holders of other qualifications may be evaluated against this qualification for the purpose of RPL. 

  • MODERATION OPTIONS 
    Moderators for this qualification should be qualified and accredited with an appropriate ETQA. To assure the quality of the assessment process, the moderation should cover one or more of the following:
  • Assessor credentials.
  • The assessment instrument(s).
  • The assessment process (including preparation and post-assessment feedback). 

  • CRITERIA FOR THE REGISTRATION OF ASSESSORS 
    The following criteria should be applied by the relevant ETQA:
  • At least a NQF level 5 manufacturing process qualification with relevant workplace experience of at least 12 months in the field of Foundry Operations or equivalent. The subject matter experience of the assessor can be established by recognition of prior learning.
  • Appropriate experience and understanding of assessment theory, processes and practices.
  • Good interpersonal skills and the ability to balance the conflicting requirements of:
    > Maintaining national standards.
    > The interests of the learner.
    >The interest of the organisation.
    > The need for transformation and redressing the legacies of the past.
    > The cultural background and language of the learner.
  • Registration as an assessor with the relevant ETQA.
  • Any other criteria required by the relevant ETQA. 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this qualification was Reregistered in 2012. 

    NOTES 
    This Qualification has been replaced by Qualification 91877, which is Occupational Certificate: Melter, Level 4, 361 Credits, and Qualification 91785, which is Occupational Certificate: Moulder, Level 4, 364 Credits. 

    UNIT STANDARDS: 
      ID UNIT STANDARD TITLE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
    Core  242655  Demonstrate knowledge and application of ethical conduct in a business environment  Level 4  NQF Level 04 
    Core  120344  Demonstrate knowledge and understanding of relevant current occupational health and safety legislation  Level 4  NQF Level 04 
    Core  114877  Formulate and implement an action plan to improve productivity within an organisational unit  Level 4  NQF Level 04 
    Core  13224  Monitor the application of safety, health and environmental protection procedures  Level 4  NQF Level 04 
    Core  120375  Participate in the estimation and preparation of cost budget for a project or sub project and monitor and control actual cost against budget  Level 4  NQF Level 04 
    Fundamental  119472  Accommodate audience and context needs in oral/signed communication  Level 3  NQF Level 03 
    Fundamental  119457  Interpret and use information from texts  Level 3  NQF Level 03 
    Fundamental  119467  Use language and communication in occupational learning programmes  Level 3  NQF Level 03 
    Fundamental  119465  Write/present/sign texts for a range of communicative contexts  Level 3  NQF Level 03 
    Fundamental  9015  Apply knowledge of statistics and probability to critically interrogate and effectively communicate findings on life related problems  Level 4  NQF Level 04 
    Fundamental  119462  Engage in sustained oral/signed communication and evaluate spoken/signed texts  Level 4  NQF Level 04 
    Fundamental  119469  Read/view, analyse and respond to a variety of texts  Level 4  NQF Level 04 
    Fundamental  9016  Represent analyse and calculate shape and motion in 2-and 3-dimensional space in different contexts  Level 4  NQF Level 04 
    Fundamental  7468  Use mathematics to investigate and monitor the financial aspects of personal, business, national and international issues  Level 4  NQF Level 04 
    Fundamental  12153  Use the writing process to compose texts required in the business environment  Level 4  NQF Level 04 
    Fundamental  119459  Write/present/sign for a wide range of contexts  Level 4  NQF Level 04 
    Elective  9922  Adjust and maintain production process  Level 3  NQF Level 03  30 
    Elective  244611  Apply problem-solving techniques to make a decision or solve a problem in a real life context  Level 3  NQF Level 03 
    Elective  242820  Maintain records for a team  Level 3  NQF Level 03 
    Elective  13298  Produce detailed engineering drawings  Level 3  NQF Level 03 
    Elective  116930  Use a Graphical User Interface (GUI)-based presentation application to enhance presentation appearance  Level 3  NQF Level 03 
    Elective  116940  Use a Graphical User Interface (GUI)-based spreadsheet application to solve a given problem  Level 3  NQF Level 03 
    Elective  119078  Use a GUI-based word processor to enhance a document through the use of tables and columns  Level 3  NQF Level 03 
    Elective  9890  Anticipate and troubleshoot machine functioning  Level 4  NQF Level 04  16 
    Elective  9905  Change and set tooling  Level 4  NQF Level 04  16 
    Elective  114884  Co-ordinate the improvement of productivity within a functional unit  Level 4  NQF Level 04 
    Elective  13261  Conduct laboratory tests on manufactured products and raw materials  Level 4  NQF Level 04  10 
    Elective  264376  Demonstrate an understanding of basic physical metallurgy and its applications  Level 4  NQF Level 04 
    Elective  13952  Demonstrate basic understanding of the Primary labour legislation that impacts on a business unit  Level 4  NQF Level 04 
    Elective  13331  Diagnose and repair faults on tooling during the production run  Level 4  NQF Level 04  24 
    Elective  12544  Facilitate the preparation and presentation of evidence for assessment  Level 4  NQF Level 04 
    Elective  10980  Induct a new employee  Level 4  NQF Level 04 
    Elective  117156  Interpret basic financial statements  Level 4  NQF Level 04 
    Elective  13235  Maintain the quality assurance system  Level 4  NQF Level 04 
    Elective  264060  Manufacture complex metal tooling  Level 4  NQF Level 04  40 
    Elective  264056  Manufacture complex wooden pattern equipment  Level 4  NQF Level 04  40 
    Elective  14586  Monitor and control quality control practices in a manufacturing/engineering environment  Level 4  NQF Level 04 
    Elective  13194  Perform statistical process control  Level 4  NQF Level 04  12 
    Elective  115112  Plan and set up testing programme to investigate quality issues and recommend changes  Level 4  NQF Level 04  20 
    Elective  264114  Produce a mould by core assembly  Level 4  NQF Level 04  30 
    Elective  264094  Produce a strickle mould  Level 4  NQF Level 04  30 
    Elective  13301  Produce complex engineering drawings  Level 4  NQF Level 04 
    Elective  9889  Set up production machines  Level 4  NQF Level 04  30 
    Elective  10981  Supervise work unit to achieve work unit objectives (individuals and teams)  Level 4  NQF Level 04  12 
    Elective  115753  Conduct outcomes-based assessment  Level 5  Level TBA: Pre-2009 was L5  15 
    Elective  12665  Control production and resource scheduling and planning in a manufacturing environment  Level 5  Level TBA: Pre-2009 was L5 
    Elective  9895  Coordinate predictive and preventive maintenance  Level 5  Level TBA: Pre-2009 was L5  12 
    Elective  13203  Counsel workgroup members in respect of HIV/AIDS  Level 5  Level TBA: Pre-2009 was L5 
    Elective  114274  Demonstrate and apply an understanding of the Basic Conditions of Employment Act (Act 75 of 1997)  Level 5  Level TBA: Pre-2009 was L5 
    Elective  114278  Demonstrate and apply an understanding of the Labour Relations Act (Act 66 of 1995)  Level 5  Level TBA: Pre-2009 was L5  12 
    Elective  264055  Design pattern and/tooling for industry  Level 5  Level TBA: Pre-2009 was L5  15 
    Elective  264074  Develop a metal casting process  Level 5  Level TBA: Pre-2009 was L5  30 
    Elective  12458  Develop the skills of a work team  Level 5  Level TBA: Pre-2009 was L5  10 
    Elective  15233  Harness diversity and build on strengths of a diverse working environment  Level 5  Level TBA: Pre-2009 was L5 
    Elective  12674  Perform auditing activities  Level 5  Level TBA: Pre-2009 was L5  12 


    LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION: 
    When qualifications are replaced, some of their learning programmes are moved to being recorded against the replacement qualifications. If a learning programme appears to be missing from here, please check the replacement.
     
    NONE 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.